The effect of hypervolemic-hemodilution, with and without hypertension, on blood-brain barrier permeability was investigated in rats, after 180 minutes of middle cerebral artery occlusion (MCAo), and 60 minutes of reperfusion. One of the following conditions was maintained during MCAo: 1) Control — hematocrit and blood pressure were not manipulated; 2) Hypervolemic-Hemodilution/Normotension — the hematocrit was decreased to 30%; 3) Hypervolemic-Hemodilution/Hypertension — the hematocrit was decreased to 30% and mean arterial pressure increased by 30 mmHg with phenylphrine. In all groups, Evans Blue was administered, and its concentration determined by spectrophotometric assay. Evans Blue (μg{g-1 of brain tissue [mean ± SD]) was greater in the Hypervolemic- Hemodilution/Hypertension group (71 ± 20) versus the Control (13 ± 9) and Hypervolemic-Hemodilution/ Normotension (17 ± 10) groups (p < 0.05). No other differences were present. These results support the hypothesis that during MCAo, hypervolemic-hemodilution/hypertensive therapy effects an increase in blood-brain barrier permeability in the early period of reperfusion.

An a posteriori granddaughter design was applied to estimate quantitative trait loci genotypes of sires with many sons in the US Holstein population. The results of this analysis can be used to determine concordance between specific polymorphisms and segregating quantitative trait loci. Determination of the actual polymorphisms responsible for observed genetic variation should increase the accuracy of genomic evaluations and rates of genetic gain. A total of 52 grandsire families, each with ⩾100 genotyped sons with genetic evaluations based on progeny tests, were analyzed for 33 traits (milk, fat and protein yields; fat and protein percentages; somatic cell score (SCS); productive life; daughter pregnancy rate; heifer and cow conception rates; service-sire and daughter calving ease; service-sire and daughter stillbirth rates; 18 conformation traits; and net merit). Of 617 haplotype segments spanning the entire bovine genome and each including ~5×106 bp, 5 cM and 50 genes, 608 autosomal segments were analyzed. A total of 19 335 unique haplotypes were found among the 52 grandsires. There were a total of 133 chromosomal segment-by-trait combinations, for which the nominal probability of significance for the haplotype effect was <10−8, which corresponds to genome-wide significance of <10−4. The number of chromosomal regions that met this criterion by trait ranged from one for rear legs (rear view) to seven for net merit. For each of the putative quantitative trait loci, at least one grandsire family had a within-family contrast with a t-value of >3. Confidence intervals (CIs) were estimated by the nonparametric bootstrap for the largest effect for each of nine traits. The bootstrap distribution generated by 100 samples was bimodal only for net merit, which had the widest 90% CI (eight haplotype segments). This may be due to the fact that net merit is a composite trait. For all other chromosomes, the CI spanned less than a third of the chromosome. The narrowest CI (a single haplotype segment) was found for SCS. It is likely that analysis by more advanced methods could further reduce CIs at least by half. These results can be used as a first step to determine the actual polymorphisms responsible for observed quantitative variation in dairy cattle.

Thirty-one patients with atypical non-cardiac chest pain which had persisted despite negative medical investigation were treated in a controlled trial of cognitive-behavioural therapy. The average duration of pain was 4·7 years. Patients were randomized to either immediate treatment or as a control to assessment only. Treatment involved teaching patients how to anticipate and control symptoms, and modification of inappropriate health beliefs. The average number of sessions given was 7·2. There were significant reductions in chest pain, limitations and disruption of daily life, autonomic symptoms, distress and psychological morbidity in the treated group as compared with the control group who were unchanged. The assessment-only group were treated subsequently and showed comparable changes. Improvements were fully maintained by both treated groups at four to six-months follow-up.

We report a case of follicular lymphoma in a healthy individual, which presented as saliva- and serum-proven mumps. The patient presented with a sore throat and parotid and submandibular lymphadenopathy. Fine needle aspiration, undertaken three weeks following presentation, revealed no malignant cells. An excision biopsy of a level two node was performed due to persistent lymphadenopathy, five weeks following presentation. As far as we are aware, this is the first reported case of follicular lymphoma presenting as mumps. This case highlights the importance of follow up in patients in whom lymphadenopathy is persistent despite the proven diagnosis of mumps.

A ferritic steel T91 and an oxide dispersion strengthened (ODS) martensitic steel 9Cr-ODS were irradiated with 5 MeV Ni ions at 500°C at a dose rate of 1.38×10-3 dpa/s to doses of 5, 50 and 150 dpa. Both alloys are iron-based with 9Cr and have been designed for use in higher temperature energy systems. However, the radiation effects on these two alloys are not well characterized. For T91, the irradiated microstructure was dominated by tangled dislocation and precipitates, similar to the unirradiated condition except the presence of large dislocation loops of type a<100>. The microstructure of alloy 9Cr-ODS for both the unirradiated and irradiated cases was dominated by dense dislocations, precipitates and yttrium oxides particles and no dislocation loops were observed. The average size of yttrium oxides particles slightly decreased with dose from 11.8 nm for the unirradiated to 9.1 nm at 150 dpa. No voids were detected for both alloys up to a dose of 150 dpa.

The Fezzan Project completed its five-year fieldwork cycle in 2001. The geographical research team located numerous additional palaeolake sites within the Edeyen Ubari, using a combination of Remote Sensing technology and field visits. Additional samples were taken for analysis and dating from many lake edge locations, relating to both the large Pleistocene lake and to the numerous smaller Holocene lakes that have been identified by the team. The excavations at Old Germa were taken down through Garamantian occupation levels to the natural subsoil below the earliest cultural horizon. The earliest activity, represented by a few mudbrick walls and hearths built directly on the natural soil, is believed to date to c. 400-300 BC. Traces of several phases of Garamantian buildings were uncovered, along with numerous rubbish pits, which yielded a rich assemblage of finds, including, for the first time, examples of Garamantian figurines, small 3-D sculptures of humans and animals. Work on the various classes of finds (pottery, small finds, lithics and other stone artefacts, metallurgical evidence, etc.) complemented the excavation work. In addition, a small amount of further survey work was carried out on sites in the Wadi al-Ajal, along with a contour survey of Old Germa and standing building survey at a number of other sites.

Motivated by complex oriented equivariant cohomology theories, we give a natural algebraic definition of an $A$-equivariant formal group law for any abelian compact Lie group $A$. The complex orientedcohomology of the classifying space for line bundles gives an example.We also show how the choice of a complete flag gives rise to a basis and a means of calculation. This allows us to deduce thatthere is a universal ring $L_A$ for $A$-equivariant formal group laws and that it is generated by the Euler classes and the coefficients of the coproduct of the orientation. Westudy a number of topological cases in some detail. 1991 Mathematics Subject Classification: 14L05, 55N22, 55N91, 57R85.

Changes in bulk composition are known to affect both radiation-induced segregation and microstructural development, including void swelling in austenitic stainless steel. In this work, three alloys (designations corresponding to wt%) have been studied: Fe-18Cr-8Ni alloy (bulk composition corresponding to 304 stainless steel), Fe-18Cr-40Ni (bulk composition corresponding to 330 stainless steel), and Fe-16Cr-13Ni (bulk composition corresponding to 316 stainless steel). Following irradiation with high-energy protons, the change in hardness and microstructure (void size distribution and grain boundary composition) due to irradiation was investigated. Increasing the bulk nickel concentration decreases void swelling, increases matrix hardening, and increases grain boundary chromium depletion and nickel enrichment. The analysis shows that decreases in lattice parameter and shear modulus due to radiation- induced segregation (RIS) correlate with decreased void swelling and a decreased susceptibility to irradiation assisted stress corrosion cracking (IASCC). Traditional thinking on IASCC assumed RIS was a contributing factor to cracking. It may, however, be that properly controlled RIS can be used to mitigating cracking.

As part of the shutdown of the EBR-II reactor, structural materials were retrieved to analyze the effects of long-term irradiation on mechanical properties and microstructure. In this work, the effect of low dose rate irradiation (10−7 to 10−8 dpa/s) on grain boundary composition in 316 and 304 stainless steels was analyzed. Samples were taken from surveillance specimens and subassemblies irradiated in the reflector region of EBR-II at temperatures from 371-390°C to maximum doses of 30 dpa. The effects of dose, dose rate, and bulk composition on radiation- induced segregation are analyzed. In 316 stainless steel, changes in grain boundary chromium and nickel concentrations occur faster than changes in iron and molybdenum concentrations. In 304 stainless steel, decreasing the dose rate increases the amount of grain boundary segregation. For a dose of 20 dpa, chromium depletion and nickel enrichment are greater in 304 stainless steel than in 316 stainless steel, the difference most likely due to dose rate. In both 304 and 316 stainless steels, the presence of a grain boundary precipitate significantly changes the composition of the adjacent grain boundary.

The fourth season of the Fezzan Project continued the interdisciplinary approaches of previous seasons. Geographical and environmental work focused principally in sampling sediments for scientific dating and with integrating ground observation with remote sensing data. Excavations continued at Old Germa, where the site has now reached Garamantian levels. In a separate development, the tentative identification has been made of an early mosque at the site, in an area adjacent to the G1 excavation trench. Substantial results were gained from work aimed at enhancing the important data recorded by Charles Daniels in his earlier excavations and survey in the Wadi al-Hayat. The enhancement of the Daniels' survey archive was integrated with completion of the wider prospection being undertaken by the new project. This survey included fieldwalking, standing building survey, analysis of the foggara irrigation systems and recording of rock art scenes. Finds work comprised the finalisation of a pottery type series for the Germa area, the study of small finds from the recent survey work, botanical analysis and completion of lithics recording. A programme of radiocarbon dating is now being undertaken to improve the phasing of sites and monuments. The first two volumes of final reports are now in preparation.

Microstructural examination and in situ post-irradiation annealing studies were carried out on 20% cold-worked 316 stainless steel (SS) hexagonal duct material following irradiation in the reflector region of the EBR-II reactor. Stainless steel hexagonal ducts were used to house reactor subassemblies and provide a valuable source of information on irradiation behavior of reactor structural materials at lower dose-rates (on the order of 10-8 dpa/sec) than previously examined. The microstructural development of samples irradiated to doses of 1, 20 and 30 dpa is examined, while the post-irradiation annealing behavior of a sample irradiated to 20 dpa is described. Annealing studies were performed at 370 and 500°C to examine the kinetics of radiation damage recovery as a function of annealing temperature. The initial (pre-annealed) microstructures consists of a substantial density of irradiation induced chromium-rich M23C6 and M6C carbides which form both on the grain boundaries and within the grain interiors. Recovery of the cold- work is evident in the 1 dpa sample while samples irradiated to 20 and 30 dpa possess dense populations of voids and dislocation structures consisting of networks of line dislocations and faulted dislocation loops. Results indicate that post-irradiation annealing of the samples at 370°C for 1 hour has little effect on the microstructure, while further annealing at 500°C for 1 hour results in void shrinkage, the formation of small cavities, and a reduction in the dislocation loop and network density.

A girl with partial lipodystrophy is described presenting with muscle weakness and developmental delay several years before lipoatrophy became apparent. The patient subsequently developed epilepsy, fatty liver, secondary amenorrhoea, hirsutism, insulin-resistant diabetes mellitus, hyperlipidaemia, and hypothyroidism. She remains weak with poor exercise tolerance. This case illustrates an atypical presentation of the Barraquer–Simon syndrome.