As avionics systems become increasingly complex, traditional fault prediction methods are no longer sufficient to meet modern demands. This paper introduces four advanced fault prediction methods for avionics components, utilising a multi-step prediction strategy combined with a stacking regressor. By selecting various standard regression models as base regressors, these base regressors are first trained on the original data, and their predictions are subsequently used as input features for training a meta-regressor. Additionally, the Tree-structured Parzen Estimator (TPE) algorithm is employed for hyperparameter optimisation. The experimental results demonstrate that the proposed stacking regression methods exhibit superior accuracy in fault prediction compared to traditional single-model approaches.

Interlaminar delamination damage is a common and typical defect in the context of structural damage in carbon fiber-reinforced resin matrix composites. The technology to identify such damage is crucial for improving the safety and reliability of structures. In this paper, we fabricated carbon fiber-reinforced composite laminates with different degrees of delamination damage, conducted static load experiments on them and used femtosecond fiber Bragg grating sensors (fsFBG) to determine their structural state to investigate the effects of delamination damage on their performance. We constructed a model to identify damage based on the deep residual shrinkage network, and used experimental data to enable it to identify varying degrees of delamination damage to carbon fiber-reinforced composites with an accuracy of 97.98%.

The objective of this study was to investigate the effects of different cockpit primary flight display (PFD) interface designs on pilot cognitive efficiency and cognitive load. This study designed five optimised PFD interfaces and conducted interface cognition experiments to assess cognitive responses across six different PFD interface designs, including the original design. It compared various subjective and objective metrics across different interface designs and evaluated the impact of each design factor on cognitive task performance. The experimental results show that the PFD interface in the original interface design performs better under different flight symbol designs, and the interface with 50% increase in font size performs better among interface designs with different font sizes with relatively lower cognitive load. This study provides experimental support and optimization suggestions for the optimal design of cockpit PFD interface, which can help improve pilots’ perception and operational capabilities, and thus enhance task performance efficiency and flight safety. Future research can investigate the effects of various design factors on the cognitive effects of the interface to enhance the ongoing improvement and optimisation of interface design.

This contribution focuses on the abatement with hydrogen of CO2 and non-CO2 emissions. It is agenda-setting in two respects. Firstly, it challenges the globally accepted hydrocarbon sustainable aviation fuel (SAF) pathway to sustainability and recommends that our industry accelerates along the hydrogen pathway to ‘green’ aviation. Secondly, it reports a philosophical and analytical investigation of appropriate accuracy on abatement strategies for nitrogen oxides and contrails of large hydrogen airliners. For the second contribution, a comparison is made of nitrogen oxide emissions and contrail avoidance options of two hydrogen airliners and a conventional airliner of similar passenger capacity. The hydrogen aircraft are representative of the first and second innovation waves where the main difference is the weight of the hydrogen tanks. Flights of 1000, 2000, 4000 and 8000 nautical miles are explored. Cranfield’s state of the art simulators for propulsion system integration and gas turbine performance (Orion and Turbomatch) were used for this. There are two primary contributions to knowledge. The first is a new set of questions to be asked of SAF and hydrogen decarbonising features. The second is the quantification of the benefits from hydrogen on non-CO2 emissions. For the second generation of long-range hydrogen-fuelled aircraft having gas turbine propulsion, lighter tanks (needing less thrust and lower gas temperatures) are anticipated to reduce NOx emissions by over 20%; in the case of contrails, the preliminary findings indicate that regardless of the fuel, contrails could largely be avoided with fuel-burn penalties of a few per cent. Mitigating action is only needed for a small fraction of flights. For conventional aircraft this penalty results in more CO2, while for hydrogen aircraft the additional emission is water vapour. The conclusion is that our research community should continue to consider hydrogen as the key ‘greening’ option for aviation, notwithstanding the very significant costs of transition.

In this paper, we investigate the attitude manoeuver planning and tracking control of the flexible satellite equipped with a coilable mast. Due to its flexible beamlike structure, the coilable mast experiences bending and torsional modal vibrations in multi-direction. The complex nonlinear coupling and other external disturbances significantly impact the achievement of high-precision attitude control. To overcome these challenges, a robust attitude tracking controller is proposed for easy implementation by the Attitude Determination and Control System (ADCS). The controller consists of a disturbance compensator, feedforward controller and output feedback controller. The compensator, based on a Nonlinear Disturbance Observer (NDO), effectively compensates for the cluster disturbances caused by vibrations, environmental factors and parameter perturbations. The feedforward controller tracks the desired path in the nominal satellite model. Furthermore, the output feedback controller enables large-angle manoeuver control of the satellite and evaluates the suppression effect of the controlled output on the observation error of cluster disturbances used the ${L_2}$-gain. Simulation results demonstrate that the proposed controller successfully achieves high-precision attitude tracking control during large-angle manoeuvering.

The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration (LDPA) and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers used as the driving sources. The successful use of the SG-II Peta-watt (SG-II PW) laser facility for LDPA and its applications in radiographic diagnoses have been manifested by the good performance of the SG-II PW facility. Recently, the SG-II PW laser facility has undergone extensive maintenance and a comprehensive technical upgrade in terms of the seed source, laser contrast and terminal focus. LDPA experiments were performed using the maintained SG-II PW laser beam, and the highest cutoff energy of the proton beam was obviously increased. Accordingly, a double-film target structure was used, and the maximum cutoff energy of the proton beam was up to 70 MeV. These results demonstrate that the comprehensive performance of the SG-II PW laser facility was improved significantly.

Paravulvus zhongshanensis sp. nov., isolated from soil in a location at Jiangsu Province, China, is described and illustrated based on morphological, morphometric and molecular characterizations. The new species is characterized by its body 1.17–1.53 mm long, lip region offset by marked constriction and 12.1–13.8 μm broad, mural tooth deltoid and 9.6–11.7 μm long, neck 278–360 μm long, pharyngeal expansion 164–208 μm long or occupying more than one-half (54–62%) of total neck length, uterus 32.5–35.3 μm long or 1.0–1.1 times the corresponding body diameter, V = 47.8–53.4, paravulvae absent, female tail subcylindrical conoid (30.5–39.5 μm, c = 36.0–45.5, c′ = 1.7–2.2) with widely rounded end, and male unknown. The new species was compared with six known species of the genus including Paravulvus acuticaudatus, Paravulvus confusus, Paravulvus hartingii, Paravulvus iranicus, Paravulvus loofi and Paravulvus microdontus mainly by similarities in having conical tail and c′ value larger than 1.3. The rRNA and mitochondrial cytochrome oxidase subunit 1 genes of the new species were obtained and were used for reconstructing the phylogenetic relationships of the new species.

For a hypersonic-speed aircraft with a flat fuselage structure that has narrow space for a traditional wheel-type landing gear retraction, a novel type of wheel-ski landing gear is designed, which is different from traditional landing gears in force distribution and actuation methods. In order to capture the direction control performance of an aircraft with the wheel-ski landing gear, the aircraft ground taxiing nonlinear dynamic mathematical model is built based on a certain type of aircraft data. The experiment of the wheel-ski landing gear actuator and the differential brake control system is carried out to verify that the electric wheel-ski actuator model with the pressure sensor is in good agreement with the test results, indicating the model validity and the speediness of the differential brake response. Then a new fuzzy combined direction rectifying control law is designed based on the optimisation method and the fuzzy control theory. Comparing with the PD wheel-ski differential brake control, the direction rectifying efficiencies increase higher than 140% during the whole taxiing process. In addition, the combined control law can also decrease the overshoots of the yaw angle responses effectively. Finally, the stability and robustness of the designed combined direction control law are verified under various working conditions.

This paper studied the use of eye movement data to form criteria for judging whether pilots perceive emergency information such as cockpit warnings. In the experiment, 12 subjects randomly encountered different warning information while flying a simulated helicopter, and their eye movement data were collected synchronously. Firstly, the importance of the eye movement features was calculated by ANOVA (analysis of variance). According to the sorting of the importance and the Euclidean distance of each eye movement feature, the warning information samples with different eye movement features were obtained. Secondly, the residual shrinkage network modules were added to CNN (convolutional neural network) to construct a DRSN (deep residual shrinkage networks) model. Finally, the processed warning information samples were used to train and test the DRSN model. In order to verify the superiority of this method, the DRSN model was compared with three machine learning models, namely SVM (support vector machine), RF (radom forest) and BPNN (backpropagation neural network). Among the four models, the DRSN model performed the best. When all eye movement features were selected, this model detected pilot perception of warning information with an average accuracy of 90.4%, of which the highest detection accuracy reached 96.4%. Experiments showed that the DRSN model had advantages in detecting pilot perception of warning information.

As a basic flow model for engineering applications, wall-bounded turbulent flow has been widely studied in the field of aero-optics, but the flow control methods that could effectively suppress aero-optical effects are relatively rare. As an urgent requirement in engineering application, the concept of the steady wall blowing and suction is proposed by the author. Firstly, the author briefly described the flow model and physical method. Secondly, the choice of disturbance type is given. Then, the results of wall blowing-suction, suction and blowing ways based on steady and unsteady disturbance are compared. Finally, it is concluded that employing the high steady wall blowing disturbance (A = 0.2) could realise aero-optical suppression by around 20%. Besides, the steady wall suction scheme contributes to about 70%–80% reduction effect within a wide amplitude range (A = 0.2–1.0), which suppresses this effect by maintaining laminar state downstream contrasted by the baseline case.

We report the experimental results of the commissioning phase in the 10 PW laser beamline of the Shanghai Superintense Ultrafast Laser Facility (SULF). The peak power reaches 2.4 PW on target without the last amplifying during the experiment. The laser energy of 72 ± 9 J is directed to a focal spot of approximately 6 μm diameter (full width at half maximum) in 30 fs pulse duration, yielding a focused peak intensity around 2.0 × 1021 W/cm2. The first laser-proton acceleration experiment is performed using plain copper and plastic targets. High-energy proton beams with maximum cut-off energy up to 62.5 MeV are achieved using copper foils at the optimum target thickness of 4 μm via target normal sheath acceleration. For plastic targets of tens of nanometers thick, the proton cut-off energy is approximately 20 MeV, showing ring-like or filamented density distributions. These experimental results reflect the capabilities of the SULF-10 PW beamline, for example, both ultrahigh intensity and relatively good beam contrast. Further optimization for these key parameters is underway, where peak laser intensities of 1022–1023 W/cm2 are anticipated to support various experiments on extreme field physics.