Structural features resulting from the interaction of a turbulent jet issuing transversely into a uniform stream are described with the help of flow visualization and hot-wire anemometry. Jet-to-crossflow velocity ratios from 2 to 10 were investigated at crossflow Reynolds numbers from 3800 to 11400. In particular, the origin and formation of the vortices in the wake are described and shown to be fundamentally different from the well-known phenomenon of vortex shedding from solid bluff bodies. The flow around a transverse jet does not separate from the jet and does not shed vorticity into the wake. Instead, the wake vortices have their origins in the laminar boundary layer of the wall from which the jet issues. It is argued that the closed flow around the jet imposes an adverse pressure gradient on the wall, on the downstream lateral sides of the jet, provoking 'separation events’ in the wall boundary layer on each side. These result in eruptions of boundary-layer fluid and formation of wake vortices that are convected downstream. The measured wake Strouhal frequencies, which depend on the jet-crossflow velocity ratio, match the measured frequencies of the separation events. The wake structure is most orderly and the corresponding wake Strouhal number (0.13) is most sharply defined for velocity ratios near the value 4. Measured wake profiles show deficits of both momentum and total pressure.
Email your librarian or administrator to recommend adding this journal to your organisation's collection.