Skip to main content
    • Aa
    • Aa
  • Get access
    Check if you have access via personal or institutional login
  • Cited by 8
  • Cited by
    This article has been cited by the following publications. This list is generated based on data provided by CrossRef.

    Evans, Ryan D. Hager, Carl H. Kang, Young Sup and Doll, Gary L. 2015. Comparison of Black Oxide and Tungsten Carbide–Reinforced Diamond-Like Carbon (WC/a-C:H) Surface Treatments for Rolling Element Bearings. Tribology Transactions, Vol. 58, Issue. 3, p. 444.

    Brecher, Christian and Gerlach, Gero 2012. Testing and Wear Analysis of HNS Spindle Ball Bearings Coated with a-C:H:W. Tribology Transactions, Vol. 55, Issue. 4, p. 481.

    Evans, R. D. Shiller, P. J. and Howe, J. Y. 2011. Adhesion of tungsten carbide reinforced amorphous hydrocarbon thin films (WC/a-C:H) to steel substrates for tribological applications. Journal of Applied Physics, Vol. 109, Issue. 2, p. 023518.

    Leonard, Benjamin D. Sadeghi, Farshid Evans, Ryan D. Doll, Gary L. and Shiller, Paul J. 2009. Fretting of WC/a-C:H and Cr2N Coatings Under Grease-Lubricated and Unlubricated Conditions. Tribology Transactions, Vol. 53, Issue. 1, p. 145.

    Evans, Ryan D. Cogdell, J. David Richter, Gerald A. and Doll, Gary L. 2008. Traction of Lubricated Rolling Contacts between Thin-Film Coatings and Steel. Tribology Transactions, Vol. 52, Issue. 1, p. 106.

    Martínez-Martínez, D. López-Cartes, C. Fernández, A. and Sánchez-López, J.C. 2008. Comparative performance of nanocomposite coatings of TiC or TiN dispersed in a-C matrixes. Surface and Coatings Technology, Vol. 203, Issue. 5-7, p. 756.

    Panjan, M. Šturm, S. Panjan, P. and Čekada, M. 2008. The influence of rotation during sputtering on the stoichiometry of TiAlN/CrNx multilayer coating. Surface and Coatings Technology, Vol. 203, Issue. 5-7, p. 554.

    Evans, R.D. Doll, G.L. Meng, W.J. Mei, F. and Glass, J.T. 2007. Effects of applied substrate bias during reactive sputter deposition of nanocomposite tantalum carbide/amorphous hydrocarbon thin films. Thin Solid Films, Vol. 515, Issue. 13, p. 5403.


Influence of Deposition Parameters on the Composition and Structure of Reactively Sputtered Nanocomposite TaC/a-C:H Thin Films

  • Ryan D. Evans (a1), Jane Y. Howe (a2), James Bentley (a2), Gary L. Doll (a3) and Jeffrey T. Glass (a4)
  • DOI:
  • Published online: 01 March 2011

The properties of nanocomposite tantalum carbide/amorphous hydrocarbon (TaC/a-C:H) thin films depend closely on reactive magnetron sputtering deposition process conditions. The chemical composition and structure trends for TaC/a-C:H films were obtained as a function of three deposition parameters: acetylene flow rate, applied direct current (dc) bias voltage, and substrate carousel rotation rate. Films were deposited according to a 23 factorial experimental design to enable multiple linear regression modeling of property trends. The Ta/C atomic ratio, hydrogen content, total film thickness, TaC crystallite size, and Raman spectra were statistically dependent on acetylene flow rate, applied dc bias voltage, or both. Transmission electron microscopy revealed a nanometer-scale lamellar film structure, the periodicity of which was affected mostly by substrate carousel rotation rate. The empirical property trends were interpreted with respect to hypothesized growth mechanisms that incorporate elements of physical vapor deposition and plasma-enhanced chemical vapor deposition.

Corresponding author
a) Address all correspondence to this author. e-mail:
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

3H. Sjostrom and V. Wikstrom : Diamond-like carbon coatings in rolling contacts. Proc. Instn. Mech. Engrs. Part J. 215, 545 (2001).

6H. Dimigen , H. Hubsch and R. Memming : Tribological and electrical properties of metal-containing hydrogenated carbon films. Appl. Phys. Lett. 50, 1056 (1987).

7E. Bergmann and J. Vogel : Tribological properties of metal/carbon coatings. J. Vac. Sci. Technol. A 4, 2867 (1986).

8E. Bergmann and J. Vogel : Influence of composition and process parameters on the internal stress of the carbides of tungsten, chromium, and titanium. J. Vac. Sci. Technol. A 5, 70 (1987).

10C. Benndorf , M. Grischke , H. Koeberle , R. Memming , A. Brauer and F. Thieme : Identification of carbon and tantalum chemical states in metal-doped a-C:H films. Surf. Coat. Technol. 36, 171 (1988).

11W. van Duyn and B. van Lochem : Chemical and mechanical characterization of WC:H amorphous layers. Thin Solid Films 181, 497 (1989).

12M. Grischke , K. Bewilogua and H. Dimigen : Preparation, properties and structure of metal containing amorphous hydrogenated carbon films. Mater. Manuf. Process. 8, 407 (1993).

13K. Bewilogua and H. Dimigen : Preparation of W-C:H coatings by reactive magnetron sputtering. Surf. Coat. Technol. 61, 144 (1993).

14H. Sjostrom , L. Hultman , J.E. Sundgren and L.R. Wallenberg : Microstructure of amorphous C:H and metal-containing C:H films deposited on steel substrates. Thin Solid Films 232, 169 (1993).

15W.J. Meng , T.J. Curtis , L.E. Rehn and P.M. Baldo : Plasma-assisted deposition and characterization of Ti-containing diamondlike-carbon coatings. J. Appl. Phys. 83, 6076 (1998).

16W.J. Meng and B.A. Gillispie : Mechanical properties of Ti-containing and W-containing diamond-like carbon coatings. J. Appl. Phys. 84, 4314 (1998).

17A.A. Voevodin , J.P. O’Neill and J.S. Zabinski : Tribological performance and tribochemistry of nanocrystalline WC/amorphous diamond-like carbon composites. Thin Solid Films 342, 194 (1999).

19P. Villiger , Ch. Sprechter and J.A. Peters : Parameter optimization of Ti-DLC coatings using statistically based methods. Surf. Coat. Technol. 116-119, 585 (1999).

20G. Hakansson , I. Petrov and J.E. Sundgren : Growth of TaC thin films by reactive direct current magnetron sputtering: Composition and structure. J. Vac. Sci. Technol. A 8, 3769 (1990).

21K.W. Gerstenberg and M. Grischke : Thermal gas evolution studies on a-C:H:Ta films. J. Appl. Phys. 69, 736 (1991).

24P.V. Brande , S. Lucas , R. Winand , L. Renard and A. Weymeersch : Study of the formation of a carbon layer on a sputtering target during magnetron-enhanced reactive sputtering. Surf. Coat. Technol. 61, 151 (1993).

25I. Safi : Recent aspects concerning DC reactive magnetron sputtering of thin films: a review. Surf. Coat. Technol. 127, 203 (2000).

27A.C. Ferrari and J. Robertson : Interpretation of Raman spectra of disordered and amorphous carbon. Phys. Rev. B 61, 14095 (2000).

28G.R. Gruzalski and D.M. Zehner : Defect states in substoichiometric tantalum carbide. Phys. Rev. B 34, 3841 (1986).

31J.C. Angus and F. Jansen : Dense “diamondlike” hydrocarbons as random covalent networks. J. Vac. Sci. Technol. A 6, 1778 (1988).

34J. Robertson : Diamond-like amorphous carbon. Mater. Sci. Eng. R. 37, 129 (2002).

35M.A. Tamor and W.C. Vassell : Raman “fingerprinting” of amorphous carbon films. J. Appl. Phys. 76, 3823 (1994).

36G. Adamopoulos , J. Robertson , N.A. Morrison and C. Godet : Hydrogen content estimation of hydrogenated amorphous carbon by visible Raman spectroscopy. J. Appl. Phys. 96, 6348 (2004).

37D. Hofmann , H. Schuessler , K. Bewilogua , H. Hubsch and J. Lemke : Plasma-booster-assisted hydrogenated W-C coatings. Surf. Coat. Technol. 73, 137 (1995).

38K. Bewilogua , C.V. Cooper , C. Specht , J. Schroder , R. Wittorf and M. Grischke : Erratum to: “Effect of target material on deposition and properties of metal-containing DLC (Me-DLC) coatings.” Surf. Coat. Technol. 132, 275 (2000).

39S.J. Park , K.R. Lee , D.H. Ko and K.Y. Eun : Microstructure and mechanical properties of WC-C nanocomposite films. Diamond Relat. Mater. 11, 1747 (2002).

40M. Hans , R. Buchel , M. Grischke , R. Hobi and M. Zach : High-volume PVD coating of precision components of large volumes at low process costs. Surf. Coat. Technol. 123, 288 (2000).

41V.Y. Kulikovsky , F. Fendrych , L. Jastrabik and D. Chvostova : Study of formation and some properties of Ti-C:H films prepared by d.c. magnetron sputtering. Surf. Coat. Technol. 91, 122 (1997).

42B. Shi and W.J. Meng : Intrinsic stresses and mechanical properties of Ti-containing hydrocarbon coatings. J. Appl. Phys. 94, 186 (2003).

43W. Wagner , F. Rauch and M. Grischke : Stoichiometry of a-C:H(Ta) films determined by means of RBS and the 15N technique. Nuc. Inst. Meth. Phys. Res. 111, 111 (1996).

44W.J. Meng , E.I. Meletis , L.E. Rehn and P.M. Baldo : Inductively coupled plasma assisted deposition and mechanical properties of metal-free and Ti-containing hydrocarbon coatings. J. Appl. Phys. 87, 2840 (2000).

46W.J. Meng , R.C. Tittsworth , J.C. Jiang , B. Feng , D.M. Cao , K. Winkler and V. Palshin : Ti atomic bonding environment in Ti-containing hydrocarbon coatings. J. Appl. Phys. 88, 2415 (2000).

47A. Czyzniewski : Deposition and some properties of nanocrystalline WC and nanocomposite WC/a-C:H coatings. Thin Solid Films 433, 180 (2003).

50T. Zehnder , P. Schwaller , F. Munnik , S. Mikhailov and J. Patscheider : Nanostructural and mechanical properties of nanocomposite nc-TiC/a-C:H films deposited by reactive unbalanced magnetron sputtering. J. Appl. Phys. 95, 4327 (2004).

51C. Strondl , N.M. Carvalho , J.Th.M. De Hosson and G.J. van der Kolk : Investigation on the formation of tungsten carbide in tungsten-containing diamond like carbon coatings. Surf. Coat. Technol. 162, 288 (2003).

53J.A. Venables , G.D.T. Spiller and M. Hanbucken : Nucleation and growth of thin films. Rep. Prog. Phys. 47, 399 (1984).

54J.C. Angus and C.C. Hayman : Low-pressure, metastable growth of diamond and diamondlike phases. Science 241, 913 (1988).

55J.J. Cuomo , D.L. Pappas , J. Bruley , J.P. Doyle and K.L. Saenger : Vapor deposition processes for amorphous carbon films with sp3 fractions approaching diamond. J. Appl. Phys. 70, 1706 (1991).

56Y. Lifshitz , S.R. Kasi , J.W. Rabalais and W. Eckstein : Subplantation model for film growth from hyperthermal species. Phys. Rev. B 41, 10468 (1990).

57J. Robertson : Deposition mechanisms for promoting sp3 bonding in diamond-like carbon. Diamond Relat. Mater. 2, 984 (1993).

58J. Robertson : The deposition mechanism of diamond-like a-C and a-C:H. Diamond Relat. Mater. 3, 361 (1994).

59A. Grill , B.S. Meyerson , V.V. Patel , J.A. Reimer and M.A. Petrich : Inhomogeneous carbon bonding in hydrogenated amorphous carbon films. J. Appl. Phys. 61, 2874 (1987).

60A. von Keudell , M. Meier and C. Hopf : Growth mechanism of amorphous hydrogenated carbon. Diamond Relat. Mater. 11, 969 (2002).

61A. von Keudell , T. Schwarz-Selinger and W. Jacob : Simultaneous interaction of methyl radicals and atomic hydrogen with amorphous hydrogenated carbon films. J. Appl. Phys. 89, 2979 (2001).

63J.C. Angus : Empirical categorization and naming of “diamond-like” carbon films. Thin Solid Films 142, 145 (1986).

64H. Windischmann : An intrinsic stress scaling law for polycrystalline thin films prepared by ion beam sputtering. J. Appl. Phys. 62, 1800 (1987).

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *