In the absence of the necessary valley topography, karst depressions are sometimes used to construct conventional impoundments in order to contain tailings. Leakage is a primary concern for such impoundments. The purpose of the current study was to determine the characteristics and barrier performance of laterite mantling karst depressions, using, as an example, the Wujiwatang (WJWT) tailings impoundment, located in the Gejiu mining area, southwestern China. The geotechnical-hydrogeological properties, geochemistry, mineral compositions, and particle shapes of the laterite were investigated by geotechnical techniques, chemical analysis, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that the laterite contained poorly sorted particles that covered a wide spectrum of grain sizes (<5 mm to <50 nm), and was unexpectedly categorized as silty clay or silt with a high liquid limit. The continuous gradation and small D90 value helped the laterite achieve saturated hydraulic conductivities in the range of <10–6 cm/s required for impoundment liners. The laterite beneath the tailings impoundment was finer-grained and had a lower permeability than that of the laterite on the depression walls within the same depression. Geochemically and mineralogically, the laterite was classified as true laterite and its major mineralogical constituents were gibbsite and goethite with chlorite occurring in trace amounts. The laterite was dominated by subspherolitic–spherolitic cohesionless grains (concretions) made up of Al, Fe, Ti, and Mn oxides and hydroxides. The laterite did not have plasticity indices in the clay range. Fortunately, slopewash prior to tailings containment selectively transported the finer oxide concretions to the depression floor, creating a natural low-permeability barrier for the WJWT tailings impoundment. This is undoubtedly important for the planning and design of future karst depression-type tailings impoundments around the world.

In order to establish a compact all-optical Thomson scattering source, experimental studies were conducted on the 45 TW Ti: sapphire laser facility. By including a steel wafer, mixed gas, and plasma mirror into a double-exit jet, several mechanisms, such as shock-assisted ionization injection, ionization injection, and driving laser reflection, were integrated into one source. So, the source of complexity was remarkably reduced. Electron bunches with central energy fluctuating from 90 to 160 MeV can be produced. Plasma mirrors were used to reflect the driving laser. The scattering of the reflected laser on the electron bunches led to the generation of X-ray photons. Through comparing the X-ray spots under different experimental conditions, it is confirmed that the X-ray photons are generated by Thomson scattering. For further application, the energy spectra and source size of the Thomson scattering source were measured. The unfolded spectrum contains a large amount of low-energy photons besides a peak near 67 keV. Through importing the electron energy spectrum into the Monte Carlo simulation code, the different contributions of the photons with small and large emitting angles can be used to explain the origin of the unfolded spectrum. The maximum photon energy extended to about 500 keV. The total photon production was 107/pulse. The FWHM source size was about 12 μm.

With the rapid rise in the prevalence of non-tuberculous mycobacteria (NTM) diseases across the world, the microbiological diagnosis of NTM isolates is becoming increasingly important for the diagnosis and treatment of NTM disease. In this study, the clinical presentation, species distribution and drug susceptibility of patients with NTM disease visiting the Chongqing Public Health Medical Centre during March 2016–April 2019 were retrospectively analysed. Among the 146 patients with NTM disease, eight NTM species (complex) were identified. The predominant NTM species in these patients were identified to be Mycobacterium abscessus complex (53, 36.3%), M. intracellulare (38, 26%) and M. fortuitum (17, 11.7%). In addition, two or more species were isolated from 7.5% of the patients. Pulmonary NTM disease (142, 97.3%) showed the highest prevalence among the patients. It was observed that 40.1% of the patients with pulmonary NTM disease had chronic pulmonary obstructive disease and bronchiectasis, while 22.5% had prior tuberculosis. Male patients showed more association with the conditions of cough and haemoptysis than the female patients. In an in vitro antimicrobial susceptibility testing, most of the species showed susceptibility to linezolid, amikacin and clarithromycin, while M. fortuitum exhibited low susceptibility to tobramycin. In conclusion, the prevalence of NTM disease, especially that of the pulmonary NTM disease, is common in Southwest China. Species identification and drug susceptibility testing are thus extremely important to ensure appropriate treatment regimens for patient care and management.

In this paper, the generation of relativistic electron mirrors (REMs) and the reflection of an ultra-short laser off this mirrors are discussed, applying two-dimensional particle-in-cell (2D-PIC) simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapidly expanding. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads the resonance between laser and REM. The reflected radiation near this interval and the corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, certain part of the reflected field could be selectively amplified or depressed, leading to the selectively adjusting of the corresponding spectra.

Corona Virus Disease 2019 (COVID-19) has presented an unprecedented challenge to the health-care system across the world. The current study aims to identify the determinants of illness severity of COVID-19 based on ordinal responses. A retrospective cohort of COVID-19 patients from four hospitals in three provinces in China was established, and 598 patients were included from 1 January to 8 March 2020, and divided into moderate, severe and critical illness group. Relative variables were retrieved from electronic medical records. The univariate and multivariate ordinal logistic regression models were fitted to identify the independent predictors of illness severity. The cohort included 400 (66.89%) moderate cases, 85 (14.21%) severe and 113 (18.90%) critical cases, of whom 79 died during hospitalisation as of 28 April. Patients in the age group of 70+ years (OR = 3.419, 95% CI: 1.596–7.323), age of 40–69 years (OR = 1.586, 95% CI: 0.824–3.053), hypertension (OR = 3.372, 95% CI: 2.185–5.202), ALT >50 μ/l (OR = 3.304, 95% CI: 2.107–5.180), cTnI >0.04 ng/ml (OR = 7.464, 95% CI: 4.292–12.980), myohaemoglobin>48.8 ng/ml (OR = 2.214, 95% CI: 1.42–3.453) had greater risk of developing worse severity of illness. The interval between illness onset and diagnosis (OR = 1.056, 95% CI: 1.012–1.101) and interval between illness onset and admission (OR = 1.048, 95% CI: 1.009–1.087) were independent significant predictors of illness severity. Patients of critical illness suffered from inferior survival, as compared with patients in the severe group (HR = 14.309, 95% CI: 5.585–36.659) and in the moderate group (HR = 41.021, 95% CI: 17.588–95.678). Our findings highlight that the identified determinants may help to predict the risk of developing more severe illness among COVID-19 patients and contribute to optimising arrangement of health resources.

Dolostones are widely developed in the middle Permian rocks of East Yunnan, China, mainly in the shoal-facies Maokou Formation. The previously reported dolostone formation mechanisms cannot explain the distribution and geochemical characteristics of these dolostones, in particular their strontium, magnesium and oxygen isotope signatures. To help predict the distribution of dolostone reservoirs and reduce the exploration risk and cost, this study proposes a new model of dolomitization: open thermal convection dolomitization. In this new dolomitization model, Mg2+ in dolomitizing fluids originates mostly from seawater, with a minor component coming from deep hydrothermal fluids. Elevated heat flux (in this case due to the nearby Emei mantle plume) causes spatial temperature variations in the fluid along the circulation flow pathways, resulting in fast and pervasive dolomitization of limestone. The proposed model not only explains the characteristics and distribution of dolostones in the study area but also serves as a reference for predicting the distribution of dolostones in other areas subjected to thermal convection.

The present study examines the characteristics of clay minerals in shale gas reservoirs and their influence on reservoir properties based on X-ray diffraction and scanning electron microscopy. These analyses were combined with optical microscopy observations and core and well-log data to investigate the genesis, distribution characteristics, main controlling factors and pore features of clay minerals of the Lower Silurian Longmaxi Formation in the East Sichuan area, China. The clay mineral assemblage consists of illite + mixed-layer illite-smectite (I-S) + chlorite. This assemblage includes three sources of clay minerals: detrital, authigenic and diagenetic minerals. The lower section of the Longmaxi Formation in the Jiaoshiba area has sealing ability which resulted in abnormal high pressures during hydrocarbon generation which inhibited illitization. Therefore, an anomalous transformation sequence is present in which the mixed-layer I-S content increases with depth. This anomalous transformation sequence can be used to infer the existence of abnormal high pressures. The detrital components of the formation also affect the clay-minerals content indirectly, especially the abundance of K-feldspar. The transformation of mixed-layer I-S to illite is limited due to the limited availability of K+, which determines the extent of transformation. Three types of pores were observed in the shale reservoir rocks of the Longmaxi Formation: interparticle (interP) pores, intraparticle (intraP) pores and organic-matter pores. The clay-mineral content controls the development of intraP pores, which are dominated by pores within clay particles. For a given clay mineral content, smectite and mixed-layer I-S were more conducive to the development of shale-gas reservoirs than other clay minerals.

The sea cucumber Apostichopus japonicus is a deposit-feeder and vital for marine benthic ecosystems. Hypoxia can influence the behaviour and even lead to massive mortality in A. japonicus in the wild. It is important to understand the molecular responses of A. japonicus when exposed to acute changes in dissolved oxygen (DO) concentration. In this study, RNA-seq provided a general overview of the gene expression profiles of the respiratory tree of A. japonicus exposed to DO of 8 mg l−1 (DO8), 4 mg l−1 (DO4) and 2 mg l−1 (DO2) conditions. Differentially expressed genes (DEGs) screening with the NOISeq method identified 51, 59 and 61 DEGs according to the criteria of fold change ≥2 and divergence probability ≥0.8 in the comparisons of DO2 vs DO4, DO2 vs DO8 and DO4 vs DO8, respectively. Gene ontology analysis showed that ‘cellular process’ and ‘binding’ had the most enriched DEGs in the categories of ‘biological process’ and ‘molecular function’, respectively (catalytic activity also had the most enriched DEGs in the category of ‘molecular function’ based on the comparison of DO2 vs DO8), while ‘cell’ and ‘cell part’ had the most enriched DEGs in the category of ‘cellular component’. The DEGs were mapped to 79, 81 and 104 pathways in the KEGG database, and 8, 29 and 16 pathways were significantly enriched, respectively. The DO-specific DEGs identified in this study of the respiratory tree are important targets for further research into the biochemical mechanisms involved in the response of the sea cucumber to changes in the DO concentration.

An alloy with the composition of Mg–3.7Zn–0.3Y–0.3Gd (in at.%) which contains quasicrystal phase was studied by multiple means. The as-cast alloy has dendritic structure and consists of α-Mg, I-phase, W-phase, and Mg–Zn precipitations. The alloy was forged one pass and annealed at 440 °C for 4 h, then followed by two passes of compressions. Eutectics were crushed and partially dissolved after deformation and annealing. The tensile strength increased after each forge pass. Submicron scale particles precipitated all around the grains during the deformations, and the amount of precipitations was proportional to the amount of deformations. These precipitated particles were observed by high resolution transmission electron microscopy (TEM). The existence of rhomboid W'-phase with face center cubic (FCC) structure and globular I-phase was confirmed. A quasi-periodicity lamellar phase combined with I-phase was founded, which was considered to be the transient phase between I-phase and W'-phase. This phase had orientation relationship with $\left( {1\bar 101} \right)$ of α-Mg basis and one of the 5-fold planar of the I-phase.

Our aim is to screen miRNAs and genes related to tetralogy of Fallot and construct a co-expression network based on integrating miRNA and gene microarrays. We downloaded the gene expression profile GSE35490 (miRNA) and GSE35776 (mRNA) of tetralogy of Fallot from the Gene Expression Omnibus database, which includes eight normal and 15 disease samples from infants, and screened differentially expressed miRNAs and genes between normal and disease samples (cut-off: p < 0.05; FDR < 0.05; and log FC > 2 or log FC < −2); in addition, we downloaded human miRNA and their targets, which were collected in the miRNA targets prediction database TargetScan, and selected ones that also appeared in our differentially expressed miRNAs and their predicted targets (score >0.9) and then made a relationship of diff_miRNAs and diff_genes of our results. Finally, we uploaded all the diff_target genes into String, constructed a co-expression network regulated by diff_miRNAs, and performed functional analysis with the software DAVID. Comparing normal and disease lesion tissue, we got 32 and 875 differentially expressed miRNAs and genes, respectively, and found hsa-miR-124 with 34 diff_target genes and hsa-miR-138 with two diff_target genes. Then we constructed a co-expression network that contains 231 pairs of genes. Genes in the network were enriched into 14 function clusters, and the most significant one is protein localisation. We screened the tetralogy of Fallot-related hsa-miR-124 and hsa-miR-138 with their direct and indirect differentially expressed target genes, and found that protein localisation is the significant cause affecting tetralogy of Fallot. Our approach may provide the groundwork for a new therapy approach to treating tetralogy of Fallot.

Using the INRA – University of Minnesota porcine 7000 Rad Radiation Hybrid panel (IMpRH) containing 118 clones, porcine cellular retinol binding protein gene 1 (RBP1) and plasma retinol binding protein gene 4 (RBP4) were assigned to porcine chromosomes 13 and 14, respectively. The mRNA distributions of the two genes in adult Wuzhishan pig tissues (lung, skeletal muscle, spleen, heart, stomach, large intestine, lymph node, small intestine, liver, brain, kidney and fat) were examined. One single nucleotide polymorphism (SNP) was identified in Laiwu, Wuzhishan, Guizhou, Bama pig breeds and a Tongcheng experimental population and analysed using a polymerase chain reaction–restriction fragment length polymorphism (PCR–RFLP) method. Significant associations were found between different genotypes of A/G156 and maximum carcass length (LM), minimum carcass length (LN), haemoglobin (HGB), mean corpuscular volume haemoglobin (MCH), and day to slaughter weight (age) traits in the Tongcheng experimental population. This SNP locus might be used as a genetic marker in pig breeding and production.

Transient laser-induced anomalous photovoltaic effect hasbeen studied in La0.8Sr0.2MnO3 films grown on theSrTiO3 (001) substrates by laser molecular beam epitaxy. It isdemonstrated that the signal polarity is reversed when the films areirradiated through the substrate rather than at the air/filminterface. The microstructures in these films are clarified in termsof the oriented microdomains with their (101) plane parallel to thesubstrate surface, suggesting off-diagonal Seebeck effect plays animportant role for our observation. From the results, we obtain theanisotropy of the thermoelectric power $\Delta S=S_{ab}-S_{c}=0.3~\mu$ V/K, where S ab and S c are the ab-plane and c-axis Seebeck coefficients.

Recently, it was demonstrated that grain refinement in metals can take place through two mechanisms, namely, dynamic nucleation and remelting of initially formed dendrites. In this study, it was found that Ni99.45B0.55 undergoes grain refinement, both by dynamic nucleation or by remelting, depending on the initial bulk undercooling just before crystallization. The nature of the grain refinement process is confirmed by microstructural analysis of the undercooled specimens.