- Cited by 22
Cai, Yixiao Li, Hu Karlsson, Mikael Leifer, Klaus Engqvist, Håkan and Xia, Wei 2016. Biomineralization on single crystalline rutile: the modulated growth of hydroxyapatite by fibronectin in a simulated body fluid. RSC Adv., Vol. 6, Issue. 42, p. 35507.
Cheng, Alice Cohen, David J. Boyan, Barbara D. and Schwartz, Zvi 2016. Laser-Sintered Constructs with Bio-inspired Porosity and Surface Micro/Nano-Roughness Enhance Mesenchymal Stem Cell Differentiation and Matrix Mineralization In Vitro. Calcified Tissue International, Vol. 99, Issue. 6, p. 625.
Jin, Ming Yao, Shenglian Wang, Lu-Ning Qiao, Yi and Volinsky, Alex A. 2016. Enhanced bond strength and bioactivity of interconnected 3D TiO2 nanoporous layer on titanium implants. Surface and Coatings Technology, Vol. 304, p. 459.
Wang, Xiaojian Xu, Shanqing Zhou, Shiwei Xu, Wei Leary, Martin Choong, Peter Qian, M. Brandt, Milan and Xie, Yi Min 2016. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. Biomaterials, Vol. 83, p. 127.
Dorozhkin, Sergey V. 2015. Calcium orthophosphate deposits: Preparation, properties and biomedical applications. Materials Science and Engineering: C, Vol. 55, p. 272.
Ho, Wen-Fu Tsou, Hsi-Kai Wu, Shih-Ching Hsu, Shih-Kuang Chuang, Shao-Hsuan and Hsu, Hsueh-Chuan 2014. Effect of ethyl alcohol aging on the apatite formation of a low-modulus Ti-7.5Mo alloy treated with aqueous NaOH. Biomaterials and Biomedical Engineering, Vol. 1, Issue. 1, p. 51.
Pauline, S. Anne and Rajendran, N. 2014. Effect of Sr on the bioactivity and corrosion resistance of nanoporous niobium oxide coating for orthopaedic applications. Materials Science and Engineering: C, Vol. 36, p. 194.
Wang, Yu Wen, Cuie Hodgson, Peter and Li, Yuncang 2014. Biocompatibility of TiO2nanotubes with different topographies. Journal of Biomedical Materials Research Part A, Vol. 102, Issue. 3, p. 743.
Hou, Legan Li, Li and Zheng, Yufeng 2013. Fabrication and Characterization of Porous Sintered Ti–Ag Compacts for Biomedical Application Purpose. Journal of Materials Science & Technology, Vol. 29, Issue. 4, p. 330.
Li, Y C Wong, C S Wen, C and Hodgson, P D 2012. Biodegradable Mg–Zr–Ca alloys for bone implant materials. Materials Technology, Vol. 27, Issue. 1, p. 49.
Chen, Xiaobo Li, Yuncang Hodgson, Peter D. and Wen, Cuie 2011. In vitro behavior of human osteoblast-like cells (SaOS2) cultured on surface modified titanium and titanium–zirconium alloy. Materials Science and Engineering: C, Vol. 31, Issue. 7, p. 1545.
Hsu, Hsueh-Chuan Tsou, Hsi-Kai Hsu, Shih-Kuang Wu, Shih-Ching Lai, Chien-Hung and Ho, Wen-Fu 2011. Effect of water aging on the apatite formation of a low-modulus Ti–7.5Mo alloy treated with aqueous NaOH. Journal of Materials Science, Vol. 46, Issue. 5, p. 1369.
Li, Yuncang Hodgson, Peter D. and Wen, Cui’e 2011. The effects of calcium and yttrium additions on the microstructure, mechanical properties and biocompatibility of biodegradable magnesium alloys. Journal of Materials Science, Vol. 46, Issue. 2, p. 365.
Patete, Jonathan M. Peng, Xiaohui Serafin, Joseph M. and Wong, Stanislaus S. 2011. Quantitatively Probing the Means of Controlling Nanoparticle Assembly on Surfaces. Langmuir, Vol. 27, Issue. 10, p. 5792.
Waterman, J. Pietak, A. Birbilis, N. Woodfield, T. Dias, G. and Staiger, M.P. 2011. Corrosion resistance of biomimetic calcium phosphate coatings on magnesium due to varying pretreatment time. Materials Science and Engineering: B, Vol. 176, Issue. 20, p. 1756.
Zavgorodniy, Alexander V. Borrero-López, Oscar Hoffman, Mark LeGeros, Racquel Z. and Rohanizadeh, Ramin 2011. Mechanical stability of two-step chemically deposited hydroxyapatite coating on Ti substrate: Effects of various surface pretreatments. Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 99B, Issue. 1, p. 58.
Carradò, Adele and Viart, Nathalie 2010. Nanocrystalline spin coated sol–gel hydroxyapatite thin films on Ti substrate: Towards potential applications for implants. Solid State Sciences, Vol. 12, Issue. 7, p. 1047.
Li, Yuncang Xiong, Jianyu Hodgson, Peter D. and Wen, Cui’e 2010. Effects of structural property and surface modification of Ti6Ta4Sn scaffolds on the response of SaOS2 cells for bone tissue engineering. Journal of Alloys and Compounds, Vol. 494, Issue. 1-2, p. 323.
Silva, M A Gomes, P S Vila, M Lopes, M A Santos, J D Silva, R F and Fernandes, M H 2010. New titanium and titanium/hydroxyapatite coatings on ultra-high-molecular-weight polyethylene—in vitroosteoblastic performance. Biomedical Materials, Vol. 5, Issue. 3, p. 035014.
Sobieszczyk, S. 2010. Optimal Features of Porosity of Ti Alloys Considering their Bioactivity and Mechanical Properties. Advances in Materials Sciences, Vol. 10, Issue. 2,
Check if you have access via personal or institutional login
In the present study, pure titanium (Ti) plates were firstly treated to form various types of oxide layers on the surface and then were immersed into simulated body fluid (SBF) to evaluate the apatite-forming ability. The surface morphology and roughness of the different oxide layers were measured by atomic force microscopy (AFM), and the surface energies were determined based on the Owens–Wendt (OW) methods. It was found that Ti samples after alkali heat (AH) treatment achieved the best apatite formation after soaking in SBF for three weeks, compared with those without treatment, thermal or H2O2 oxidation. Furthermore, contact angle measurement revealed that the oxide layer on the alkali heat treated Ti samples possessed the highest surface energy. The results indicate that the apatite-inducing ability of a titanium oxide layer links to its surface energy. Apatite nucleation is easier on a surface with a higher surface energy.
This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.1T. Kokubo , F. Miyaji H.M. Kim : Spontaneous formation of bonelike apatite layer on chemically treated titanium metals. J. Am. Ceram. Soc. 79, 11271996
2A. Moroni , V.L. Caja , E.L. Egger , L. Trinchese E.Y.S. Chao : Histomorphometry of hydroxyapatite coated and uncoated porous titanium bone implants. Biomaterials 15, 9261994
3C.E. Wen , W. Xu , W.Y. Hu P.D. Hodgson : Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications. Acta Biomater. 3, 4032007
4W. Xu , W.Y. Hu , M.H. Li , Q.Q. Ma , P.D. Hodgson C.E. Wen : Sol-gel derived HA/TiO2 double coatings on Ti scaffolds for orthopaedic applications. Trans. Nonferrous Met. Soc. China 16, s2092006
5W. Xu , W.Y. Hu , M. Li C.E. Wen : Sol-gel derived hydroxyapatite/titania biocoatings on titanium substrate. Mater. Lett. 60, 15752006
6L.H. Li , Y.M. Kong , H.W. Kim , Y.W. Kim , H.E. Kim , S.J. Heo J.Y. Koak : Improved biological performance of Ti implants due to surface modification by micro-arc oxidation. Biomaterials 25, 28672004
7M. Uchida , H.M. Kim , T. Kokubo , S. Fujibayashi T. Nakamura : Effect of water treatment on the apatite-forming ability of NaOH-treated titanium metal. J. Biomed. Mater. Res. 63, 5222002
8H.M. Kim , T. Kokubo , S. Fujibayashi , S. Nishiguchi T. Nakamura : Bioactive macroporous titanium surface layer on titanium substrate. J. Biomed. Mater. Res. 52, 5532000
9L. Jonasova , F.A. Muller , A. Helebrant , J. Strnad P. Greil : Hydroxyapatite formation on alkali-treated titanium with different content of Na+ in the surface. Biomaterials 23, 30952002
10S.J. Li , R. Yang , M. Niinomi , Y.L. Hao Y.Y. Cui : Formation and growth of calcium phosphate on the surface of oxidized Ti–29Nb–13Ta–4.6Zr alloy. Biomaterials 25, 25252004
11T. Kokubo , H.M. Kim M. Kawashita : Novel bioactive materials with different mechanical properties. Biomaterials 24, 21612003
12H. Takadama , H.M. Kim , T. Kokubo T. Nakamura : XPS study of the process of apatite formation on bioactive Ti–6Al–4V alloy in simulated body fluid. Sci. Tech. Adv. Mater. 2, 3892001
16X.X. Wang , S. Hayakawa , K. Tsuru A. Osaka : A comparative study of in vitro apatite deposition on heat-, H2O2- and NaOH-treated titanium surfaces. J. Biomed. Mater. Res. 54, 1722001
17M. Kosmulski : The significance of the difference in the point of zero charge between rutile and anatase. Adv. Colloid Interface Sci. 99, 2552002
20X.X. Wang , S. Hayakawa , K. Tsuru A. Osaka : Bioactive titania gel layers formed by chemical treatment of Ti substrate with a H2O2/HCl solution. Biomaterials 23, 13532002
21J.M. Wu , J.F. Liu , S. Hayakawa , K. Tsuru A. Osaka : Low-temperature deposition of rutile film on biomaterials substrates and its ability to induce apatite deposition in vitro. J. Mater. Sci. Mater. Med. 18, 15292007
22T. Peltola , M. Patsi , H. Rahiala , I. Kangasniemi A. Yli-Urpo : Calcium phosphate induction by sol-gel-derived titania coatings on titanium substrates in vitro. J. Biomed. Mater. Res. 41, 5041998
23D.V. Kilpadi J.E. Lemons : Surface energy characterization of unalloyed titanium implants. J. Biomed. Mater. Res. 28, 14191994
24D.V. Kilpadi , J.J. Weimer J.E. Lemons : Effect of passivation and dry heat-sterilization on surface energy and topography of unalloyed titanium implants. Colloids Surf. A 135, 891998
25D.V. Kilpadi , G.N. Raikar , J. Liu , J.E. Lemons , Y. Vohra J.C. Gregory : Effect of surface treatment on unalloyed titanium implants: Spectroscopic analyses. J. Biomed. Mater. Res. 40, 6461998
27G. Altankov , F. Grinnell T. Groth : Studies on the biocompatibility of materials: Fibroblast reorganization of substratum-bound fibronectin on surfaces varying in wettability. J. Biomed. Mater. Res. 30, 3851996
28X. Lu , Z. Zhao Y. Leng : Biomimetic calcium phosphate coatings on nitric-acid-treated titanium surfaces. Mater. Sci. Eng., C 27, 7002007
30Z. Zhong , S. Yin , C. Liu , Y. Zhong , W. Zhang , D. Shi C.A. Wang : Surface energy for electroluminescent polymers and indium–tin–oxide. Appl. Surf. Sci. 207, 1832003
31M. Takemoto , S. Fujibayashi , M. Neo , J. Suzuki , T. Matsushita , T. Kokubo T. Nakamura : Osteoinductive porous titanium implants: Effect of sodium removal by dilute HCl treatment. Biomaterials 27, 26822006
32D.V. Bavykin , J.M. Friedrich F.C. Walsh : Protonated titanates and TiO2 nanostructured materials: Synthesis, properties, and applications. Adv. Mater. 18, 28072006
33R.N. Wenzel : Resistance of solid surfaces to wetting by water. Ind. Eng. Chem. 28, 9881936
Email your librarian or administrator to recommend adding this journal to your organisation's collection.
- ISSN: 0884-2914
- EISSN: 2044-5326
- URL: /core/journals/journal-of-materials-research