Rumination has been shown to play a part in post-traumatic stress disorder (PTSD), but its relation to the intrusions characteristic of PTSD has mainly been investigated experimentally. This proof-of-concept case study explored the occurrence, personal experiences, and possible relation between rumination and intrusions in two PTSD patients in their daily living using a mixed method approach. A novel wearable self-tracking instrument was employed which provided fine-grained temporal resolution of observation data and could eliminate recall bias. Furthermore, quantitative and qualitative data were collected on participants’ symptoms, rumination and experiences of using the self-tracking instrument. First, without distinguishing between the two phenomena, the participants tracked both for a week. After receiving psychoeducational training for distinguishing between rumination and intrusions, the differentiated phenomena were tracked for a week. Both participants reported being subjectively able to distinguish between rumination and intrusions and made observations with high adherence during the project. Data hinted at a possible temporal relation between the phenomena in line with theories posing rumination as a maladaptive coping strategy as well as an exacerbator of PTSD symptoms. However, relations to mood were inconclusive. Furthermore, by using the self-tracking instrument, participants gained a heightened awareness of the characteristics of rumination and intrusions and contextual cues for occurrence, as well as a greater sense of momentary agency. Results reveal promising prospects in using the wearable self-tracking instrument for further investigation of the relation between rumination and intrusions in the lived lives of PTSD patients, as well as potential for incorporating this method in clinical treatment.

Seasonal affective disorder (SAD) is characterised by recurrent episodes in autumn and winter of depression, hypersomnia, augmented appetite with carbohydrate craving, and weight gain, and can be successfully treated with bright light. Circadian rhythm hypotheses (summarized in) have stimulated research into the pathophysiology of SAD, postulating that:

1. 1.The illness is a consequence of delayed phase position,

2. 2.It is correlated with diminished circadian amplitude, or

3. 3.It results from changes in the nocturnal duration between dusk and dawn e.g. of low core body temperature or melatonin secretion. Light is considered to act directly on the circadian pacemaker (‘Process C’) and not on sleep dependent processes (‘Process S’). Thus successful treatment of SAD must act via mechanisms within known retinohypothalamic pathways. Conversely, emergence of SAD symptoms may reflect inappropriate neurobiological response to decreasing daylength.

This study was designed to evaluate the effects of algal and yeast β-glucans on the porcine gastrointestinal microbiota, specifically the community of Lactobacillus, Bifidobacterium and coliforms. A total of 48 pigs were fed four diets over a 28-day period to determine the effect that each had on these communities. The control diet consisted of wheat and soya bean meal. The remaining three diets contained wheat and soya bean meal supplemented with β-glucan at 250 g/tonne from Laminaria digitata, Laminaria hyperborea or Saccharomyces cerevisiae. Faecal samples were collected from animals before feeding each diet and after the feeding period. The animals were slaughtered the following day and samples were collected from the stomach, ileum, caecum, proximal colon and distal colon. Alterations in Lactobacillus in the gastrointestinal tract (GIT) were analysed using denaturing gradient gel electrophoresis (DGGE) profiles generated by group-specific 16S rRNA gene PCR amplicons. Plate count analysis was also performed to quantify total coliforms. DGGE profiles indicated that all β-glucan diets provoked the emergence of a richer community of Lactobacillus. The richest community of lactobacilli emerged after feeding L. digitata (LD β-glucan). Plate count analysis revealed that the L. hyperborea (LH β-glucan) diet had a statistically significant effect on the coliform counts in the proximal colon in comparison with the control diet. β-glucan from L. digitata and S. cerevisiae also generally reduced coliforms but to a lesser extent. Nevertheless, the β-glucan diets did not significantly reduce levels of Lactobacillus or Bifidobacterium. DGGE analysis of GIT samples indicated that the three β-glucan diets generally promoted the establishment of a more varied range of Lactobacillus species in the caecum, proximal and distal colon. The LH β-glucan had the most profound reducing effect on coliform counts when compared with the control diet and diets supplemented with L. digitata and S. cerevisiae β-glucans.

OH(1720 MHz) and methanol masers are now recognized to be excellent probes of the interactions of supernova remnants with molecular clouds and tracers of massive star formation, respectively. To better understand the nature of star formation activity in the central region of the Galaxy, we have used these two classes of masers combined with the IRAC and MIPS data to study prominent sites of ongoing star formation in the nuclear disk. The nuclear disk is characterized by massive GMCs with elevated gas temperatures, compared to their dust temperatures. We note an association between methanol masers and a class of mid-infrared “green sources”. These highly embedded YSOs show enhanced 4.5μm emission due to excited molecular lines.

The distribution of methanol masers and supernova remnants suggest a low efficiency of star formation (with the exception of Sgr B2), which we believe is due to an enhanced flux of cosmic ray electrons impacting molecular clouds in the nuclear disk. We also highlight the importance of cosmic rays in their ability to heat molecular clouds, and thus increase the gas temperature.

Recent experimental studies of electrical conduction in a specially prepared silver-based material, across which a spark has been passed, are interpreted through electrical conduction via charge density waves (CDWs) moving in a dc electric field along quasi-one-dimensional chains of Ag+-ions inside the branches of the discharge pattern engraved in the material by the spark. Here we present experimental evidence that the resistance along a number N of branches connected in parallel increases in quantized steps of height $h/2e^{2}N$ with increasing voltage applied across the branches

A comprehensive approach is presented to optimise coking coalblends. It includes a first calculation of CRI and CSR for the set ofcoals, confirmed by laboratory carbonisation tests and later completedby carbonisation tests at pilot scale. This approach is expectedto afford a helpful instrument for the coke plant operator.

Cathode-directed sparks engrave in a specially prepared, originally low-conducting nonlinear silver-based material beyond a critical electric power input highly structured discharge patterns which exhibit an anomalous potential distribution consisting of an electrical double layer in series with a region of high electrical conductivity.

The diffusion behavior of elements constituting Hastelloy C-276 (C, Si, Mn, Co, W, Fe, Cr, Mo, and Ni) in alumina films was investigated using secondary ion mass spectroscopy. The films were deposited by ion-beam-assisted deposition and annealed in vacuum over a temperature range of 500–1000 °C. Characterization of film microstructure was performed using transmission electron microscopy and selected area diffraction analyses. The films were predominantly amorphous with alumina nanocrystallites nonuniformly dispersed throughout the volume both before and after annealing. A relatively wide interface region between the Hastelloy substrate and alumina film was formed in the as-deposited sample due to ion beam mixing. No diffusion of any of the substrate elements was observed after annealing, except for Mn, Cr, and Ni. The impurity depth distributions consisted of two components, which differed by several orders of magnitude with respect to diffusion coefficient and solubility. Activation energies and temperature dependencies of the diffusion coefficients were determined, and a diffusion mechanism was discussed.

A single LaMnO3 buffer layer was developed for the growth of superconducting thick YBa2Cu3O7−δ (YBCO) films on polycrystalline Ni-alloy substrates where a biaxially textured MgO layer, produced by ion-beam assisted deposition (IBAD), was used as a template. Using pulsed laser deposition, a 1.65-μm-thick YBCO film with a critical current density of 1.4 × 106 A/cm2 in self field at 75 K was achieved on sputtered LaMnO3-buffered IBAD MgO substrates. This corresponds to a critical current (Ic) of 231 A/cm-width. This result demonstrates the possibility of using both LaMnO3 buffer and IBAD MgO template for producing high current density YBCO-coated conductors.

Nickel-based superalloys have been coated with magnesium oxide (MgO) using ion-beam-assisted deposition (IBAD). This technique produced a well-oriented bi-axially textured MgO template layer with a Ф scan full width half maximum of 6.4°. The layer architecture for these samples was as follows: polished hastelloy C276/amorphous Si3N4/IBAD MgO/ pulsed laser deposited (PLD) Y2O3–ZrO2/PLD CeO2/PLD YBa2Cu3O7?δ. The subsequent heteroepitaxial PLD of 1.5-mm-thick YBCO showed a nominal critical current density of over 1 MA/cm2 (75 K, self-field) along a microbridge and had an in-plane mosaic spread of 4.8° and an out-of-plane spread of 1.3°. These results compare well with our earlier work using IBAD yttria-stabilized zirconia (YSZ) as a template layer and indicate that IBAD MgO is a suitable substitute. Furthermore, these results suggest that IBAD MgO could be adapted to and increase the feasibility of a continuous process to fabricate longer lengths of coated conductors at speeds 100 times faster than that previously realized with IBAD YSZ.

We have used a low temperature magnetic imaging system to determine current pathways in 5 cm long “good” and “bad” regions of a 1-cm-wide YBa2Cu3O7-δ coated conductor. The good and bad regions were identified with 4 point probe measurements taken at 1 cm intervals along the tape length. The current density map from the good region showed the expected edge peaked structure, similar to that seen in previous work on high quality test samples grown on single crystal substrates. The structure was also consistent with theoretical understanding of thin film superconductors where demagnetizing effects are strong. The maps from the bad region showed that the current was primarily confined to the right half of the sample. The left half carried only a small current that reached saturation quickly. Effectively halving the sample width quantitatively explains the critical current measured in that section. Spatially resolved x-ray analysis with 1 mm resolution was used to further characterize the bad section and suggested an abnormally large amount of a-axis YBCO present. This may be the result of non-uniform heating leading to a low deposition temperature in that area.

Each process used to deposit or make the bi-axially textured template, buffer layer(s), and the superconductor in a coated conductor creates interfaces along which defects or interfacial reactions may result. These defects can be additive and propagate through the entire film structure to affect the growth and properties of the superconducting film. Defects within the films and their corresponding transport properties have been correlated with the differences in the thickness of the underlying buffer layer material. This knowledge can be used to control and engineer the structure of the coated conductor to maximize critical current densities.

The microstructural development of YBa2Cu3Oy (Y-123) coated conductors based on the ion-beam-assisted deposition (IBAD) of yttria-stabilized zirconia (YSZ) to produce a biaxially textured template is presented. The architecture of the conductors was Y-123/CeO2/IBAD YSZ/Inconel 625. A continuous and passivating Cr2O3 layer forms between the YSZ layer and the Inconel substrate. CeO2 and Y-123 are closely lattice-matched, and misfit strain is accommodated at the YSZ/CeO2 interface. Localized reactions between the Y-123 film and the CeO2 buffer layer result in the formation of BaCeO3, YCuO2, and CuO. The positive volume change that occurs from the interfacial reaction may act as a kinetic barrier that limits the extent of the reaction. Excess copper and yttrium generated by the interfacial reaction appear to diffuse along grain boundaries and intercalate into Y-123 grains as single layers of the Y-247, Y-248, or Y-224 phases. The interfacial reactions do not preclude the attainment of high critical currents (Ic) and current densities (Jc) in these films nor do they affect to any appreciable extent the nucleation and alignment of the Y-123 film.

In 1998, the European Community, the Region Wallonne, and the Province du Hainaut funded the project known as the Centre for the control of animal health and its management (CESAM). This project was initiated in the Hainaut province of Belgium to answer problems encountered by cattle producers. Its overall goal is the identification of stages in the entire bovine production process where economic efficiency can be increased. A part of this project aims principally at the study of the impact of health-related problems on dairy production. For this part of the project, 32 veterinarians and 51 farmers started collecting data in the field. The methodology for data collection was based mainly on the harmony between the farmer and the veterinarian. Therefore, several procedures were implemented to ensure adequate motivation of both farmers and veterinarians. Farmers note all events of their livestock using a list, which contains disease events, preventive treatments, reasons for culling, and management practices. A veterinarian visits farms monthly to validate collected data and to discuss specific problems. During these farm visits, veterinarians collect body condition scores on adult cows. Veterinarians record also information on health problems they encounter during their normal practice using an international health data recording nomenclature. A national organization provides unique animal identification system. Production data will be recorded and feeding practices, milking procedures and barn comfort indices will be regularly investigated. All data will be collected on pre-printed documents, scanned at CESAM and centralized in a relational computer database. Criteria to evaluate the quality of the proposed methodology are presented.