3 - Patterns
Published online by Cambridge University Press: 25 January 2010
Summary
Vortex flows paint themselves
The artistlike pictures of vortex flows presented here have been produced by the flow itself. The method of this “natural” flow visualization can be described briefly as follows: The working fluid is water mixed with some paste in order to increase the viscosity. Vortex flows are produced by pulling a stick or similar devices through the fluid or by injecting fluid through a nozzle into the working tank.
The flow visualization is performed in the following way: the surface of the fluid at rest is sparkled with oil paint of different colors diluted with some evaporating chemical. After the vortex structures have formed due to wakes or jets, a sheet of white paper is placed on the surface of the working fluid, where the oil color is attached to the paper immediately. The final results are artistlike paintings of vortex flows which exhibit a rich variety of flow structures.
Mixing in regular and chaotic flows
These photographs show the time evolution of two passive tracers in a low Reynolds number two-dimensional timeperiodic flow. The initial condition corresponds to two blobs of dye, green and orange, located below the free surface of a cavity filled with glycerine. The flow is induced by moving the top and bottom walls of the cavity while the other two walls are fixed. In this experiment the top wall moves from left to right and the bottom wall moves from right to left; both velocities are of the form Usin2(2πt/T), with the same U and the same period T, but with a phase shift of 90°.
- Type
- Chapter
- Information
- A Gallery of Fluid Motion , pp. 28 - 41Publisher: Cambridge University PressPrint publication year: 2004