Hand, foot, and mouth disease (HFMD) shows spatiotemporal heterogeneity in China. A spatiotemporal filtering model was constructed and applied to HFMD data to explore the underlying spatiotemporal structure of the disease and determine the impact of different spatiotemporal weight matrices on the results. HFMD cases and covariate data in East China were collected between 2009 and 2015. The different spatiotemporal weight matrices formed by Rook, K-nearest neighbour (KNN; K = 1), distance, and second-order spatial weight matrices (SO-SWM) with first-order temporal weight matrices in contemporaneous and lagged forms were decomposed, and spatiotemporal filtering model was constructed by selecting eigenvectors according to MC and the AIC. We used MI, standard deviation of the regression coefficients, and five indices (AIC, BIC, DIC, R2, and MSE) to compare the spatiotemporal filtering model with a Bayesian spatiotemporal model. The eigenvectors effectively removed spatial correlation in the model residuals (Moran’s I < 0.2, p > 0.05). The Bayesian spatiotemporal model’s Rook weight matrix outperformed others. The spatiotemporal filtering model with SO-SWM was superior, as shown by lower AIC (92,029.60), BIC (92,681.20), and MSE (418,022.7) values, and higher R2 (0.56) value. All spatiotemporal contemporaneous structures outperformed the lagged structures. Additionally, eigenvector maps from the Rook and SO-SWM closely resembled incidence patterns of HFMD.

Sepiolite is considered a suitable substrate for Maya blue pigment. However, the interaction between sepiolite and indigo dye has not been fully understood. Previous studies have demonstrated that pre-treatment of sepiolite by heating or acid was useful in identifying the sepiolite–indigo interaction. The purpose of the present study was to prepare a series of hybrid sepiolite–indigo pigments after modifying the sepiolite using various alkali treatments (NaOH), then to evaluate their properties with respect to color, chemical resistance, and photostability. Samples were characterized using reflectance spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, Raman spectroscopy, transmission electron microscopy, and N2 adsorption-desorption. Under alkaline conditions, Si4+ and Mg2+ ions in sepiolite partially dissolved, disrupting the coordinated water associated with them. Mg2+ ions precipitated and blocked the structural channels of the sepiolite. The impact of the alkali treatment on the microporous structure and coordinated water of sepiolite significantly influenced the color properties and stability of the hybrid pigments. Proper alkaline treatment enhanced the greenish hue and chemical stability of the pigment, while severe treatments apparently compromised the structural integrity of the sepiolite, thus diminishing the quality of the hybrid pigment. Results from this study provide new insights into the color-causing and stabilizing mechanisms of sepiolite-based Maya blue pigment and also provide guidance for developing hybrid pigments based on clay minerals and organic dyes.

Accurate channel characterization is extremely helpful in channel estimation, channel coding, and many other parts of communication system design and can effectively reduce overhead. Ray tracing (RT) shows accurate channel reconstruction for specific maps, but the multipath propagation in indoor scenes is far more complex than in outdoor scenes leading to a challenge for RT. This work presents and validates an RT tool for a massive multiple-input multiple-output (MIMO) system in the millimeter-wave frequency bands with the associated channel beamforming algorithm and provides ideas for channel estimation algorithm in subsequent MIMO systems. The impact of the order of interactions, e.g. reflections and diffractions on the channel impulse response reconstruction are analyzed in the RT simulation. The comparison between RT simulated and measured results shows a reasonable level of agreement. The presented RT tool that can provide complete and accurate channel information is of high value for the design of reliable communication systems.

In this work, we confirm a Pr3+:LiYF4 pulsed laser with high power and high energy at 639 nm based on the acousto-optic cavity dumping technique. The maximum average output power, narrowest pulse width, highest pulse energy and peak power of the pulsed laser at a repetition rate of 0.1 kHz are 532 mW, 112 ns, 5.32 mJ and 47.5 kW, respectively. A 639 nm pulsed laser with such high pulse energy and peak power has not been reported previously. Furthermore, we obtain a widely tunable range of repetition rates from 0.1 to 5000 kHz. The diffracted beam quality factors M2 are 2.18 (in the x direction) and 2.04 (in the y direction). To the best of our knowledge, this is the first time that a cavity-dumped all-solid-state pulsed laser in the visible band has been reported. This work provides a promising method for obtaining high-performance pulsed lasers.

This paper studies changes of standard errors (SE) of the normal-distribution-based maximum likelihood estimates (MLE) for confirmatory factor models as model parameters vary. Using logical analysis, simplified formulas and numerical verification, monotonic relationships between SEs and factor loadings as well as unique variances are found. Conditions under which monotonic relationships do not exist are also identified. Such functional relationships allow researchers to better understand the problem when significant factor loading estimates are expected but not obtained, and vice versa. What will affect the likelihood for Heywood cases (negative unique variance estimates) is also explicit through these relationships. Empirical findings in the literature are discussed using the obtained results.

Time-domain characterization of ultrashort pulses is essential for studying interactions between light and matter. Here, we propose and demonstrate an all-optical pulse sampling technique based on reflected four-wave mixing with perturbation on a solid surface. In this method, a weak perturbation pulse perturbs the four-wave mixing signal generated by a strong fundamental pulse. The modulation signal of the four-wave mixing, which is detected in the reflection geometry to ensure a perfect phase-matching condition, directly reflects the temporal profile of the perturbation pulse. We successfully characterized multi-cycle and few-cycle pulses using this method. The reliability of our approach was verified by comparing it to the widely employed frequency-resolved optical gating method. This technique provides a simple and robust method for characterizing ultrashort laser pulses.

Introduction: Late-life depression (LLD) is associated with cognitive deficit with risk of future dementia. By examining the entropy of the spontaneous brain activity, we aimed to understand the neural mechanism pertaining to cognitive decline in LLD.

Methods: We collected MRI scans in older adults with LLD (n = 32), mild cognitive impairment [MCI (n = 25)] and normal cognitive function [NC, (n = 47)]. Multiscale entropy analysis (MSE) was applied to resting-state fMRI data. Under the scale factor (tau) 1 and 2, reliable separation of fMRI data and noise was achieved. We calculated the brain entropy in 90 brain regions based on automated anatomical atlas (AAL). Due to exploratory nature of this study, we presented data of group-wise comparison in brain entropy between LLD vs. NC, MCI vs. NC, and LLD and MCD with a p-value below 0.001.

Results: The mean Mini-Mental State Examination (MMSE) score of LLD and MCI was 27.9 and 25.6. Under tau 2, we found higher brain entropy of LLD in left globus pallidus than MCI (p = 0.002) and NC (p = 0,009). Higher brain entropy of LLD than NC was also found in left frontal superior gyrus, left middle superior gyrus, left amygdala and left inferior parietal gyrus. The only brain region with higher brain entropy in MCI than control was left posterior cingulum (p-value = 0.015). Under tau 1, higher brain entropy was also found in LLD than in MCI in right orbital part of medial frontal gyrus and left globus pallidus (p-value = 0.007 and 0.005).

Conclusions: Our result is consistent with prior hypothesis where higher brain entropy was found during early aging process as compensation. We found such phenomenon particular in left globus pallidus in LLD, which could be served as a discriminative brain region. Being a key region in reward system, we hypothesis such region may be associated with apathy and with unique pathway of cognitive decline in LLD. We will undertake subsequent analysis longitudinally in this cohort

Key words: resting-state fMRI, Late-life depression, Brain entropy, globus pallidus, cognitive decline

This study examined the sour grapes/sweet lemons rationalization through 2 conditions: ‘attainable’ (sweet lemons) and ‘unattainable’ (sour grapes), reflecting China’s 2019-nCoV vaccination strategy. The aim was to find ways to change people’s beliefs and preferences regarding vaccines by easing their safety concerns and encouraging more willingness to get vaccinated. An online survey was conducted from January 22 to 27, 2021, with 3,123 residents across 30 provinces and municipalities in the Chinese mainland. The direction of belief and preference changed in line with the sour grapes/sweet lemons rationalization. Using hypothetical and real contrasts, we compared those for whom the vaccine was relatively unattainable (‘sour grapes’ condition) with those who could get the vaccine easily (‘sweet lemons’). Whether the vaccine was attainable was determined in the early stage of the vaccine roll-out by membership in a select group of workers that was supposed to be vaccinated to the greatest extent possible, or, by being in the second stage when the vaccine was available to all. The attainable conditions demonstrated higher evaluation in vaccine safety, higher willingness to be vaccinated, and lower willingness to wait and see. Hence, we propose that the manipulation of vaccine attainability, which formed the basis of the application of sour grapes/sweet lemons rationalization, can be utilized as a means to manipulate the choice architecture to nudge individuals to ease vaccine safety concerns, reducing wait-and-see tendencies, and enhancing vaccination willingness. This approach can expedite universal vaccination and its associated benefits in future scenarios resembling the 2019-nCoV vaccine rollout.

In this paper, a capsule endoscopy system with a sensing function is proposed for medical devices. A single-arm spiral antenna is designed for data transmission and is combined with the voltage controlled oscillator to achieve sensing capabilities. The designed antenna operates at a 900 MHz industrial scientific medical band. By establishing a three-layer cylindrical model of the stomach, it was concluded that the antenna in the stomach has a high peak gain of −1.1 dBi. Additionally, the antenna achieved a −10 dB impedance bandwidth of 5%. The capsule endoscopy was experimentally measured in both actual stomach and simulated environments. The maximum working distance of the capsule endoscope was measured to be 6.8 m. Additionally, the proposed capsule endoscope was tested for its sensing function using solutions with different dielectric constants. Finally, it was confirmed through link analysis that it has good communication capabilities. The results and analysis confirm that the proposed capsule endoscope can be used for examining gastric diseases.

Thanks to its real-time computation efficiency, deep reinforcement learning (DRL) has been widely applied in motion planning for mobile robots. In DRL-based methods, a DRL model computes an action for a robot based on the states of its surrounding obstacles, including other robots that may communicate with it. These methods always assume that the environment is attack-free and the obtained obstacles’ states are reliable. However, in the real world, a robot may suffer from obstacle localization attacks (OLAs), such as sensor attacks, communication attacks, and remote-control attacks, which cause the robot to retrieve inaccurate positions of the surrounding obstacles. In this paper, we propose a robust motion planning method ObsGAN-DRL, integrating a generative adversarial network (GAN) into DRL models to mitigate OLAs in the environment. First, ObsGAN-DRL learns a generator based on the GAN model to compute the approximation of obstacles’ accurate positions in benign and attack scenarios. Therefore, no detectors are required for ObsGAN-DRL. Second, by using the approximation positions of the surrounding obstacles, ObsGAN-DRL can leverage the state-of-the-art DRL methods to compute collision-free motion commands (e.g., velocity) efficiently. Comprehensive experiments show that ObsGAN-DRL can mitigate OLAs effectively and guarantee safety. We also demonstrate the generalization of ObsGAN-DRL.

Double-cone ignition [Zhang et al., Phil. Trans. R. Soc. A 378, 20200015 (2020)] was proposed recently as a novel path for direct-drive inertial confinement fusion using high-power lasers. In this scheme, plasma jets with both high density and high velocity are required for collisions. Here we report preliminary experimental results obtained at the Shenguang-II upgrade laser facility, employing a CHCl shell in a gold cone irradiated with a two-ramp laser pulse. The CHCl shell was pre-compressed by the first laser ramp to a density of 3.75 g/cm3 along the isentropic path. Subsequently, the target was further compressed and accelerated by the second laser ramp in the cone. According to the simulations, the plasma jet reached a density of up to 15 g/cm3, while measurements indicated a velocity of 126.8 ± 17.1 km/s. The good agreements between experimental data and simulations are documented.

In mammals, the skin acts as a barrier to prevent harmful environmental stimuli from entering the circulation. CYP450s are involved in drug biotransformation, exogenous and endogenous substrate metabolism, and maintaining the normal physiological function of the skin, as well as facilitating homeostasis of the internal environment. The expression pattern of CYP450s in the skin is tissue-specific and thus differs from the liver and other organs. The development of skin topical medications, and knowledge of the toxicity and side effects of these medications require a detailed understanding of the expression and function of skin-specific CYP450s. Thus, we summarized the expression of CYP450s in the skin, their function in endogenous metabolic physiology, aberrant CYP450 expression in skin diseases and the influence of environmental variables and medications. This information will serve as a crucial foundation for future studies on the skin, as well as for the design and development of new drugs for skin diseases including topical medications.

Various psychosocial and psychological interventions have been developed to reduce schizophrenia relapse prevention. A better understanding of these active interventions is important for clinical practice and for meaningful allocation of resources. However, no bibliometric analysis of this area has been conducted. Studies were retrieved from the Web of Science Core Collection database. The publication outputs and cooperation of institutions were visualized with Origin 2021. Global cooperation was visualized using ArcGIS Pro3.0. VOSviewer was used to generate visualizations of network of authors and keywords. The number of annual publications generally showed a fluctuating upward trend over the past 20 years. Germany published the most relevant articles (361, 26.76%). The Technical University of Munich was the most productive institution (70, 9.86%). Leucht Stefan published the most articles (46, 6.48%) and had the highest number of citations (4,375 citations). Schizophrenia Research published the most studies (39, 5.49%). Keywords were roughly classified into three clusters: cognitive behavioral therapy (CBT), family interventions and family psychoeducation and other factors related to interventions. The findings provided the current status of research on psychosocial and psychological interventions for schizophrenia relapse prevention from a bibliometric perspective. Recent research has mainly focused on CBT, family interventions and family psychoeducation.

Trauma is a significant health issue that not only leads to immediate death in many cases but also causes severe complications, such as sepsis, thrombosis, haemorrhage, acute respiratory distress syndrome and traumatic brain injury, among trauma patients. Target protein identification technology is a vital technique in the field of biomedical research, enabling the study of biomolecular interactions, drug discovery and disease treatment. It plays a crucial role in identifying key protein targets associated with specific diseases or biological processes, facilitating further research, drug design and the development of treatment strategies. The application of target protein technology in biomarker detection enables the timely identification of newly emerging infections and complications in trauma patients, facilitating expeditious medical interventions and leading to reduced post-trauma mortality rates and improved patient prognoses. This review provides an overview of the current applications of target protein identification technology in trauma-related complications and provides a brief overview of the current target protein identification technology, with the aim of reducing post-trauma mortality, improving diagnostic efficiency and prognostic outcomes for patients.

Clay mineral compositions from 2 paleosol profiles (Chu-Wan, CW, and Shiao-Men Yu, SMY, profiles) on the late-Miocene sediments in Penghu Islands (Pescadores), Taiwan, are characterized by random X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). By the clay assemblage of the paleosol profile, we want to explore the probable formation mode of the Penghu paleosols.

The paleosol profiles in study are overlain by a layer of basalt flow. However, the clay mineralogy of the 2 paleosols was not altered metasomatically after burial. Results show that 3 distinctive zones of different dominating kaolin-group minerals are apparent in the profiles. In descending order, they are: 1) spheroidal, hollow 7Å-halloysite, 2) platy, irregular-shaped and disordered kaolinite, and 3) platy, irregular-shaped, disordered kaolinite. The relative crystallinity of kaolin minerals of the 3 layers is: layer 2 > layer 3 > layer 1. On the basis of the XRD, TEM analyses and the crystallinity calculations, the distribution of kaolin in Penghu paleosol profiles appears to be unique. Penghu paleosol profiles show systematic change in kaolin crystallinity and polymorphs with depth. Because the clay type is heterogeneous within the profile, this represents that Penghu paleosol profiles were polypedogenic.

The contact between the upper basalt and the paleosol is the erosion surface, so we do not know exactly what the thickness of the original paleosol was. The first layer (about 20 cm) of the profiles appears to be constituents of the original paleosol. It contains high contents of pedogenic (in situ weathering) hematites and 7Å-halloysites, which implies that the local climate of the Penghu Islands at late Miocene was warm and humid. Intense leaching and dry/wet cycle should be the reason for high contents of halloysite (>60%) in the Penghu paleosols. Laterization was the probable pedogenic process for the formation of the paleosols.

Cannibalism is often an extreme interaction in the animal species to quell competition for limited resources. To model this critical factor, we improve the predator–prey model with nonlocal competition effect by incorporating the cannibalism term, and different kernels for competition are considered in this model numerically. We give the critical conditions leading to the double Hopf bifurcation, in which the gestation time delay and the diffusion coefficient were selected as the bifurcation parameters. The innovation of the work lies near the double Hopf bifurcation point, and the stable homogeneous and inhomogeneous periodic solutions can coexist. The theoretical results of the extended centre manifold reduction and normal form method are in good agreement with the numerical simulation.

This study assessed the efficacy of ThinPrep cytologic test and human papillomavirus (HPV) co-test in cervical cancer screening during pregnancy. A cohort of 8,712 pregnant women from Ren Ji Hospital participated in the study. Among them, 601 (6.90%) tested positive for high-risk HPV (HR-HPV) and 38 (0.44%) exhibited abnormal cytology results (ASCUS+). Following positive HR-HPV findings, 423 patients underwent colposcopy, and 114 individuals suspected of having high-grade squamous intraepithelial lesion and cervical cancer (HSIL+) underwent cervical biopsy. Histological examination revealed 60 cases of normal pathology (52.63%), 35 cases of low‐grade squamous intraepithelial lesion (30.70%), 17 cases of HSIL (14.91%), and 2 cases of cervical cancer (1.75%). The incidence of HSIL+ in HPV 16/18 group was significantly higher than that in non-HPV16/18 group (10.53% vs. 6.14%, P < 0.05). Subsequent evaluation of the clinical performance of cytology alone, primary HPV screening, and co-testing for HSIL+ detection revealed that the HSIL+ detection rate was lowest with cytology alone. These findings suggest that HPV testing, either alone or combined with cytology, presents an efficient screening strategy for pregnant women, underscoring the potential for improved sensitivity in cervical cancer screening during pregnancy. The significantly higher incidence of HSIL+ in the HPV16/18 group emphasizes the importance of genotype-specific considerations.