Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Morales-Rivas, Lucia
González-Orive, Alejandro
Garcia-Mateo, Carlos
Hernández-Creus, Alberto
Caballero, Francisca G.
and
Vázquez, Luis
2015.
Nanomechanical characterization of nanostructured bainitic steel: Peak Force Microscopy and Nanoindentation with AFM.
Scientific Reports,
Vol. 5,
Issue. 1,
Gao, Li
Harada, Yohei
and
Kumai, Shinji
2015.
Microstructural characterization of aluminum alloys using Weck's reagent, part II: Coloring mechanism.
Materials Characterization,
Vol. 107,
Issue. ,
p.
434.
Bonyár, Attila
and
Szabó, Péter J.
2015.
A Method for the Determination of Ferrite Grains with a Surface Normal close to the (111) Orientation in Cold Rolled Steel Samples with Color Etching and Optical Microscopy.
Materials Science Forum,
Vol. 812,
Issue. ,
p.
297.
Britz, D.
Hegetschweiler, A.
Roberts, M.
and
Mücklich, F.
2016.
Reproducible Surface Contrasting and Orientation Correlation of Low-Carbon Steels by Time-Resolved Beraha Color Etching.
Materials Performance and Characterization,
Vol. 5,
Issue. 5,
p.
553.
Reisinger, S.
Ressel, G.
Eck, S.
and
Marsoner, S.
2017.
Differentiation of grain orientation with corrosive and colour etching on a granular bainitic steel.
Micron,
Vol. 99,
Issue. ,
p.
67.
Gabbardo, Aline D.
Wang, Xi
Huggins, Angeire
and
Frankel, G. S.
2018.
Mechanism of Etching of Al-4.5Mg-1.0Mn Alloy.
Microscopy and Microanalysis,
Vol. 24,
Issue. 4,
p.
374.
Bonyár, Attila
Renkó, József
Kovács, Dorina
and
Szabó, Péter J.
2019.
Understanding the mechanism of Beraha-I type color etching: Determination of the orientation dependent etch rate, layer refractive index and a method for quantifying the angle between surface normal and the 〈100〉, 〈111〉 directions for individual grains.
Materials Characterization,
Vol. 156,
Issue. ,
p.
109844.
Renkó, József Bálint
Bonyár, Attila
and
Jánoš Szabó, Péter
2020.
Effect of Beracha-I type color etchant on the ferrite phase in different type Fe-C alloys.
IOP Conference Series: Materials Science and Engineering,
Vol. 903,
Issue. 1,
p.
012054.
Renkó, József Bálint
Bonyár, Attila
and
Szabó, Péter János
2020.
Development of Microfluidic Cell for Liquid Phase Layer Deposition Tracking.
Acta Materialia Transylvanica,
Vol. 3,
Issue. 2,
p.
94.
Bíró, Tamás
and
Renkó, József Bálint
2021.
Design and Manufacture of a Microfluidic Cell To Be Used With a Spectroscopic Ellipsometer.
Acta Materialia Transylvanica,
Vol. 4,
Issue. 1,
p.
28.
Renkó, József Bálint
Romanenko, Alekszej
Szabó, Péter János
Sulyok, Attila
Petrik, Péter
and
Bonyár, Attila
2022.
Analysis of structural and chemical inhomogeneity of thin films developed on ferrite grains by color etching with Beraha-I type etchant with spectroscopic ellipsometry and XPS.
Journal of Materials Research and Technology,
Vol. 18,
Issue. ,
p.
2822.
Roscioli, Gianluca
Repka, Matej
Pedrazzini, Stella
and
Tasan, Cemal Cem
2022.
Chemo-mechanical effects on the cutting-induced mixed-mode II-III fracture of martensitic stainless steels: An in-situ investigation.
Acta Materialia,
Vol. 231,
Issue. ,
p.
117803.
Renkó, József Bálint
Szabó, Péter János
and
Bonyár, Attila
2023.
Correlation between the developed layer's color and crystallographic orientation of pure copper during long-term color etching with Beraha˗I.
Journal of Materials Research and Technology,
Vol. 23,
Issue. ,
p.
4346.