Magnetic grain-size variations have been used as sensitive paleoclimate proxies to investigate the evolution of the East Asian summer monsoon, but their relationship with temperature and precipitation is not entirely clear. Here we find that two magnetic grain-size proxy records (χARM/χLF and χARM/SIRM, where χARM, χLF and SIRM are anhysteretic remanent magnetization susceptibility, magnetic susceptibility measured at 470 Hz and saturation isothermal remanent magnetization, respectively) of Chinese loess and red-clay sediments co-vary during the last 6 Ma, except between ~ 4.5 and 2.6 Ma, when these two records had opposite trends. We attribute this disparate behavior to the different responses of χARM/χLF and χARM/SIRM to temperature and precipitation during ~ 4.5–2.6 Ma, when temperature and precipitation on the Chinese Loess Plateau were decoupled. A comparison of the loess and red-clay χARM/χLF and χARM/SIRM records with the global ice-volume proxy records reveals that χARM/χLF is more sensitive to temperature variations than χARM/SIRM. The results suggest that temperature on the Chinese Loess Plateau had a cooling trend from ~ 4.5 to ~ 2.6 Ma, whereas rainfall tended to increase. Our studies demonstrate that joint analysis of loess χARM/χLF and χARM/SIRM records can reveal paleoclimatic information that cannot be revealed by a single parameter.

A high-resolution rock magnetic investigation was performed on the Chaona Quaternary loess/paleosol sequences in the Central Chinese Loess Plateau. Based on a newly developed independent unturned time scale and magnetic records, we reconstructed the history of the East Asia monsoons during the last 3 Ma and explored the middle Pleistocene climate transition (MPT). Rock magnetic results show that the loess layers are characterized by relatively high coercivity and remanent coercivity, lower magnetic susceptibility (MS), and that the paleosol layers are characterized by relatively high MS, saturation magnetization and remanent saturation magnetization. Spectrum analyses indicate that there are various periods in addition to orbital periodicities. According to the onset and stable appearance of 100 kyr period, we consider that the MPT recorded in this section began at ~ 1.26 Ma and was completed by ~ 0.53 Ma, which differs from previous investigations based on orbitally tuned time scales. The forcing mechanism for the MPT was more complicated than just the orbital forcing. We conclude that the rapid uplift of the Tibetan Plateau may have played an important role in the shift of periodicities during the middle Pleistocene.

We analyzed birth order differences in means and variances of height and body mass index (BMI) in monozygotic (MZ) and dizygotic (DZ) twins from infancy to old age. The data were derived from the international CODATwins database. The total number of height and BMI measures from 0.5 to 79.5 years of age was 397,466. As expected, first-born twins had greater birth weight than second-born twins. With respect to height, first-born twins were slightly taller than second-born twins in childhood. After adjusting the results for birth weight, the birth order differences decreased and were no longer statistically significant. First-born twins had greater BMI than the second-born twins over childhood and adolescence. After adjusting the results for birth weight, birth order was still associated with BMI until 12 years of age. No interaction effect between birth order and zygosity was found. Only limited evidence was found that birth order influenced variances of height or BMI. The results were similar among boys and girls and also in MZ and DZ twins. Overall, the differences in height and BMI between first- and second-born twins were modest even in early childhood, while adjustment for birth weight reduced the birth order differences but did not remove them for BMI.

A trend toward greater body size in dizygotic (DZ) than in monozygotic (MZ) twins has been suggested by some but not all studies, and this difference may also vary by age. We analyzed zygosity differences in mean values and variances of height and body mass index (BMI) among male and female twins from infancy to old age. Data were derived from an international database of 54 twin cohorts participating in the COllaborative project of Development of Anthropometrical measures in Twins (CODATwins), and included 842,951 height and BMI measurements from twins aged 1 to 102 years. The results showed that DZ twins were consistently taller than MZ twins, with differences of up to 2.0 cm in childhood and adolescence and up to 0.9 cm in adulthood. Similarly, a greater mean BMI of up to 0.3 kg/m2 in childhood and adolescence and up to 0.2 kg/m2 in adulthood was observed in DZ twins, although the pattern was less consistent. DZ twins presented up to 1.7% greater height and 1.9% greater BMI than MZ twins; these percentage differences were largest in middle and late childhood and decreased with age in both sexes. The variance of height was similar in MZ and DZ twins at most ages. In contrast, the variance of BMI was significantly higher in DZ than in MZ twins, particularly in childhood. In conclusion, DZ twins were generally taller and had greater BMI than MZ twins, but the differences decreased with age in both sexes.

For over 100 years, the genetics of human anthropometric traits has attracted scientific interest. In particular, height and body mass index (BMI, calculated as kg/m2) have been under intensive genetic research. However, it is still largely unknown whether and how heritability estimates vary between human populations. Opportunities to address this question have increased recently because of the establishment of many new twin cohorts and the increasing accumulation of data in established twin cohorts. We started a new research project to analyze systematically (1) the variation of heritability estimates of height, BMI and their trajectories over the life course between birth cohorts, ethnicities and countries, and (2) to study the effects of birth-related factors, education and smoking on these anthropometric traits and whether these effects vary between twin cohorts. We identified 67 twin projects, including both monozygotic (MZ) and dizygotic (DZ) twins, using various sources. We asked for individual level data on height and weight including repeated measurements, birth related traits, background variables, education and smoking. By the end of 2014, 48 projects participated. Together, we have 893,458 height and weight measures (52% females) from 434,723 twin individuals, including 201,192 complete twin pairs (40% monozygotic, 40% same-sex dizygotic and 20% opposite-sex dizygotic) representing 22 countries. This project demonstrates that large-scale international twin studies are feasible and can promote the use of existing data for novel research purposes.

We address the issue of decreasing band-gap with increasing atomic number, inherent in semiconducting materials, by introducing a concept we call dimensional reduction. The concept leads to semiconductor compounds containing high atomic number elements and simultaneously exhibiting a large band gap and high mass density suggesting that dimensional reduction can be successfully employed in developing new γ-ray detecting materials. As an example we discuss the compound Cs2Hg6S7 that exhibits a band-gap of 1.65eV and mobility-lifetime products comparable to those of optimized Cd0.9Zn0.1Te.

The effect of layered-silicates on the mechanical response of intercalated polycarbonate (PC) nanocomposites subjected to quasi-static tensile, compressive and ballistic impact testing conditions has been investigated. These nanocomposites were melt-processed, in which good dispersion of nanoclays and adequate adhesive bonding between the nanoclay and PC matrix are achieved. However, their ductility upon tensile loading is significantly affected; a transition from ductile to brittle deformation occurs at clay loading of about 3 wt.%. Stress whitening is evident in the tensile- and ballistic-tested 1.5, 2.5, and 3.5 wt.% clay nanocomposites, and is attributed to the light scattering by microvoids, which are presumably formed from either crazing of PC or debonding of the nanoclay tactoids upon mechanical deformation. The effect of clay loading on the ballistic impact strength of the monolithic PC nanocomposites and layered PC/PC-nano/PC composites is determined. Compressive yield strength measurements are obtained at strain rate of 0.001/s for the monolithic PC nanocomposites and are utilized to correlate with the ballistic impact strength of the layered PC/PC-nano/PC composites. Thermal degradation is noted in these PC nanocomposites, and its effect on the mechanical deformation is briefly discussed.

Motivated by the high level of strength and toughness of spider silk and its multifunctional nature, this paper reports on the engineering properties of individual fibers from Nephila Clavipes spider drag line under uniaxial tension, transverse compression and torsional deformation. The tensile properties were compared to the Argiope Aurentia spider silk and show different ultimate strength but similar traits of the unusual combination of strength and toughness characterized by a sigmoidal stress-strain curve. A high level of torsional stability is demonstrated. comparing favorably to other aramid fibers (including Kevlar fibers).

By monitoring the electrical resistivity of single phase polycrystalline Y1Ba2Cu3O7-δ samples while changing their oxygen content in both ozone and ordinary oxygen environments, we were able to investigate the correlation between their average oxygen content and the diffusion time for oxygen inside the grains. We model the resistivity time dependence as a two-step process and find that this explains our experimental results satisfactorily. From this model we are able to estimate a value of the oxygen diffusion coefficient from our data that agrees well with other measurements. We also conclude that while ozone and ordinary oxygen may have different effects in oxidizing the surface of grains, they show no observable differences in the oxygen diffusion process in the bulk Y1Ba2Cu3O7-δ material.