Hostname: page-component-7bb8b95d7b-s9k8s Total loading time: 0 Render date: 2024-09-19T15:06:13.883Z Has data issue: false hasContentIssue false

Temperature-Dependent Internal Friction in Silicon Nanoelectromechanical Systems

Published online by Cambridge University Press:  17 March 2011

Stephane Evoy
Affiliation:
Department of Electrical and Computer Engineering, Virginia Tech, Blacksburg, VA 24061
Anatoli Olkhovets
Affiliation:
Cornell Center for Materials Research, Cornell University, Ithaca, NY 14851
Dustin W. Carr
Affiliation:
Bell Laboratories, Lucent Technologies, Murray Hill, NJ 07974
Jeevak M. Parpia
Affiliation:
Cornell Center for Materials Research, Cornell University, Ithaca, NY 14851
Harold G. Craighead
Affiliation:
Cornell Center for Materials Research, Cornell University, Ithaca, NY 14851
Get access

Abstract

The mechanical properties of micro- and nanomechanical systems are of interest from both fundamental and technological standpoints. High-frequency mechanical resonators presenting high quality factors are of interest for the development of sensitive force detecting devices, and highly efficient RF electromechanical filters and oscillators. Internal losses are the combination of both extrinsic and intrinsic issues that must be well understood for the optimization of resonator quality, and for the experimental access to fundamental nanoscopic mechanical phenomena. The temperature dependent internal friction in 1-10 MHz paddle oscillators is reported. Quality factors as high as 1000 and 2500 are observed at room temperature in metallized and non-metallized devices, respectively. Internal friction peaks are observed in all devices in the T = 160-180 K range. The position of those peaks is consistent with the Debye relaxation of previously reported surface and near-surface phenomena.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Craighead, H. G., “Nanoelectromechanical Systems”, Science 290, 1532 (2000).Google Scholar
[2] Cleland, A. N. and Roukes, M. L., Nature 392, 160 (1998).Google Scholar
[3] Stowe, T. D., Yasumura, K., Kenny, T. W., Botkin, D., Wago, K., and Rugar, D., Appl. Phys. Lett. 71, 288 (1997).Google Scholar
[4] Bannon, F.D., Clark, J.R., and Nguyen, CT-C, IEEE Journal of Solid-State Circuits, 35, 512 (2000).Google Scholar
[5] Yasumura, K. Y., Stowe, T. D., Chow, E. M., Pfafman, T., Kenny, T. W., Stipe, B. C., and Rugar, D., IEEE J. of Microelectromechanical Systems 9, 117 (2000).Google Scholar
[6] Stowe, T. D., Yasumura, K., Kenny, T. W., Botkin, D., Wago, K., and Rugar, D., Appl. Phys. Lett. 71, 288 (1997).Google Scholar
[7] Carr, D. W., Evoy, S., Sekaric, L., Parpia, J. M., and Craighead, H. G., Appl. Phys. Lett. 75, 920 (1999).Google Scholar
[8] Evoy, S., Carr, D. W., Sekaric, L., Olkhovets, A., Parpia, J. M., and Craighead, H. G., J. Appl. Phys., 86, 6072 (1999).Google Scholar
[9] Carr, D. W., Evoy, S., Sekaric, L., Olkhovets, A., Parpia, J. M., and Craighead, H. G., Appl. Phys. Lett. 77, 1545 (2000).Google Scholar
[10] Carr, D. W., Sekaric, L., and Craighead, H. G., J. Vac. Sci. Technol. B 16, 3821 (1998).Google Scholar
[11] Ke, T. S., Phys. Rev. 72, 41 (1947).Google Scholar