Tea can improve the progression of some metabolic diseases through anti-inflammatory and antioxidant effects, but its impact on non-alcoholic fatty liver disease (NAFLD) is still controversial. The aim of this paper is to identify the relationship between tea and NAFLD by Mendelian randomisation (MR) and complete clinical validation using National Health and Nutrition Examination Survey (NHANES) database. MR used data from Genome Wide Association Study, with inverse-variance weighted (IVW) as principal analytical methods. The reliability of the results was verified by a series of sensitivity and heterogeneity tests. Subsequently, clinical validation was conducted using NHANES (2005–2018), involving 22 257 participants, grouped by the type of tea. Green tea drinkers were categorised into four groups (Q1–Q4) by quartiles of green tea intake, from lowest to highest (similar for black tea drinkers and other tea drinkers). Models were constructed by logistic regression to estimate the role of tea consumption (Q1–4) on NAFLD. Finally, using fibrosis-4 index (FIB-4) to evaluate the severity of hepatic fibrosis, the effect of tea consumption (Q1–4) on the degree of hepatic fibrosis was investigated by linear regression. IVW method (OR = 0·43, 95 % CI: 0·21, 0·85, P = 0·01) and weighted median method (OR = 0·35, 95 % CI: 0·14, 0·91, P = 0·03) revealed there was a causal relationship between tea and NAFLD. An array of sensitivity analyses validated the reliability of results. Analysis of NHANES indicated tea drinker present a slightly lower prevalence of NAFLD than non-tea drinker (green tea drinkers: 47·6 %, black tea drinkers: 46·3 %, other tea drinker: 43·2 %, non-tea drinkers: 48·1 %, P < 0·05). After adjusting for confounders, compared with the lowest black tea consumption (Q1), the population with the highest black tea consumption (Q4) was independently related to lower presence of NAFLD (Q4: OR = 0·69, 95 % CI: 0·50, 0·93, P < 0·05), such association remained stable in the overweight subgroup. As further analysed, Q4 also displayed a significant negative correlation with the level of hepatic fibrosis in patients with NAFLD (β = –0·073, 95 % CI: –0·126, −0·020, P < 0·01).Tea reduces the morbidity of NAFLD and ameliorates hepatic fibrosis degree in those already suffering from the disease.

Few studies have evaluated the joint effect of trace elements on spontaneous preterm birth (SPTB). This study aimed to examine the relationships between the individual or mixed maternal serum concentrations of Fe, Cu, Zn, Se, Sr and Mo during pregnancy, and risk of SPTB. Inductively coupled plasma MS was employed to determine maternal serum concentrations of the six trace elements in 192 cases with SPTB and 282 controls with full-term delivery. Multivariate logistic regression, weighted quantile sum regression (WQSR) and Bayesian kernel machine regression (BKMR) were used to evaluate the individual and joint effects of trace elements on SPTB. The median concentrations of Sr and Mo were significantly higher in controls than in SPTB group (P < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted OR (aOR) of 0·432 (95 CI < 0·05). In multivariate logistic regression analysis, compared with the lowest quartile levels of individual trace elements, the third- and fourth-quartile Sr or Mo concentrations were significantly associated with reduced risk of SPTB with adjusted aOR of 0·432 (95 % CI 0·247, 0·756), 0·386 (95 % CI 0·213, 0·701), 0·512 (95 % CI 0·297, 0·883) and 0·559 (95 % CI 0·321, 0·972), respectively. WQSR revealed the inverse combined effect of the trace elements mixture on SPTB (aOR = 0·368, 95 % CI 0·228, 0·593). BKMR analysis confirmed the overall mixture of the trace elements was inversely associated with the risk of SPTB, and the independent effect of Sr and Mo was significant. Our findings suggest that the risk of SPTB decreased with concentrations of the six trace elements, with Sr and Mo being the major contributors.

Dietary habits have been implicated in the development and severity of non-alcoholic fatty liver disease (NAFLD). Several epidemiological studies attempted to assess the relationship between food groups and the likelihood of NAFLD, but these results were conflicting. The present meta-analysis was conducted to assess the association between food groups and the likelihood of NAFLD. Published literature was retrieved and screened from MEDLINE, Embase and Web of Science. Out of 7892 retrieved articles, twenty-four observational studies (fifteen cross-sectional studies and nine case–control studies) met our eligibility criteria and were finally included in this systematic review and meta-analysis. Consumption of both red meat and soft drinks contributed to a positive association with NAFLD. Inversely, nut consumption was negatively associated with NAFLD. There were no significant influences on the likelihood of NAFLD about consuming whole grains, refined grains, fish, fruits, vegetables, eggs, dairy products and legumes. This meta-analysis suggests that individuals who consumed more red meat and soft drinks may have a significantly increased likelihood of NAFLD, whereas higher nut intake may be negatively associated with NAFLD. Further prospective studies are required to assess the association between food patterns and NAFLD.

The synergetic effects of surface smoothing exhibited during the inductively coupled plasma reactive ion etching (ICP-RIE) of free-standing polycrystalline diamonds (PCDs) were investigated. Changing the assistive gas types generated variable surface oxidation states and chemical environments that resulted in different etching rates and surface morphologies. The main reaction bond mechanism (C–O) during ICP-RIE and the ratio of C–O–C/O–C=O associated with the existence of a uniform smooth surface with root mean square (RMS) roughness of 2.36 nm were observed. An optimal process for PCD smoothing at high etching rate (4.6 μm/min) was achieved as follows: 10% gas additions of CHF3 in O2 plasma at radio frequency power of 400 W. The further etched ultra-smooth surface with RMS roughness <0.5 nm at etching rate of 0.23 μm/min that being produced by transferring this optimum recipe on single crystal diamonds with surface patterns confirmed the effectiveness of the fast smoothing approach and its feasibility for diamond surface patterning.

We use apatite fission track ages from sediments recovered by the International Ocean Discovery Program in the Laxmi Basin, Arabian Sea, to constrain exhumation rates in the western Himalaya and Karakoram since 15.5 Ma. With the exception of a Triassic population in the youngest 0.93 Ma samples supplied from western Peninsular India, apatite fission track ages are overwhelmingly Cenozoic, largely <25 Ma, consistent with both a Himalaya–Karakoram source and rapid erosion. Comparison of the minimum cooling age of each sample with depositional age (lag time) indicates an acceleration in exhumation between 7.8 and 7.0 Ma, with lag times shortening from ∼6.0 Myr at 8.5–7.8 Ma to being within error of zero between 7.0 and 5.7 Ma. Sediment supply at 7.0–5.7 Ma was largely from the Karakoram, and to a lesser extent the Himalaya, based on U–Pb zircon ages from the same samples. This time coincides with a period of drying in the Himalayan foreland caused by weaker summer monsoons and Westerly winds. It also correlates with a shift of erosion away from the Karakoram, Kohistan and the Tethyan Himalaya towards more erosion of the Lesser and Greater Himalaya and Nanga Parbat, as shown by zircon U–Pb provenance data, and especially after 5.7 Ma based on Nd isotope data. Samples younger than 5.7 Ma have lag times of ∼4.5 Myr, similar to Holocene Indus delta sediments.

Clay minerals from the Indus Canyon and eastern clinoform since ~12 ka are uniformly rich in smectite and illite, similar to those from the Holocene Indus flood plains. A systematic enrichment of smectite in the proximal delta compared to the canyon and eastern clinoform argues for preferential capture of smectite close to the river mouth since ~12 ka. There is a rapid shift to a more smectite-rich assemblage in the canyon and eastern clinoform after ~5 ka. This change is probably caused by a change in sediment source, with less direct flux from the Himalaya and more erosion of older, weathered, smectite-rich sediment from the Indus River flood plains, driven by incision of the Indus and its tributaries into the floodplain as summer monsoon rains weakened. This influx of smectite is consistent with lower kaolinite/smectite values since ~5 ka. The onset of large-scale agricultural activities since ~5 ka, especially starting with the Harappan Civilization, may also have enhanced incision and erosion of floodplain sediments over the same time period. This study reports for the first time how monsoon strength variations since ~12 ka affected the clay mineral assemblages and sediment provenance in a major submarine canyon.

Critically ill patients frequently suffer from gastrointestinal dysfunction as the intestine is a vulnerable organ. In critically ill patients who require nutritional support, the current guidelines recommend the use of enteral nutrition within 24–48 h and advancing towards optimal nutritional goals over the next 48–72 h; however, this may be contraindicated in patients with acute gastrointestinal injury because overuse of the gut in the acute phase of critical illness may have an adverse effect on the prognosis. We propose that trophic feeding after 72 h, as a partial gut rest strategy, should be provided to critically ill patients during the acute phase of illness as an organ-protective strategy, especially for those with acute gastrointestinal injury.

In this study, a three-phased multiwalled scaffold, composed of carbon nanotube (mwCNT), nanocrystalline hydroxyapatite (nHA), and polycaprolactone (PCL), was fabricated by the solvent evaporation technique. The structure character, mechanical properties, and degradation activity in simulated body fluid (SBF), along with osteoproductive ability in human osteosarcoma cell MG63, were investigated thoroughly. Results showed that the three phases in mwCNT/nHA/PCL composite presented excellent miscibility and stronger interfacial force when the weight content was 1/15/84 (wt%). Simultaneously, the composite had smaller porosity and slower degradation rate, and there was massive crystallized hydroxyapatite formed on the surface after being soaked in SBF. With regard to bioactivity, MG63s on this scaffolds presented good proliferation performance and differentiated into the osteogenic lineage by expressing high levels of ALP. It was concluded that mwCNTs/nHA/PCL composite scaffolds might be beneficial for bone tissue engineering at a relatively low concentration of mwCNTs and nHA.

The microstructure evolution of a typical nickel-based superalloy was studied in the strain range of 0.1–0.9 at 1110 °C/0.01 s−1 by using the electron backscattered diffraction technique. It was found that the evolution of recrystallized microstructures, grain boundary characteristics, and textures was closely related to strain level. With the increasing strain level, the fraction of equiaxed dynamic recrystallization (DRX) grains increased significantly at the expense of the large non-recrystallized grains, and there was a decrease in total low angle grain boundaries fraction and a simultaneous increase in the fraction of high angle grain boundaries. In addition, the occurrence of DRX promoted the formation of Σ3 boundaries, and the coherent Σ3 boundaries were much easier to form at the strain above 0.5. On the other hand, 〈100〉 component of the textures became stronger with the increasing strains, and the lack of 〈111〉 orientations can also be observed in the textures at high strains above 0.7.

Owing to the development of new technologies, the epigenome, a second dimensional method for genome analysis has emerged. Epigenetic mechanisms, including DNA methylation, histone modifications and noncoding RNAs, regulate gene expression without changing the genetic sequence. These epigenetic mechanisms normally modulate gene expression, trans-generational effects and inherited expression states in various biological processes. Abnormal epigenetic patterns typically cause pathological conditions, including cancers, age-related diseases, and specific cartilage and bone diseases. Facing the rapidly developing epigenetic field, we reviewed epigenetic mechanisms and their involvement with the skeletal system and their role in skeletal development, homeostasis and degeneration. Finally, we discuss the prospects for the future of epigenetics.

The TiO2 hollow spheres (TiO2HS) were successfully prepared by a hydrothermal method and added to Vulcan XC-72 carbon black as the support materials for Pd nanoparticles. A facile approach to promote ethylene glycol (EG) electrooxidation in alkaline medium was carried out by the PdBi/TiO2HS-C catalyst. The results show that Pd and Bi nanoparticles are uniformly dispersed on the surface of carbon-doped TiO2 hollow spheres, the appropriate amount of Bi modification into Pd/TiO2HS-C catalyst can enhance remarkably the electrocatalytic activity for EG oxidation, in which the PdBi/TiO2HS-C (Pd:Bi = 1:0.1) catalyst exhibits excellent stability. The high electrochemical performance is attributed to the unique structure and high surface area of the TiO2HS, metal nanoparticles uniform distribution, the electronic effect between Pd and Bi as well as the bifunctional effect between metal nanoparticles and the support TiO2HS-C. The results obtained are significant for the development of new Pd-based TiO2HS-C electrocatalysts for alcohol fuel cells.

In this study, the mechanism of ferrite grain refinement during warm compression deformation in the (γ + α) region of Cu–P–Cr–Ni–Mo weathering steel was analyzed by optical microscopy and electron backscatter diffraction. Results showed that fine equiaxed ferrite grains surrounded by high-angle boundaries (HABs) formed along the initial boundaries as the strain is increased. As the deformation temperature decreased, some low-angle boundaries shifted to HABs in intragranular ferrite, and ferrite grain refinement was promoted by continuous dynamic recrystallization. Microstructural observations also indicated that the fine ferrite grains of approximately 1.4–3 μm in size can be obtained by deformation at 750 °C with a strain over 0.69 because of ferrite dynamic recrystallization. Moreover, both strain and deformation temperature influenced the ferrite grain size and volume fraction. Thus, the predominant mechanism for ferrite grain refinement in the (γ + α) region was continuous dynamic recrystallization.

Magnesium aluminate (MgAl2O4) spinel nanoparticles with an average crystalline size of 35 nm were synthesized by polymer-gel and isolation-medium-assisted calcination. In the process, a large excess of MgO, 40 times the stoichiometric amount of spinel, is added to the precursor mixture to separate the spinel particles as they are nucleated to prevent their agglomeration and coarsening during calcination. Well-dispersed MgAl2O4 nanoparticles with a single-crystal structure were obtained after acid washing of calcined product. The microstructures of the as-prepared samples were characterized by differential thermal and thermogravimetric analysis, x-ray diffractometry, Fourier transform infrared spectroscopy, nitrogen adsorption–desorption isotherms, scanning electron microscopy, energy-dispersive x-ray spectroscopy, and transmission electron microscopy. The results indicate that MgO acting as the isolation medium is effective in preventing the agglomeration of MgAl2O4 nanoparticles, and it also prevents their contamination by introducing an isolation medium during the preparation process. The nanopowder was sintered up to 95% of the theoretical density but with parallel grain growth.