Hostname: page-component-848d4c4894-4hhp2 Total loading time: 0 Render date: 2024-05-14T13:39:06.217Z Has data issue: false hasContentIssue false

On-Chip Initiation and Burn Rate Measurements of Thermite Energetic Reactions

Published online by Cambridge University Press:  26 February 2011

Steven Apperson
Affiliation:
sja895@mizzou.edu, University of Missouri, Columbia, Electrical and Computer Engineering
Shantanu Bhattacharya
Affiliation:
sbn74@mizzou.edu, University of Missouri, Columbia, Biological Engineering Department
Yuanfang Gao
Affiliation:
gaoy@missouri.edu, University of Missouri, Columbia, Electrical and Computer Engineering, United States
Subramanian Senthil
Affiliation:
senthils@missouri.edu, University of Missouri, Columbia, Electrical and Computer Engineering, United States
Shameem Hasan
Affiliation:
hasans@missouri.edu, University of Missouri, Columbia, Electrical and Computer Engineering, United States
Maruf Hossain
Affiliation:
hossainm@missouri.edu, University of Missouri, Columbia, Electrical and Computer Engineering, United States
Rajesh Shende
Affiliation:
shender@missouri.edu, University of Missouri, Columbia, Electrical and Computer Engineering, United States
Paul Redner
Affiliation:
paul.redner@us.army.mil, US army ARDEC, Picatinny,NJ, United States
Deepak Kapoor
Affiliation:
deepak.kapoor@us.army.mil, US army ARDEC, Picatinny,NJ, United States
Steven Nicolich
Affiliation:
steven.nicolich@us.army.mil, US army ARDEC, Picatinny,NJ, United States
Keshab Gangopadhyay
Affiliation:
gangopadhyayk@missouri.edu, University of Missouri, Columbia, Electrical and Computer Engineering, United States
Shubhra Gangopadhyay
Affiliation:
gangopadhyays@missouri.edu, University of Missouri, Columbia, Electrical and Computer Engineering, United States
Get access

Abstract

Burn rates of various nano-energetic composites were measured by two techniques; on-chip method and conventional optical method. A comparison is presented to confirm the validity of on-chip method. On-chip initiators were prepared using platinum heater films and nanoenergetic composites. Thin film Pt heaters were fabricated with different dimensions and ignition delay was studied using a nano-energetic composite of CuO nano-rods and Al-nano-particles. The ignition delay as a function of electrical power is presented for the same energetic composite. Heater with smaller surface area is found to be more efficient, which may be due to the lower heat losses.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Granier, J. J., Pantoya, M. L., Combust. Flame. 138, pp. 373, (2004).Google Scholar
2. Gavens, A. J., Heerden, D. V., Mann, A. B., Reiss, M. E., Weihs, T. P., J. 1255, (2000).Google Scholar
3. Bhattacharya, S., Gao, Y., Apperson, S., Subramaniam, S., Talantsev, E., Shende, R. V., Gangopadhyay, S., Journal of Energetic Materials, 24, pp. 115, (2006).Google Scholar
4. Gangopadhyay, S., Shende, R. V., Subramaniam, S., Apperson, S., Bhattacharya, S., On-Chip Igniter and Method of Manufacture, US Patent filed, (2005).Google Scholar
5. Joan, E., Mardare, A. I., Mardare, C. C., Fernandes, J. A., Jap. J. Appl. Phys., 42, pp L863 (2003).Google Scholar
6. Moritz, W., Roth, U., Heyde, M., Rademann, K., Reichling, M., Hartmann, J., Thin- Solid, Films, 391, pp 143 (2001).Google Scholar
7. Gangopadhyay, S., Shende, R. V., Subramaniam, S., Hasan, S., Gangopadhyay, K. Ordered Nanoenergetic Composite and Synthesis Method, US Patent filed, (2005).Google Scholar
8. Subramaniam, S., MS Thesis, University of Missouri-Columbia, submitted to graduaschool (2005).Google Scholar