Article contents
An unsteady numerical analysis of a generic non-axisymmetric turbine endwall in a 1½ stage turbine test rig
Published online by Cambridge University Press: 27 January 2016
Abstract
As concern for the environment increases, so does the desire to reduce emissions and improve fuel efficiency. One avenue being investigated in the aerospace industry is the reduction in losses in a gas turbine engine through endwall contouring, which has shown some promise in improving efficiency. The current investigation was aimed at investigating the unsteady effects downstream of a rotor with a non-axisymmetric endwall contour originally designed for a cascade.
Previous investigations (numerical and experimental) have shown that the endwall contour improved the turbine efficiency by reducing the cross passage secondary flows. The contour however had a detrimental effect on the tip flow. The current investigation found that there were negligible unsteady differences between the annular and contoured rotor, with the average comparing well to the steady state results. It was also found that the effects at the tip were due to the experimental blades untwisting during operation.
- Type
- Research Article
- Information
- Copyright
- Copyright © Royal Aeronautical Society 2015
References
- 1
- Cited by