We incorporate the liquidity trap and private behavioral preferences into a New Keynesian dynamic stochastic general equilibrium model to analyze fiscal multipliers. The results indicate that the influence of the liquidity trap on fiscal policy is driven by a combination of the interest rate transmission effect and the precautionary savings effect, showing a notable amplification of multipliers based on estimates from U.S. data. Furthermore, we examine two types of private behavioral preferences: habit formation and investor confidence. Habit formation significantly boosts short-term government spending multipliers while exhibiting diverse impacts on different types of taxation. Compared to superficial habits, deep habits result in flatter multiplier curves. Investor confidence, being highly sensitive to output fluctuations, enhances both spending and tax multipliers over the medium to long term. Additionally, the investor confidence channel slightly amplifies the expansionary effect of the liquidity trap on multipliers, contrasting with the impact of habit formation.

In multidimensional tests, the identification of latent traits measured by each item is crucial. In addition to item–trait relationship, differential item functioning (DIF) is routinely evaluated to ensure valid comparison among different groups. The two problems are investigated separately in the literature. This paper uses a unified framework for detecting item–trait relationship and DIF in multidimensional item response theory (MIRT) models. By incorporating DIF effects in MIRT models, these problems can be considered as variable selection for latent/observed variables and their interactions. A Bayesian adaptive Lasso procedure is developed for variable selection, in which item–trait relationship and DIF effects can be obtained simultaneously. Simulation studies show the performance of our method for parameter estimation, the recovery of item–trait relationship and the detection of DIF effects. An application is presented using data from the Eysenck Personality Questionnaire.

EXOSC10 is an exosome-associated ribonuclease that degrades and processes a wide range of transcripts in the nucleus. The initial segment (IS) of the epididymis is crucial for sperm transport and maturation in mice by affecting the absorption and secretion that is required for male fertility. However, the role of EXOSC10 ribonuclease-mediated RNA metabolism within the IS in the regulation of gene expression and sperm maturation remains unknown. Herein, we established an Exosc10 conditional knockout (Exosc10 cKO) mouse model by crossing Exosc10F/F mice with Lcn9-Cre mice which expressed recombinase in the principal cells of IS as early as post-natal day 17. Morphological and histological analyses revealed that Exosc10 cKO males had normal spermatogenesis and development of IS. Moreover, the sperm concentration, morphology, motility, and frequency of acrosome reactions in the cauda epididymides of Exosc10 cKO mice were comparable with those of control mice. Thus, Exosc10 cKO males had normal fertility. Collectively, our genetic mouse model and findings demonstrate that loss of EXOSC10 in the IS of epididymis is dispensable for sperm maturation and male fertility.

The development of thermal boundary layers and plume near a section-triangular roof under different isothermal heating conditions has been the focus of numerous numerical studies. However, flow transition in this type of flow has never been observed experimentally. Here, phase-shifting interferometry and thermistor measurements are employed to experimentally observe and quantify the flow transitions in a buoyancy-driven flow over an isothermal section-triangular roof. Visualisation of temperature contours is conducted across a wide range of Rayleigh numbers from laminar at 103 to chaotic state at 4 × 106. Power spectral density of the temperature measurements reveals the type of bifurcations developing as the Rayleigh number is increased. This flow transition is characterised as a complex bifurcation route with the presence of two fundamental frequencies, a low and a high frequency. We found that the thermal stratification in the environment plays a significant role in the flow transition. The spatial development of flow is also quantitatively and qualitatively described. In addition to clarifying flow transition in experiments, the work demonstrates the implementation of phase-shifting interferometry and punctual temperature measurements for characterisation of near-field flow over a heated surface.

Growing evidence indicates a link between diet and depression risk. We aimed to examine the association between an inflammatory diet index and depression utilising extensive data from UK biobank cohort. The energy-adjusted dietary inflammation index (E-DII) was calculated to quantify the potential of daily diet, with twenty-seven food parameters utilised. The E-DII scores were classified into two categories (low v. high) based on median value. To mitigate bias and ensure comparability of participant characteristics, propensity score matching was employed. To ascertain the robustness of these associations, sensitivity analyses were conducted. Subgroup analyses were performed to evaluate the consistency of these associations within different subpopulations. Totally, 152 853 participants entered the primary analyses with a mean age of 56·11 (sd 7·98) years. Employing both univariate and multivariate logistic regression models, adjustments were made for varying degrees of confounding factors (socio-demographics, lifestyle factors, common chronic medical conditions including type 2 diabetes and hypertension). Results consistently revealed a noteworthy positive correlation between E-DII and depression. In the context of propensity score matching, participants displaying higher E-DII scores exhibited an increased likelihood of experiencing incident depression (OR = 1·12, 95 % CI: 1·05, 1·19; P = 0·000316). Subgroup analysis results demonstrated variations in these associations across diverse subpopulations. The E-value for the point-estimate OR calculated from the propensity score matching dataset was 1·48. Excluding individuals diagnosed with type 2 diabetes or hypertension, the findings consistently aligned with the positive association in the primary analysis. These findings suggested that consumption of a diet with higher pro-inflammatory potential might associated with an increase of future depression risk.

Aphis gossypii is one of the most economically important agricultural pests that cause serious crop losses worldwide, and the indiscriminate chemical application causes resistance development in A. gossypii, a major obstacle to successful control. In this study, we selected the up-regulated expression gene AgJHAMT, which was enriched into juvenile hormone pathway though transcriptome sequencing analysis of the cotton aphids that fed on transgenic cotton lines expressing dsAgCYP6CY3 (the TG cotton). The AgJHAMT gene was overexpressed in cotton aphids which fed on the TG cotton, and its expression profile during the nymphs was clarified. Then, silencing AgJHAMT could advance the developmental period of cotton aphids by 0.5 days compared with control groups. The T and t values of cotton aphids in the dsJHAMT treatment group (6.88 ± 0.15, 1.65 ± 0.06) were significantly shorter than that of the sprayed H2O control group (7.6 ± 0.14, 1.97 ± 0.09) (P < 0.05), respectively. The fast growth caused by AgJHAMT silencing was rescued by applying the JH analogue, methoprene. Overall, these findings clarified the function of AgJHAMT in the developmental period of A. gossypii. This study contributes to further clarify the molecular mechanisms of delaying the growth and development of cotton aphids by the transgenic cotton lines expressing dsAgCYP6CY3.

The transition route and bifurcations of the buoyant flows developing on a heated horizontal circular surface are elaborated using direct numerical simulations and direct stability analysis. A series of bifurcations, as a function of Rayleigh numbers ($Ra$) ranging from $10^6$ to $6.0\times 10^7$, are found on the route to chaos of the flows at $Pr=7$. When $Ra<1.0\times 10^3$, the buoyant flows above the heated horizontal surface are dominated by conduction, because of which the distinct thermal boundary layer and plume are not present. At $Ra=1.1\times 10^6$, a Hopf bifurcation occurs, resulting in the flow transition from a steady state to a periodic puffing state. As $Ra$ increases further, the flow enters a periodic rotating state at $Ra=1.9\times 10^6$, which is a unique state that was rarely discussed in the literature. These critical transitions, leaving from a steady state and subsequently entering a series of periodic states (puffing, rotating, flapping and period-doubling) and finally leading to chaos, are diagnosed using two-dimensional Fourier transforms. Moreover, direct stability analysis is conducted by introducing random numerical perturbations into the boundary condition of the surface heating. We find that when the state of a flow is in the vicinity of critical values (e.g. $Ra=2.0\times 10^6$), the flow is conditionally unstable to perturbations, and it can bifurcate from the rotating state to the flapping state in advance. However, for relatively stable flow states, such as at $Ra=1.5\times 10^6$, the flow remains in its periodic puffing state even though it is being perturbed.

This paper presents a comprehensive technical overview of the Linac Coherent Light Source II (LCLS-II) photoinjector laser system, its first and foremost component. The LCLS-II photoinjector laser system serves as an upgrade to the original LCLS at SLAC National Accelerator Laboratory. This advanced laser system generates high-quality laser beams for the LCLS-II, contributing to the instrument’s unprecedented brightness, precision and flexibility. Our discussion extends to the various subsystems that comprise the photoinjector, including the photocathode laser, laser heater and beam transport systems. Lastly, we draw attention to the ongoing research and development infrastructure underway to enhance the functionality and efficiency of the LCLS-II, and similar X-ray free-electron laser facilities around the world, thereby contributing to the future of laser technology and its applications.

Syphilis remains a serious public health problem in mainland China that requires attention, modelling to describe and predict its prevalence patterns can help the government to develop more scientific interventions. The seasonal autoregressive integrated moving average (SARIMA) model, long short-term memory network (LSTM) model, hybrid SARIMA-LSTM model, and hybrid SARIMA-nonlinear auto-regressive models with exogenous inputs (SARIMA-NARX) model were used to simulate the time series data of the syphilis incidence from January 2004 to November 2023 respectively. Compared to the SARIMA, LSTM, and SARIMA-LSTM models, the median absolute deviation (MAD) value of the SARIMA-NARX model decreases by 352.69%, 4.98%, and 3.73%, respectively. The mean absolute percentage error (MAPE) value decreases by 73.7%, 23.46%, and 13.06%, respectively. The root mean square error (RMSE) value decreases by 68.02%, 26.68%, and 23.78%, respectively. The mean absolute error (MAE) value decreases by 70.90%, 23.00%, and 21.80%, respectively. The hybrid SARIMA-NARX and SARIMA-LSTM methods predict syphilis cases more accurately than the basic SARIMA and LSTM methods, so that can be used for governments to develop long-term syphilis prevention and control programs. In addition, the predicted cases still maintain a fairly high level of incidence, so there is an urgent need to develop more comprehensive prevention strategies.

The laboratory generation and diagnosis of uniform near-critical-density (NCD) plasmas play critical roles in various studies and applications, such as fusion science, high energy density physics, astrophysics as well as relativistic electron beam generation. Here we successfully generated the quasistatic NCD plasma sample by heating a low-density tri-cellulose acetate (TCA) foam with the high-power-laser-driven hohlraum radiation. The temperature of the hohlraum is determined to be 20 eV by analyzing the spectra obtained with the transmission grating spectrometer. The single-order diffraction grating was employed to eliminate the high-order disturbance. The temperature of the heated foam is determined to be T = 16.8 ± 1.1 eV by analyzing the high-resolution spectra obtained with a flat-field grating spectrometer. The electron density of the heated foam is about $N_e=4.0\pm 0.3\times {10}^{20}{\text{cm}}^{-3}$ under the reasonable assumption of constant mass density.

Sepiolite-based composites have great potential for application as flame-retardant and thermal-insulation material but their application and development are limited by poor mechanical properties. The objective of the present study was to combine polyvinyl alcohol (PVA) and 3-aminopropyltriethoxysilane (KH-550) with sepiolite (Sep) to improve its aerogel strength. A universal testing machine, thermogravimetry, and microcalorimetry were used to investigate the mechanical properties, thermal-stability, and flame-retardant properties, respectively, of aerogels. The results indicated that KH-550 can enhance effectively the mechanical properties and flame retardancy of aerogels. The compressive modulus of PVA/Sep vs KH-550/PVA/Sep aerogel was 209.28 vs. 474.43 kPa, the LOI index changed from 26.4 to 30.4%. The porosity of the aerogels was > 96% and the density was < 0.05 g/cm3. The thermal conductivity remained at between 0.0340 and 0.0390 W/(m·K), and the aerogel could recover to > 85% after a 50% compressive deformation. These data indicated that Sep-based aerogel would act as a flame retardant and a thermal insulating material with excellent mechanical properties.

The construction of organic-inorganic hybrid ferroelectric materials with larger, high-polarity guest molecules intercalated in kaolinite (K) faces difficulties in terms of synthesis and uncertainty of structure-property relationships. The purpose of the present study was to optimize the synthesis method and to determine the mechanism of ferroelectric behavior of kaolinite intercalated with p-aminobenzamide (PABA), with an eye to improving the design of intercalation methods and better utilization of clay-based ferroelectric materials. The K-PABA intercalation compound (chemical formula Al2Si2O5(OH)4∙(PABA)0.7) was synthesized in an autoclave and then characterized using X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The experimental results showed that PABA expanded the kaolinite interlayer from 7.2 Å to 14.5 Å, and the orientation of the PABA molecule was ~70° from the plane of the kaolinite layers. The amino group of the PABA molecule was close to the Si sheet. The presence of intermolecular hydrogen bonds between kaolinite and PABA and among PABA molecules caused macro polarization of K-PABA and dipole inversion under the external electric field, resulting in K-PABA ferroelectricity. Simulation calculations using the Cambridge Sequential Total Energy Package (CASTEP) and the ferroelectricity test revealed the optimized intercalation model and possible ferroelectric mechanism.