To meet the development needs of aeroengines for high thrust-to-weight ratios and fuel-air ratios, a high temperature rise triple-swirler main combustor was designed with a total fuel-air ratio of 0.037, utilising advanced technologies including staged combustion, multi-point injection and multi-inclined hole cooling. Fluent software was used to conduct numerical simulations under both takeoff and idle conditions, thereby obtaining the distribution characteristics of the velocity and temperature fields within the combustor, as well as the generation of pollutants. The simulation results indicate that under takeoff conditions, the high temperature rise triple-swirler combustor achieves a total pressure loss coefficient of less than 6% and a combustion efficiency exceeding 99%. Under takeoff conditions, the OTDF and RTDF values are 0.144 and 0.0738, respectively. The mole fraction of NOx emissions is 3,700ppm, while the mole fraction of soot emissions is 2.55×10−5ppm. Under idle conditions, the triple-swirler combustor maintains a total pressure loss coefficient of less than 6% and a combustion efficiency greater than 99.9%. The OTDF and RTDF values are 0.131 and 0.0624, respectively. The mole fractions of CO and UHC emissions are both 0×10−32ppm at the calculation limit of Fluent software.

With the wide application of quadrotor unmanned aerial vehicles (UAVs), the requirements for their safety and reliability are becoming increasingly stringent. In this paper, based on the feedback of airframe performance health perception information and the predictive function control strategy, the autonomous maintenance of a quadrotor UAV with multi-actuator degradation is realised. Autonomous maintenance architecture is constructed by the predictive maintenance (PdM) idea and the Laguerre function model predictive pontrol (LF-MPC) strategy. Using the two-stage Kalman filter (TSKF) method, based on the established UAV degradation model, the aircraft state and actuator degradation state are predicted simultaneously. For the predictive perception of system health, on the one hand, the system health degree (HD) based on Mahalanobis distance is defined by the degree of airframe state deviation from the expected state, and then the failure threshold of the UAV is obtained. On the other hand, according to the degradation state of each actuator, a comprehensive degradation variable fused with different weight coefficients of multiple actuators degradation is used to obtain the probability density function (PDF) of remaining useful life (RUL) prediction. For the autonomous maintenance of system health, the LF-MPC weight matrixes are adjusted adaptively in real-time based on the HD evaluation, to achieve a compromise balance between UAV performance and control effect, and greatly extend the working time of UAV. Simulation results verified the effectiveness of the proposed method.

Cruznema velatum isolated from soil in a chestnut orchard located at Guangdong province, China, is redescribed with morphology, molecular barcoding sequences, and transcriptome data. The morphological comparison for C. velatum and six other valid species is provided. Phylogeny analysis suggests genus Cruznema is monophyletic. The species is amphimix, can be cultured with Escherichia coli in 7–9 days from egg to egg-laying adult, and has a lifespan of 11 to 14 days at 20°C. The transcription data generated 45,366 unigenes; 29.9%, 31.3%, 24.8%, and 18.6% of unigenes were annotated in KOG, SwissProt, GO, and KEGG, respectively. Further gene function analysis demonstrated that C. velatum share the same riboflavin, lipoic acid, and vitamin B6 metabolic pathways with Caenorhabditis elegans and Pristionchus pacificus.

Vortex shedding in the wake of a cylinder in uniform flow can be suppressed via the application of a porous coating; however, the suppression mechanism is not fully understood. The internal flow field of a porous coated cylinder (PCC) can provide a deeper understanding of how the flow within the porous medium affects the wake development. A structured PCC (SPCC) was three-dimensionally printed using a transparent material and tested in water tunnel facilities using flow visualisation and tomographic particle image velocimetry at outer-diameter Reynolds numbers of $Re = 7 \times 10^{3}$ and $7.3 \times 10^{4}$, respectively. The internal and near-wall flow fields are analysed at the windward and mid-circumference regions. Flow stagnation is observed in the porous layer on the windward side and its boundary is shown to fluctuate with time in the outermost porous layer. This stagnation region generates a quasi-aerodynamic body that influences boundary layer development on the SPCC inner diameter, that separates into a shear layer within the porous medium. For the first time via experiment, spectral content within the separated shear layer reveals vortex shedding processes emanating through single pores at the outer diameter, providing strong evidence that SPCC vortex shedding originates from the inner diameter. Velocity fluctuations linked to this vortex shedding propagate through the porous layers into the external flow field at a velocity less than that of the free stream. The Strouhal number linked to this velocity accurately predicts the SPCC vortex shedding frequency.

Parenting can protect against the development of, or increase risk for, child psychopathology; however, it is unclear if parenting is related to psychopathology symptoms in a specific domain, or to broad liability for psychopathology. Parenting differs between and within families, and both overall family-level parenting and the child-specific parenting a child receives may be important in estimating transdiagnostic associations with psychopathology. Data come from a cross-sectional epidemiological sample (N = 10,605 children ages 4–17, 6434 households). Parents rated child internalizing and externalizing symptoms and their parenting toward each child. General and specific (internalizing, externalizing) psychopathology factors, derived with bifactor modeling, were regressed on parenting using multilevel modeling. Less warmth and more aversive/inconsistent parenting in the family, and toward an individual child relative to family average, were associated with higher general psychopathology and specific externalizing problems. Unexpectedly, more warmth in the family, and toward an individual child relative to family average, was associated with higher specific internalizing problems in 4–11 (not 12–17) year-olds. Less warmth and more aversive/inconsistent parenting are broad correlates of child psychopathology. Aversive/inconsistent parenting, is also related to specific externalizing problems. Parents may behave more warmly when their younger children have specific internalizing problems, net of overall psychopathology.

Steinernema populi n. sp. was recovered by baiting from beneath poplar trees in China. Morphological and molecular features provided evidence for placing the new species into the Kushidai clade. The new species is characterized by the following morphological features: third-stage infective juveniles (IJ) with a body length of 1095 (973–1172) μm, a distance from the anterior end to excretory pore of 77 (70–86) μm and a tail length of 64 (55–72) μm. The Body length/Tail length (c) ratio and Anterior end to Excretory pore/ Tail length × 100 (E%) of S. populi n. sp. are substantially greater than those of all other ‘Feltiae–Kushidai–Monticolum’ group members. The first-generation males can be recognized by a spicule length of 66 (57–77) μm and a gubernaculum length of 46 (38–60) μm. The new species is further characterized by sequences of the internal transcribed spacer and partial 28S regions of the ribosomal DNA. Phylogenetic analyses show that Steinernema akhursti and Steinernema kushidai are the closest relatives to S. populi n. sp.

The Hierarchical Taxonomy of Psychopathology (HiTOP) has emerged out of the quantitative approach to psychiatric nosology. This approach identifies psychopathology constructs based on patterns of co-variation among signs and symptoms. The initial HiTOP model, which was published in 2017, is based on a large literature that spans decades of research. HiTOP is a living model that undergoes revision as new data become available. Here we discuss advantages and practical considerations of using this system in psychiatric practice and research. We especially highlight limitations of HiTOP and ongoing efforts to address them. We describe differences and similarities between HiTOP and existing diagnostic systems. Next, we review the types of evidence that informed development of HiTOP, including populations in which it has been studied and data on its validity. The paper also describes how HiTOP can facilitate research on genetic and environmental causes of psychopathology as well as the search for neurobiologic mechanisms and novel treatments. Furthermore, we consider implications for public health programs and prevention of mental disorders. We also review data on clinical utility and illustrate clinical application of HiTOP. Importantly, the model is based on measures and practices that are already used widely in clinical settings. HiTOP offers a way to organize and formalize these techniques. This model already can contribute to progress in psychiatry and complement traditional nosologies. Moreover, HiTOP seeks to facilitate research on linkages between phenotypes and biological processes, which may enable construction of a system that encompasses both biomarkers and precise clinical description.

Flutter suppression is an important measure to improve fatigue life and enhance the performance of aircraft in modern aircraft design. In order to design more effective controllers for flutter suppression with high efficiency, an efficient reduced-order framework for active/passive hybrid flutter suppression is proposed. The traditional CFD-based ROMs have been successfully applied to active flutter suppression with high accuracy and efficiency. But, when a structure modification is made such as in aeroelastic tailoring and aeroelastic structural optimisation, the structural model should be updated, and the expensive, time-consuming CFD-based ROMs have to be reconstructed; such a process is impractical for passive flutter suppression. To overcome the realistic challenge, an efficient reduced-order framework for active/passive hybrid flutter suppression is proposed by extending an efficient aeroelastic CFD-based POD/ROM which we have developed. The proposed framework is demonstrated and evaluated using an improved AGARD 445.6 wing model. The results show that the proposed framework can accurately predict the aeroelastic response for active/passive hybrid flutter suppression with high efficiency. It provides a powerful tool for active/passive hybrid flutter suppression, and therefore, is ideally suited to design more effective controllers, and may have the potential to reduce the overall cost of aircraft design.

Background: Standardized magnetic resonance imaging (MRI) guidelines published in 2015 by the Europoean MAGNIMS group and in 2016 by the CMSC are important for the diagnosis and monitoring of patients with multiple sclerosis (MS) and for the appropriate use of MRI in routine clinical practice. Methods: Two panels of experts convened to update existing guidelines for a standardized MRI protocol. The MAGNIMS panel convened in Graz, Austria in April 2019. The CMSC NAIMS panel met separately and independently in Newark, USA in October 2019. Subsequently, the MAGNIMS, NAIMS, and CMSC working groups combined their efforts to reach an international consensus Results: The revised guidelines on MRI in MS merges recommendations from MAGNIMS, CMSC, and NAIMS to improve the use of MRI for diagnosis, prognosis and monitoring of individuals with MS. 3D acquisitions are emphasized for optimal comparison over time. Core brain sequences include a 3D-T2wFLAIR for lesion identification and monitoring treatment effectiveness. Gadolinium-based contrast is recommended for diagnostic studies and judicious use for routine monitoring of MS patients. DWI sequences are recommended for PML safety monitoring. Conclusions: The international consensus guidelines strive for global acceptance of a useful and usable standard of care for patients with MS.

The present paper uses the detailed flow data produced by direct numerical simulation (DNS) of a three-dimensional, spatially developing plane free shear layer to assess several commonly used turbulence models in compressible flows. The free shear layer is generated by two parallel streams separated by a splitter plate, with a naturally developing inflow condition. The DNS is conducted using a high-order discontinuous spectral element method (DSEM) for various convective Mach numbers. The DNS results are employed to provide insights into turbulence modelling. The analyses show that with the knowledge of the Reynolds velocity fluctuations and averages, the considered strong Reynolds analogy models can accurately predict temperature fluctuations and Favre velocity averages, while the extended strong Reynolds analogy models can correctly estimate the Favre velocity fluctuations and the Favre shear stress. The pressure–dilatation correlation and dilatational dissipation models overestimate the corresponding DNS results, especially with high compressibility. The pressure–strain correlation models perform excellently for most pressure–strain correlation components, while the compressibility modification model gives poor predictions. The results of an a priori test for subgrid-scale (SGS) models are also reported. The scale similarity and gradient models, which are non-eddy viscosity models, can accurately reproduce SGS stresses in terms of structure and magnitude. The dynamic Smagorinsky model, an eddy viscosity model but based on the scale similarity concept, shows acceptable correlation coefficients between the DNS and modelled SGS stresses. Finally, the Smagorinsky model, a purely dissipative model, yields low correlation coefficients and unacceptable accumulated errors.

The compressibility effects on energy exchange mechanisms in a three-dimensional, spatially developing plane free shear layer are investigated via data produced by direct numerical simulation. The compressible shear layer is simulated using a high-order discontinuous spectral element method for convective Mach numbers $M_c = 0.3$, 0.5 and 0.7. The energy exchange mechanisms in the flow are examined by analysing the budget terms of mean kinetic, internal and turbulent kinetic energy transport equations, in both transition and turbulent regions. The results show that turbulent production, turbulent viscous dissipation, mean viscous dissipation, pressure dilatation and enthalpic production are the main mechanisms responsible for energy exchange among different forms of energy. The effects of compressibility on energy transfer mechanisms are studied based on the analyses of those five budget terms. The primary budget terms evolve differently in the transition and turbulent regions and change significantly for varying compressibility. In the transition region, a double-peak variation becomes a single peak in the streamwise profile of the turbulent production as $M_c$ increases from 0.3 to 0.7, due to significant changes in the vortex pairing structures. The shear layer centre slightly shifts to the high-speed side due to the appearance of the velocity deficit. The velocity deficit presence distance (VDPD) becomes longer as compressibility increases. However, in the turbulent region, the cross-stream profiles of the main budget terms significantly shift to the low-speed side because of the asymmetric mass entrainment and shift even further as $M_c$ increases.

It is important to understand the temporal trend of the paediatric severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) viral load to estimate the transmission potential of children in schools and communities. We determined the differences in SARS-CoV-2 viral load dynamics between nasopharyngeal samples of infected asymptomatic and symptomatic children. Serial cycle threshold values of SARS-CoV-2 from the nasopharynx of a cohort of infected children were collected for analysis. Among 17 infected children, 10 (58.8%) were symptomatic. Symptomatic children, when compared to asymptomatic children, had higher viral loads (mean cycle threshold on day 7 of illness 28.6 vs. 36.7, P = 0.02). Peak SARS-CoV-2 viral loads occurred around day 2 of illness in infected children. Although we were unable to directly demonstrate infectivity, the detection of significant amount of virus in the upper airway of asymptomatic children suggest that they have the potential to shed and transmit SARS-CoV-2. Our study highlights the importance of contact tracing and screening for SARS-CoV-2 in children with epidemiological risk factors regardless of their symptom status, in order to improve containment of the virus in the community, including educational settings.