This paper introduces a three-substrate layered transmitarray design that avoids the use of vias, aiming to produce broadband orbital angular momentum (OAM) vortex beams within the Ka-band. The suggested element configuration accomplishes a full 360∘ transmission phase while upholding a 1-dB transmission loss, with an overall thickness measuring 3.4 mm (equivalent to 0.34λ0 at 30.0 GHz). Its balanced unit cell arrangement amplifies its effectiveness in applications involving dual polarization. We examine the transmitarray behavior across four OAM modes (+1, +2, +3, +4 ), unveiling notable mode purity at operating frequency. Specifically, a broadband OAM vortex beam is achieved for the +1 mode during simulation. A square aperture transmitarray fed by a horn antenna is fabricated and measured to validate these simulated findings. Experimental results confirm the successful broadband vortex beam generation for $l = +1$ mode across the frequency spectrum from 27.0 to 40.0 GHz, approximately 43.3%. Additionally, the proposed transmitarray achieves a peak gain of 21.7 dBi, accompanied by an 11.8% aperture efficiency. Noteworthy is the consistent maintenance of mode purity above 86%.

In this paper, a large, compact array antenna that can be expanded in the 2-D plane is proposed for near-field radio frequency identification applications. By the introduction of the fractal structure and corner joint method, the array is easy to expand in the 2-D plane. An antenna element can be divided into a dozen or so loops, and traveling wave distribution makes sure that every loop is excited in a time period. So that a strong and uniform magnetic field could be generated in a large area. As a proof of concept, array antennas with $1 \times 8$, $2 \times 4$, and $3 \times 3$ elements are designed, fabricated, and measured. The measured bandwidth of the antennas covers the entire Chinese standard. Reading distances of the proposed large array antennas achieved up to 57 mm. Results show that the proposed antenna could realize flexibility and extendibility in a large area with stable and uniform magnetic field distribution.

In this paper, a high-order-mode (HOM) (TE330) cavity-fed 45° linear polarized 6×6 slot array antenna is proposed. The 45° linear polarization is achieved by introducing asymmetric cross slots on the HOM cavity, resulting in low profile and wide bandwidth. The antenna array was verified using standard printed circuit board technology. Measured results show that the impedance bandwidth ( $|S_{11}|\le$ −10 dB) is 13.9% (36.98–42.92 GHz), and the peak gain is 19.3 dBi with a 3-dB gain bandwidth of 13.6%. Attributed to its simple structure, low profile, and wide bandwidth, the presented antenna is a good candidate for 5G applications.

A multi-band circularly polarized antenna is proposed for WLAN (2.4/5.3/5.8 GHz) and WiMAX (3.5 GHz) applications. The proposed antenna is constructed of a radiation patch and a reflecting metal ground. Characteristic mode theory is utilized to analyze the modes of the patch and based on these results the antenna is optimized. The −10 dB impedance bandwidths of the proposed antenna are 53.53% (2.4–4.15 GHz) and 47.28% (5.25–8.5 GHz), respectively. The antenna radiates left-handed circular polarization in the lower band and right-handed circular polarization in the upper band. A maximum gain of 10 dBic is achieved for the proposed antenna.

In this paper, high-gain cavity backed patch antenna arrays are proposed based on low temperature co-fired ceramic technology at 140 GHz. By introducing a substrate integrated cavity to the patch antenna element, the gain is enhanced by 3.3 dB. Moreover, a rectangular ring is loaded around the patch for better impedance matching and further gain enhancement. The final simulated maximum gain of the proposed antenna element is 9.8 dBi. Based on the proposed high-gain antenna element, a 4 × 4-element array and an 8 × 8- element array are presented. The 4 × 4-element array shows a measured maximum gain of 16.9 dBi with 9.5 GHz bandwidth (136.2–145.7 GHz) and the 8 × 8-element array shows a measured maximum gain of 21.8 dBi with 9.8 GHz bandwidth(136.7–146.5 GHz), respectively.

This paper presents a cavity-backed dual-slot antenna in 0.13-μm SiGe BiCMOS technology. The dual-slot structure is excited by a cross-shaped strip line and a cavity which is formed by the topmost metal layer connected to the bottom metal layer through vias in between. By adopting dual-slot and cross-shaped feed line, the bandwidth is significantly enhanced by 196% compared with the single-slot antenna with straight feed line. The reason for bandwidth enhancement has been analyzed. The proposed antenna shows a measured impedance bandwidth of 15.2 GHz from 248.2 to 263.4 GHz for |S11| < −10 dB. The simulated and measured peak gains of the cavity-backed dual-slot antenna are −1.3 and −2.1 dBi, respectively. The simulated radiation efficiency is 31.1%. The total size of the antenna is 0.46 mm × 0.48 mm.