No CrossRef data available.
Article contents
Fine particle preparation and electrode property of layered-type LiNi0.4Co0.6-xTixO2
Published online by Cambridge University Press: 03 February 2012
Abstract
Layered-type LiNi0.4Co0.6-xTixO2 (0≤x≤0.2) were prepared by conventional electrostatic spray deposition method for studying the correlation of crystal structure and electrode property. Starting materials used were LiNO3, Ni(NO3)2·6H2O, Co(NO3)2·6H2O and TiO2 nano-slurry. These materials were dissolved or dispersed in a mixture of ethanol and butyl carbitol and mixed by predefined ratio, respectively. Then, each of mixtures was sprayed and dried on the grounded reaction plate which was heated at 400 °C. Deposited powder was sintered at 700˚C for 10 hours in air atmosphere. Library of LiNi0.4Co0.6-xTixO2 (0≤x≤0.2) was indexed R-3m by powder X-ray diffraction patterns and its chemical compositions from ICP emission spectroscopy method corresponded to the initial composition conditions. From the diffracted intensity ratio of I(003)/I(104) and the structure refinement by Rietveld method, it was found that the proportion of cation mixing effect increased with increasing amount of Ti among of transition metals. And, from the observation by scanning electron microscope and the calculation by Scherrer’s method, the crystallite size decreased with increasing amount of Ti element. From the charge-discharge property of LiNi0.4Co0.6-xTixO2 (0≤x≤0.2) library, LiNi0.4Co0.5Ti0.1O2 showed better cycle behavior among the library.
- Type
- Research Article
- Information
- MRS Online Proceedings Library (OPL) , Volume 1425: Symposium UU – Combinatorial and High-Throughput Methods in Materials Science , 2012 , mrsf11-1425-uu05-03
- Copyright
- Copyright © Materials Research Society 2012