Maintaining jaguar Panthera onca subpopulations throughout Mesoamerica is vital to range-wide jaguar conservation. Corcovado National Park in Costa Rica is critical habitat for the Osa Peninsula jaguar subpopulation. There is a debate regarding whether the jaguars in this National Park are in a state of crisis. To examine this, we implemented long-term camera-trap monitoring throughout Corcovado National Park during 2015–2021. Using a spatially explicit Jolly–Seber model we estimated jaguar populations and distribution throughout our study area. Additionally, we reran our model using a constrained study area to compare our findings with those of a previous study. Trends in jaguar abundance indices and population estimates during 2015–2021 indicate that jaguar abundance has increased over time. Our jaguar density estimates also fall within the range of jaguar densities reported for relatively stable populations elsewhere. Using the same study area as that of a prior study, jaguar densities also increased over the duration of our study and were mostly comparable to previous density estimates. Our results suggest that jaguars within Corcovado National Park may not be in a state of crisis. Rather, our findings provide further hope for the jaguars of the Osa Peninsula. They do not, however, diminish the importance of continued conservation efforts. These will remain critical both inside and outside Corcovado National Park, as threats appear to have persisted over time.

The three-dimensional stability of two-dimensional natural convection flows in a heated, square enclosure inclined to the horizontal is investigated numerically. First, the computational procedure is validated by comparison of base flow solutions to results reported in literature across a range of inclinations. A bi-global linear stability analysis is then conducted to investigate the stability of these two-dimensional base flows to infinitesimal three-dimensional perturbations, and the effect that buoyancy forces (defined by a buoyancy number $R_N$) and enclosure inclination $\theta$ have on these stability characteristics. The flow is first observed to become three-dimensionally unstable at buoyancy number $R_N = 213.8$ when $\theta$ is $180^\circ$; this increases to $R_N = 2.54 \times 10^4$ at inclination $\theta =58^\circ$. It is found that the two-dimensional base flow is more unstable to three-dimensional perturbations with the critical $R_N$ corresponding to three-dimensional instability being significantly lower than its two-dimensional counterpart across all considered inclinations except $83^\circ \leq \theta \leq 88^\circ$, where the most unstable mode is a two-dimensional oscillatory mode that develops in the boundary layers along the conducting walls. Eight different leading three-dimensional instability modes are identified, with inclinations $58^\circ \leq \theta < 88^\circ$ transitioning through an oscillatory mode, and inclinations $88^\circ \leq \theta \leq 180^\circ$ transitioning through a stationary mode. The characteristics of the primary instability modes corresponding to inclinations $88^\circ \leq \theta \leq 179^\circ$ indicate the presence of a Taylor–Görtler instability.

Highly portable and accessible MRI technology will allow researchers to conduct field-based MRI research in community settings. Previous guidance for researchers working with fixed MRI does not address the novel ethical, legal, and societal issues (ELSI) of portable MRI (pMRI). Our interdisciplinary Working Group (WG) previously identified 15 core ELSI challenges associated with pMRI research and recommended solutions. In this article, we distill those detailed recommendations into a Portable MRI Research ELSI Checklist that offers practical operational guidance for researchers contemplating using this technology.

We present the Pilot Survey Phase 2 data release for the Wide-field ASKAP L-band Legacy All-sky Blind surveY (WALLABY), carried-out using the Australian SKA Pathfinder (ASKAP). We present 1760 H i detections (with a default spatial resolution of 30′′) from three pilot fields including the NGC 5044 and NGC 4808 groups as well as the Vela field, covering a total of $\sim 180$ deg$^2$ of the sky and spanning a redshift up to $z \simeq 0.09$. This release also includes kinematic models for over 126 spatially resolved galaxies. The observed median rms noise in the image cubes is 1.7 mJy per 30′′ beam and 18.5 kHz channel. This corresponds to a 5$\sigma$ H i column density sensitivity of $\sim 9.1\times10^{19}(1 + z)^4$ cm$^{-2}$ per 30′′ beam and $\sim 20$ km s$^{-1}$ channel and a 5$\sigma$ H i mass sensitivity of $\sim 5.5\times10^8 (D/100$ Mpc)$^{2}$ M$_{\odot}$ for point sources. Furthermore, we also present for the first time 12′′ high-resolution images (“cut-outs”) and catalogues for a sub-sample of 80 sources from the Pilot Survey Phase 2 fields. While we are able to recover sources with lower signal-to-noise ratio compared to sources in the Public Data Release 1, we do note that some data quality issues still persist, notably, flux discrepancies that are linked to the impact of side lobes associated with the dirty beams due to inadequate deconvolution. However, in spite of these limitations, the WALLABY Pilot Survey Phase 2 has already produced roughly a third of the number of HIPASS sources, making this the largest spatially resolved H i sample from a single survey to date.

The motion of rigid particles in complex fluids is ubiquitous in natural and industrial processes. The most popular toy model for understanding the physics of such systems is the settling of a solid sphere in a viscoelastic fluid. There is general agreement that an elastic wake develops downstream of the sphere, causing the breakage of fore-and-aft symmetry, while the flow remains axisymmetric, independent of fluid viscoelasticity and flow conditions. Using a continuum mechanics model, we reveal that axisymmetry holds only for weak viscoelastic flows. Beyond a critical value of the settling velocity, steady, non-axisymmetric disturbances develop peripherally of the rear pole of the sphere, giving rise to a four-lobed fingering instability. The transition from axisymmetric to non-axisymmetric flow fields is characterized by a regular bifurcation and depends solely on the interplay between shear and extensional properties of the viscoelastic fluid under different flow regimes. At higher settling velocities, each lobe tip is split into two new lobes, resembling fractal fingering in interfacial flows. For the first time, we capture an elastic fingering instability under steady-state conditions, and provide the missing information for understanding and predicting such instabilities in the response of viscoelastic fluids and soft media.

Unhealthy food environments are major drivers of obesity and diet-related diseases(1). Improving the healthiness of food environments requires a widespread organised response from governments, civil society, and industry(2). However, current actions often rely on voluntary participation by industry, such as opt-in nutrition labelling schemes, school/workplace food guidelines, and food reformulation programmes. The aim of the REFORM study is to determine the effects of the provision of tailored support to companies on their nutrition-related policies and practices, compared to food companies that are not offered the programme (the control). REFORM is a two-country, parallel cluster randomised controlled trial. 150 food companies were randomly assigned (2:1 ratio) to receive either a tailored support intervention programme or no intervention. Randomisation was stratified by country (Australia, New Zealand), industry sector (fast food, other packaged food/beverage companies), and company size. The primary outcome is the nutrient profile (measured using Health Star Rating [HSR]) of foods and drinks produced by participating companies at 24 months post-baseline. Secondary outcomes include company nutrition policies and commitments, the nutrient content (sodium, sugar, saturated fat) of products produced by participating companies, display of HSR labels, and engagement with the intervention. Eighty-three eligible intervention companies were invited to take part in the REFORM programme and 21 (25%) accepted and were enrolled. Over 100 meetings were held with company representatives between September 2021 and December 2022. Resources and tailored reports were developed for 6 touchpoints covering product composition and benchmarking, nutrition labelling, consumer insights, nutrition policies, and incentives for companies to act on nutrition. Detailed information on programme resources and preliminary 12-month findings will be presented at the conference. The REFORM programme will assess if provision of tailored support to companies on their nutrition-related policies and practices incentivises the food industry to improve their nutrition policies and actions.

Steinernema longicaudum Shen & Wang is redescribed based on a comparative morphological study of specimens from the type isolate from China, and two other isolates recovered from Korea and the USA. For the first and second generation female, the location of the vulva, shape of the vulval lips, and shape and length of the tail were newly observed diagnostic characters. A more detailed description of the morphology of the male spicules and gubernaculum, and the arrangement of the genital papillae is included. A description, based on scanning electron microscopy observations, of the lateral field pattern of the third-stage infective juveniles is also provided. Additionally, restriction fragment length polymorphism profiles based on the internal transcribed spacer region, and cross-breeding tests supplement the description of this species.

A kaolin clay occurring in Carboniferous mudstone near the Jiangshan-Shaoxing deep fault in Zhejiang Province, eastern China was characterized by XRD and IR. Although the dominant mineral appeared to be kaolinite, IR also suggested the possible occurrence of nacrite. This was confirmed by forming intercalation complexes with potassium acetate and with hydrazine hydrate, both water complexes having the same characteristic spacing at 8.35 Â. Different particle size fractions of the kaolin clay were studied and the results indicated that nacrite content increased with increasing particle size. This occurrence of nacrite is consistent with previous findings of the polytype in high temperature and pressure environments.

With the wide application of quadrotor unmanned aerial vehicles (UAVs), the requirements for their safety and reliability are becoming increasingly stringent. In this paper, based on the feedback of airframe performance health perception information and the predictive function control strategy, the autonomous maintenance of a quadrotor UAV with multi-actuator degradation is realised. Autonomous maintenance architecture is constructed by the predictive maintenance (PdM) idea and the Laguerre function model predictive pontrol (LF-MPC) strategy. Using the two-stage Kalman filter (TSKF) method, based on the established UAV degradation model, the aircraft state and actuator degradation state are predicted simultaneously. For the predictive perception of system health, on the one hand, the system health degree (HD) based on Mahalanobis distance is defined by the degree of airframe state deviation from the expected state, and then the failure threshold of the UAV is obtained. On the other hand, according to the degradation state of each actuator, a comprehensive degradation variable fused with different weight coefficients of multiple actuators degradation is used to obtain the probability density function (PDF) of remaining useful life (RUL) prediction. For the autonomous maintenance of system health, the LF-MPC weight matrixes are adjusted adaptively in real-time based on the HD evaluation, to achieve a compromise balance between UAV performance and control effect, and greatly extend the working time of UAV. Simulation results verified the effectiveness of the proposed method.

To accelerate high-intensity heavy-ion beams to high energy in the booster ring (BRing) at the High-Intensity Heavy-Ion Accelerator Facility (HIAF) project, we take the typical reference particle 238U35+, which can be accelerated from an injection energy of 17 MeV/u to the maximal extraction energy of 830 MeV/u, as an example to study the basic processes of longitudinal beam dynamics, including beam capture, acceleration, and bunch merging. The voltage amplitude, the synchronous phase, and the frequency program of the RF system during the operational cycle were given, and the beam properties such as bunch length, momentum spread, longitudinal beam emittance, and beam loss were derived, firstly. Then, the beam properties under different voltage amplitude and synchronous phase errors were also studied, and the results were compared with the cases without any errors. Next, the beam properties with the injection energy fluctuation were also studied. The tolerances of the RF errors and injection energy fluctuation were dictated based on the CISP simulations. Finally, the effect of space charge at the low injection energy with different beam intensities on longitudinal emittance and beam loss was evaluated.

REAP-2 is an interactive dose-response curve estimation tool for Robust and Efficient Assessment of drug Potency. It provides user-friendly dose-response curve estimation for in vitro studies and conducts statistical testing for model comparisons with a redesigned user interface. We also make a major update of the underlying estimation method with penalized beta regression, which demonstrates great reliability and accuracy in dose estimation and uncertainty quantification. In this note, we describe the method and implementation of REAP-2 with a highlight on potency estimation and drug comparison.

Background: Enhanced recovery after surgery (ERAS) concept has been implemented in many surgical specialties, with improved surgical and clinical outcomes, all while decreasing hospital cost. We have established a single center ERAS protocol for Anterior Cervical Discectomy and Fusion (ACDF) same-day surgeries. Methods: A retrospective analysis of prospective collected data of all patients undergoing one to two level ACDF surgeries at the CHUM based on a patient selection criteria’s list. Demographics, BMI, patient report outcome measures (NDI, VAS, mJOA), operative time, wake up time, time in recovery room and time till discharge were analysed. Complications were also noted. Results: When compared to our pre-ERAS group, our study showed that an ERAS protocol in select patients is not associated with any peri-operative complications, no 30-day / 90-day readmissions, nor any conversion to admission. All patients were safely discharged as planned. Operative length was similar. There was no dysphagia noted. There was improvement in all PROMs. Conclusions: ERAS protocol for ACDF same day surgeries in carefully selected patients is safe and provide same clinical outcomes. Meticulous surgical techniques, close post operative observation with a follow-up telephone call the next day are all key in assuring a safe and successful surgery and patient discharge.

As a typical plasma-based optical element that can sustain ultra-high light intensity, plasma density gratings driven by intense laser pulses have been extensively studied for wide applications. Here, we show that the plasma density grating driven by two intersecting driver laser pulses is not only nonuniform in space but also varies over time. Consequently, the probe laser pulse that passes through such a dynamic plasma density grating will be depolarized, that is, its polarization becomes spatially and temporally variable. More importantly, the laser depolarization may spontaneously take place for crossed laser beams if their polarization angles are arranged properly. The laser depolarization by a dynamic plasma density grating may find application in mitigating parametric instabilities in laser-driven inertial confinement fusion.

FFD (free-form deformation method) is one of the most commonly used parameterisation methods at present. It places the parameterised objects inside the control volume through coordinate system transformation, and controls the control volume through control points, thus realising the deformation control of its internal objects. Firstly, this paper systematically analyses and compares the characteristics and technical requirements of Bernstein, B-spline and NURBS (non-uniform rational b-splines) basic functions that can be adopted by FFD, and uses the minimum number of control points required to achieve the specified control effect threshold to express the control capability. Aiming at the problem of discontinuity at the right end in the actual calculation of B-spline basis function, a method of adding a small epsilon is proposed to solve it. Then, three basic functions are applied to the FFD parameterisation method, respectively, and the differences are compared from two aspects of the accurate expression of the model and the ability of deformation control. It is found that the BFFD (b-spline free-form deformation) approach owns better comprehensive performance when the control points are distributed correctly. In this paper, the BFFD method is improved, and a p-BFFD (reverse solution points based BFFD) method based on inverse solution is proposed to realise the free distribution of control points under the specified topology. Further, for the lifting body configuration, the control points of the p-BFFD method are brought closer to the airframe forming the EDGE-p-BFFD (edge constraints based p-BFFD) method. For the case in this paper, the proposed EDGE-p-BFFD method not only has fairly high parameterisation accuracy, but also reduces the expression error from 1.01E-3 to 1.25E-4, which is nearly ten times. It can also achieve effective lifting body guideline constraints, and has the ability of local deformation adapting to the configuration characteristics. In terms of the proportion of effective control points, the EDGE-p-BFFD method increases the proportion of effective control points from 36.7% to 50%, and the more control points, the more obvious the proportion increase effect. The new method also has better effect on the continuity of geometric deformation. At the same time, this paper introduces the independent deformation method of the upper and lower surfaces based on the double control body frames, which effectively avoids the deformation coupling problem of the simultaneous change of the upper and lower surfaces caused by the movement of control points in the traditional single control framework.

The apicomplexan parasite Cyclospora cayetanensis causes seasonal foodborne outbreaks of the gastrointestinal illness cyclosporiasis. Prior to the coronavirus disease-2019 pandemic, annually reported cases were increasing in the USA, leading the US Centers for Disease Control and Prevention to develop a genotyping tool to complement cyclosporiasis outbreak investigations. Thousands of US isolates and 1 from China (strain CHN_HEN01) were genotyped by Illumina amplicon sequencing, revealing 2 lineages (A and B). The allelic composition of isolates was examined at each locus. Two nuclear loci (CDS3 and 360i2) distinguished lineages A and B. CDS3 had 2 major alleles: 1 almost exclusive to lineage A and the other to lineage B. Six 360i2 alleles were observed – 2 exclusive to lineage A (alleles A1 and A2), 2 to lineage B (B1 and B2) and 1 (B4) was exclusive to CHN_HEN01 which shared allele B3 with lineage B. Examination of heterozygous genotypes revealed that mixtures of A- and B-type 360i2 alleles occurred rarely, suggesting a lack of gene flow between lineages. Phylogenetic analysis of loci from whole-genome shotgun sequences, mitochondrial and apicoplast genomes, revealed that CHN_HEN01 represents a distinct lineage (C). Retrospective examination of epidemiologic data revealed associations between lineage and the geographical distribution of US infections plus strong temporal associations. Given the multiple lines of evidence for speciation within human-infecting Cyclospora, we provide an updated taxonomic description of C. cayetanensis, and describe 2 novel species as aetiological agents of human cyclosporiasis: Cyclospora ashfordi sp. nov. and Cyclospora henanensis sp. nov. (Apicomplexa: Eimeriidae).