A comprehensive, Wisconsin state-wide assessment of waterhemp response to a diverse group of herbicide sites of action has not been conducted. Our objective was to characterize the response of a state-wide collection of waterhemp accessions to postemergence (POST) and preemergence (PRE) herbicides commonly used in corn and soybean in Wisconsin. Greenhouse experiments were conducted with more than 80 accessions from 27 counties. POST treatments included 2,4-D, atrazine, dicamba, fomesafen, glufosinate, glyphosate, imazethapyr, and mesotrione at 1× and 3× label rates. PRE treatments included atrazine, fomesafen, mesotrione, metribuzin, and S-metolachlor at 0.5×, 1×, and 3× label rates. Ninety-eight percent and 88% of the accessions exhibited ≥50% plant survival after exposure to imazethapyr and glyphosate POST 3× rate, respectively. Seventeen percent, 16%, and 3% of the accessions exhibited ≥50% plant survival after exposure to 2,4-D, atrazine, and dicamba, respectively, applied POST at the 1× rate. Survival of all accessions was ≤25% after exposure to 2,4-D or dicamba applied POST at the 3× rate, or glufosinate, fomesafen, and mesotrione applied POST at either rate evaluated. No plant of any accession survived exposure to glufosinate at either rate. Forty-five percent and 3% of the accessions exhibited <90% plant density reduction after exposure to atrazine applied PRE at the 3× rate and fomesafen PRE at the 1× rate, respectively. Plant density reduction of all accessions was ≥96% after exposure to fomesafen applied PRE at the 3× rate, or metribuzin, S-metolachlor, and mesotrione applied PRE at the 1× rate. Our results suggest that waterhemp resistance to imazethapyr and glyphosate applied POST is widespread in Wisconsin, whereas resistance to 2,4-D, atrazine, and dicamba applied POST is present to a lower extent. One accession (A75, Fond du Lac County) exhibited multiple resistance to imazethapyr, atrazine, glyphosate, and 2,4-D when applied POST. Overall, atrazine applied PRE was ineffective for waterhemp control in Wisconsin. Proactive resistance management and the use of effective PRE and POST herbicides are fundamental for waterhemp management in Wisconsin.

Horseweed is a North American indigenous plant species commonly found in Nebraska cropping systems. Horseweed management is challenging because of horseweed’s prolific seed production, long-distance seed dispersal via wind, competitiveness, and rapid evolution of herbicide resistance. Understanding the horseweed emergence pattern across Nebraska can contribute to implementing effective and more sustainable tactics to minimize its impact on cropping systems. Field studies were conducted during fall and spring from 2016 to 2018 in Lincoln (corn and soybean), North Platte (wheat stubble and soybean), and Scottsbluff (corn and fallow) to investigate the emergence pattern of horseweed accessions from Lincoln, North Platte, and Scottsbluff, NE. Results show that most horseweed seedling emergence occurred in fall (99%) and only a few seedlings emerged in spring across locations, except in the wheat stubble experiment at North Platte, where higher spring emergence was detected (3% to 22%). In four out of six experiments, the density of total emerged seedlings of each accession was greatest when established in their site of origin. Our results suggest that late fall and/or early spring is likely the best timing for horseweed management across Nebraska.

The continued dispersal of Palmer amaranth can impose detrimental impacts on cropping systems in Wisconsin. Our objective was to characterize the response of a recently introduced Palmer amaranth accession in southern Wisconsin to postemergence (POST) and preemergence (PRE) herbicides commonly used in corn and soybean. Greenhouse experiments were conducted with the Wisconsin putative herbicide-resistant accession (BRO) and two additional control accessions from Nebraska, a glyphosate-resistant (KEI2) and a glyphosate-susceptible (KEI3) accession. POST treatments were 2,4-D, atrazine, dicamba, glufosinate, glyphosate, imazethapyr, lactofen, and mesotrione at 1X and 3X label rates. PRE treatments were atrazine, mesotrione, metribuzin, S-metolachlor, and sulfentrazone at 0.5X, 1X, and 3X label rates. Plant survival of each accession was ≥63% after exposure to imazethapyr POST 3X rate. Survival of BRO and KEI2 was 44% (±13) and 50% (±13), respectively, after exposure to atrazine POST 3X rate. Survival of BRO was 69% (±12) after exposure to glyphosate POST 1X rate, whereas survival of KEI2 was 44% (±13) after exposure to glyphosate POST 3X rate. After exposure to 2,4-D POST 1X rate, KEI2 and KEI3 survival was 38% (±13) and 50% (±13), respectively. Survival of all accessions was ≤31% after exposure to 2,4-D POST 3X rate or dicamba, glufosinate, lactofen, and mesotrione POST at either rate. Plant density reduction of KEI2 was 77% (±13) after exposure to atrazine PRE 1X rate, whereas density reduction of BRO was 56% (±13) after exposure to atrazine PRE 3X rate. Plant density reduction of all accessions was ≥94% after exposure to mesotrione PRE 1X and 3X rates or metribuzin, S-metolachlor, and sulfentrazone PRE at either rate. Our results suggest that each accession is resistant (≥50% survival) to imazethapyr POST, that BRO and KEI2 are resistant to atrazine and glyphosate POST, and that KEI2 and KEI3 are resistant to 2,4-D POST. The recently introduced BRO accession exhibited multiple resistance to imazethapyr, atrazine, and glyphosate POST. In addition, atrazine PRE was ineffective for BRO control, suggesting that diversified resistance management strategies will be critical for its effective management.

Recent legalization of industrial hemp in the United States has led to increased interest among stakeholders to produce hemp for grain and fiber. However, owing to the lack of herbicides registered for use in hemp, producers are left with limited weed management strategies. Moreover, much of the agricultural land that could be used to cultivate industrial hemp may be prone to carryover of previously applied residual herbicides or physical drift from herbicides sprayed nearby. Industrial hemp sensitivity to herbicides is not well documented. Dose–response studies were conducted under controlled conditions in Madison, WI, screening two industrial hemp grain cultivars for tolerance to 44 preemergence and postemergence herbicides commonly used in corn and soybean. Treatments consisted of herbicides applied at 0×, 0.125×, 0.25×, 0.50×, 0.75×, 1×, 2×, and 4× the recommended maximum labeled rates based on soil type. Preemergence applications were delivered immediately after planting, whereas postemergence applications took place when hemp plants reached 5 to 10 cm in height. Nontreated plants served as the control and were used to estimate percent biomass reduction; dose–response curves were generated. Biomass reduction was >50% for rates under the suggested label rate for 23 preemergence and 21 postemergence herbicides tested. All herbicides tested resulted in >25% biomass reduction at the 0.125× rate, except for clopyralid applied preemergence and postemergence and saflufenacil applied preemergence. This is concerning, as the label rates are determined for effective weed control and the mitigation of herbicide resistance. Overall, these results indicate that industrial hemp is very sensitive to most herbicides tested. Growers should consider herbicide use history and surrounding crops when determining industrial hemp field selection to prevent significant plant injury due to herbicide carryover and drift. Further research into alternative methods of weed control will be vital to establishing hemp as a dominant crop once again.

Enlist E3TM soybean cultivars permit over-the-top application of labeled glyphosate, glufosinate, and 2,4-D choline products. Increased Enlist E3TM trait adoption and use of 2,4-D choline postemergence across U.S. soybean production systems raise concerns regarding potential for 2,4-D off-target movement (OTM). A large-scale drift experiment was established near Sun Prairie, WI, and Arlington, WI, in 2019 and 2020, respectively. A 2,4-D-resistant soybean cultivar was planted in the center of the field (∼3 ha), while the surrounding area was planted with a 2,4-D-susceptible cultivar. An application of 785 ae ha−1 2,4-D choline plus 834 g ae ha−1 glyphosate was completed within the center block at R2 and V6 growth stages on August 1, 2019, and July 3, 2020, respectively. Filter papers were placed in-swath and outside of the treated area in one upwind transect and three downwind transects to estimate particle deposition. Low-volume air samplers ran for the 0.5-h to 48-h period following application to estimate 2,4-D air concentration. Injury to 2,4-D-susceptible soybean was assessed 21 d after treatment (0% to 100% injury). The 2,4-D deposition in-swath was 9,966 and 5,727 ng cm−2 in 2019 and 2020, respectively. Three-parameter log-logistic models estimated the distance to 90% reduction in 2,4-D deposition (D90) to be 0.63 m and 0.90 m in 2019 and 2020, respectively. In 2020, the 2,4-D air concentration detected was lower for the upwind (0.395 ng m−3) than the downwind direction (1.34 ng m−3), although both were lower than the amount detected in-swath (4.01 ng m−3). No soybean injury was observed in the downwind or upwind directions. Our results suggest that 2,4-D choline applications following label recommendations pose little risk to 2,4-D-susceptible soybean cultivars; however, further work is needed to understand 2,4-D choline OTM under different environmental conditions and the presence of other susceptible crops.

Amid widespread occurrence of herbicide-resistant weeds in the United States, the use of PRE herbicides and cover crops have resurged once again as important strategies for weed management in cropping systems. The objective of this experiment was to evaluate the length of soil residual weed control from PRE soybean herbicides and the detrimental impact of these herbicides on cover crop species using field treated soil in greenhouse bioassays. Greenhouse bioassays were conducted using soil from field experiments conducted in 2018 and 2019 in Arlington and Lancaster, WI. PRE herbicides consisted of imazethapyr, chlorimuron-ethyl, and cloransulam-methyl (acetolactate synthase [ALS] inhibitors); metribuzin (photosystem II [PS II] inhibitor); sulfentrazone, flumioxazin, and saflufenacil (protoporphyrinogen oxidase [PPO] inhibitors); acetochlor, S-metolachlor, dimethenamid-P, and pyroxasulfone (very long-chain fatty acid [VLCFA] inhibitors); and a nontreated control. Greenhouse bioassays were conducted using soil (depth, 0 to 10 cm) sampled at 0, 10, 20, 30, 40, and 50 d after treatment (DAT). Palmer amaranth and giant foxtail (weeds), and radish and cereal rye (cover crops) were used as bioindicators of herbicide levels in the soil. Bioassay results showed extended soil residual control of Palmer amaranth with sulfentrazone and pyroxasulfone; extended residual control of giant foxtail was observed with pyroxasulfone and S-metolachlor. Chlorimuron-ethyl and metribuzin were the most injurious herbicides to radish and cereal rye shortly after application, respectively, but minimal injury was observed from soil samples collected 50 DAT, indicating the use of PRE and fall-seeded cover crops in southern Wisconsin can be compatible. These results can support growers and practitioners with selection of effective PRE herbicides for Palmer amaranth and giant foxtail control and reduced impact on fall-seeded radish and cereal rye cover crops, altogether leading to more effective, diverse, and sustainable weed management programs.

A stakeholder survey was conducted from April through June of 2018 to understand stakeholders’ perceptions and challenges about cropping systems and weed management in Brazil. The dominant crops managed by survey respondents were soybean (73%) and corn (66%). Approximately 75% of survey respondents have grown or managed annual cropping systems with two to three crops per year cultivated in succession. Eighteen percent of respondents manage only irrigated cropping systems, and over 60% of respondents adopt no-till as a standard practice. According to respondents, the top five troublesome weed species in Brazilian cropping systems are horseweed (asthmaweed, Canadian horseweed, and tall fleabane), sourgrass, morningglory, goosegrass, and dayflower (Asiatic dayflower and Benghal dayflower). Among the nine species documented to have evolved resistance to glyphosate in Brazil, horseweed and sourgrass were reported as the most concerning weeds. Other than glyphosate, 31% and 78% of respondents, respectively, manage weeds resistant to acetyl-CoA carboxylase (ACCase) inhibitors and/or acetolactate synthase (ALS) inhibitors. Besides herbicides, 45% of respondents use mechanical, and 75% use cultural (e.g., no-till, crop rotation/succession) weed control strategies. Sixty-one percent of survey respondents adopt cover crops to some extent to suppress weeds and improve soil chemical and physical properties. Nearly 60% of survey respondents intend to adopt the crops that are resistant to dicamba or 2,4-D when available. Results may help practitioners, academics, industry, and policy makers to better understand the bad and the good of current cropping systems and weed management practices adopted in Brazil, and to adjust research, education, technologies priorities, and needs moving forward.

Use of synthetic auxin herbicides has increased across the midwestern United States after adoption of synthetic auxin-resistant soybean traits, in addition to extensive use of these herbicides in corn. Off-target movement of synthetic auxin herbicides such as dicamba can lead to severe injury to sensitive plants nearby. Previous research has documented effects of glyphosate on spray-solution pH and volatility of several dicamba formulations, but our understanding of the relationships between glyphosate and dicamba formulations commonly used in corn and for 2,4-D remains limited. The objectives of this research were to (1) investigate the roles of synthetic auxin herbicide formulation, glyphosate, and spray additives on spray solution pH; (2) assess the impact of synthetic auxin herbicide rate on solution pH; and (3) assess the influence of glyphosate and application time of year on dicamba and 2,4-D volatility using soybean as bioindicators in low-tunnel field volatility experiments. Addition of glyphosate to a synthetic auxin herbicide decreased solution pH below 5.0 for four of the seven herbicides tested (range of initial pH of water source, 7.45–7.70). Solution pH of most treatments was lower at a higher application rate (4× the labeled POST rate) than the 1× rate. Among all treatment factors, inclusion of glyphosate was the most important affecting spray solution pH; however, the addition of glyphosate did not influence area under the injury over distance stairs (P = 0.366) in low-tunnel field volatility experiments. Greater soybean injury in field experiments was associated with high air temperatures (maximum, >29 C) and low wind speeds (mean, 0.3–1.5 m s−1) during the 48 h after treatment application. The two dicamba formulations (diglycolamine with VaporGrip® and sodium salts) resulted in similar levels of soybean injury for applications that occurred later in the growing season. Greater soybean injury was observed after dicamba than after 2,4-D treatments.

Failure to control Palmer amaranth with glyphosate and protoporphyrinogen IX oxidase (PPO)-inhibitor herbicides was reported across southwestern Nebraska in 2017. The objectives of this study were to 1) confirm and 2) validate glyphosate and PPO-inhibitor (fomesafen and lactofen) resistance in 51 Palmer amaranth accessions from southwestern Nebraska using genotypic and whole-plant phenotypic assay correlations and cluster analysis, and 3) determine which agronomic practices might be influencing glyphosate resistance in Palmer amaranth accessions in that location. Based on genotypic assay, 88% of 51 accessions contained at least one individual with amplification (>2 copies) of the 5-enolypyruvyl-shikimate-3-phosphate synthase (EPSPS) gene, which confers glyphosate resistance; and/or a mutation in the PPX2 gene, either ΔG210 or R128G, which endows PPO-inhibitor resistance in Palmer amaranth. Cluster analysis and high correlation (0.83) between genotypic and phenotypic assays demonstrated that EPSPS gene amplification is the main glyphosate resistance mechanism in Palmer amaranth accessions from southwestern Nebraska. In contrast, there was poor association between genotypic and phenotypic responses for PPO-inhibitor resistance, which was attributed to segregation for PPO-inhibitor resistance within these accessions and/or the methodology that was adopted herein. Genotypic assays can expedite the process of confirming known glyphosate and PPO-inhibitor resistance mechanisms in Palmer amaranth from southwestern Nebraska and other locations. Phenotypic assays are also a robust method for confirming glyphosate resistance but not necessarily PPO-inhibitor resistance in Palmer amaranth. Moreover, random forest analysis of glyphosate resistance in Palmer amaranth indicated that EPSPS gene amplification, county, and current and previous crops are the main factors influencing glyphosate resistance within that geographic area. Most glyphosate-susceptible Palmer amaranth accessions were found in a few counties in areas with high crop diversity. Results presented here confirm the spread of glyphosate resistance and PPO-inhibitor resistance in Palmer amaranth accessions from southwestern Nebraska and demonstrate that less diverse cropping systems are an important driver of herbicide resistance evolution in Palmer amaranth.

Six experiments were conducted in 2018 on field sites located in Arkansas, Indiana, Michigan, Nebraska, Ontario, and Wisconsin to evaluate the off-target movement (OTM) of dicamba under field-scale conditions. The highest estimated percentages of dicamba injury in non–dicamba-resistant (DR) soybean were 55%, 44%, 39%, 67%, 15%, and 44% injury for noncovered areas and 55%, 5%, 13%, 42%, 0%, and 41% injury for covered areas during dicamba application in Arkansas, Indiana, Michigan, Nebraska, Ontario, and Wisconsin, respectively. The level of injury generally decreased as the downwind distance increased under covered and noncovered areas at all sites. There was an estimated 10% injury in non-DR soybean at 113, 8, 11, 8, and 8 m; and estimated 1% injury at 293, 28, 71, 15, and 19 m from the edge of treated fields downwind when plants were not covered during dicamba application in Arkansas, Indiana, Michigan, Ontario, and Wisconsin, respectively. Assessment of filter-paper collectors placed from 4 to 137 m downwind from the edge of the sprayed area suggested the dicamba deposition reduced exponentially with distance. The greatest injury to non-DR soybean from dicamba OTM occurred at Nebraska and Arkansas (as far as 250 m). Non-DR soybean injury was greatest adjacent to the dicamba sprayed area, but injury decreased with no injury beyond 20 m downwind or in any other direction from the dicamba sprayed area in Indiana, Michigan, Ontario, and Wisconsin. The presence of soybean injury under covered and noncovered areas during the spray period for primary drift suggests that secondary movement of dicamba was evident at five sites. Additional research is needed to determine the exact forms of secondary movement of dicamba under different environmental conditions.

Widespread and repeated use of glyphosate resulted in an increase in glyphosate-resistant (GR) weeds. This led to an urgent need for diversification of weed control programs and use of PRE herbicides with alternative sites of action. Field experiments were conducted over a 4-yr period (2015 to 2018) across three locations in Nebraska to evaluate the effects of PRE-applied herbicides on critical time for weed removal (CTWR) in GR soybean. The studies were laid out in a split-plot arrangement with herbicide regime as the main plot and weed removal timing as the subplot. The herbicide regimes used were either no PRE or premix of either sulfentrazone plus imazethapyr (350 + 70 g ai ha−1) or saflufenacil plus imazethapyr plus pyroxasulfone (26 + 70 + 120 g ai ha−1). The weed removal timings were at V1, V3, V6, R2, and R5 soybean stages, with weed-free and weedy season-long checks. Weeds were removed by application of glyphosate (1,400 g ae ha−1) or by hoeing. The results across all years and locations suggested that the use of PRE herbicides delayed CTWR in soybean. In particular, the CTWR without PRE herbicides was determined to be around the V1 to V2 (14 to 21 d after emergence [DAE]) growth stage, depending on the location and weed pressure. The use of PRE-applied herbicides delayed CTWR from about the V4 (28 DAE) stage up to the R5 (66 DAE) stage. These results suggest that the use of PRE herbicides in GR soybean could delay the need for POST application of glyphosate by 2 to 5 wk, thereby reducing the need for multiple applications of glyphosate during the growing season. Additionally, the use of PRE herbicides could provide additional modes of action needed to manage GR weeds in GR soybean.

In 2017, dicamba-resistant (DR) soybean was commercially available to farmers in the United States. In August and September of 2017, a survey of 312 farmers from 60 Nebraska soybean-producing counties was conducted during extension field days or online. The objective of this survey was to understand farmers’ adoption and perceptions regarding DR soybean technology in Nebraska. The survey contained 16 questions and was divided in three parts: (1) demographics, (2) dicamba application in DR soybean, and (3) dicamba off-target injury to sensitive soybean cultivars. According to the results, 20% of soybean hectares represented by the survey were planted to DR soybean in 2017, and this number would probably double in 2018. Sixty-five percent of survey respondents own a sprayer and apply their own herbicide programs. More than 90% of respondents who adopted DR soybean technology reported significant improvement in weed control. Nearly 60% of respondents used dicamba alone or glyphosate plus dicamba for POST weed control in DR soybean; the remaining 40% added an additional herbicide with an alternative site of action (SOA) to the POST application. All survey respondents used one of the approved dicamba formulations for application in DR soybean. Survey results indicated that late POST dicamba applications (after late June) were more likely to result in injury to non-DR soybean compared to early POST applications (e.g., May and early June) in 2017. According to respondents, off-target dicamba movement resulted both from applications in DR soybean and dicamba-based herbicides applied in corn. Although 51% of respondents noted dicamba injury on non-DR soybean, 7% of those who noted injury filed an official complaint with the Nebraska Department of Agriculture. Although DR soybean technology allowed farmers to achieve better weed control during 2017 than previous growing seasons, it is apparent that off-target movement and resistance management must be addressed to maintain the viability and effectiveness of the technology in the future.

This study evaluated the effectiveness of 14 herbicide treatments for purple loosestrife (Lythrum salicaria L.) control over a period of 10 yr. The study commenced in 2000/2001 at four wetland locations in Nebraska. The evaluated herbicides included: glyphosate at 2.2 and 3.4 kg ha−1; 2,4-D dimethylamine at 1.4 and 2.8 kg ae ha−1; triclopyr at 1.3 and 2.1 kg ae ha−1; imazapyr at 1.1 and 1.7 kg ae ha−1; metsulfuron at 0.042 and 0.084 ai kg ha−1; fosamine at 13.5 and 22.4 kg ai ha−1; triclopyr at 1.3 kg ae ha−1 plus 2,4-D amine at 1.4 ae kg ha−1; and metsulfuron at 0.042 kg ai ha−1 plus 2,4-D amine at 1.4 kg ae ha−1. Some treatments provided excellent control (90%) that lasted only one season, while others suppressed L. salicaria growth for multiple seasons, depending on the location and the age of L. salicaria stand. Application of higher rates of glyphosate, imazapyr, and metsulfuron consistently provided excellent control (≥90%) of L. salicaria that lasted 360 d after treatment at most locations. Application of fosamine and the lower rate of 2,4-D amine provided the least L. salicaria control at most locations. The older the L. salicaria stand, the more multiple applications of herbicides were needed to completely control L. salicaria. Generally, there were higher percentages of grasses in the 2,4-D-, triclopyr-, and metsulfuron-treated plots compared with higher percentages of broadleaf species in the glyphosate- and imazapyr-treated plots at each location.

Field and greenhouse experiments were conducted in Nebraska to (1) confirm the 4-hydroxyphenylpyruvate dioxygenase (HPPD)-inhibiting resistant-waterhemp biotype (HPPD-RW) by quantifying the resistance levels in dose-response studies, and (2) to evaluate efficacy of PRE-only, POST-only, and PRE followed by POST herbicide programs for control of HPPD-RW in corn. Greenhouse dose-response studies confirmed that the suspected waterhemp biotype in Nebraska has evolved resistance to HPPD-inhibiting herbicides with a 2- to 18-fold resistance depending upon the type of HPPD-inhibiting herbicide being sprayed. Under field conditions, at 56 d after treatment, ≥90% control of the HPPD-RW was achieved with PRE-applied mesotrione/atrazine/S-metolachlor+acetochlor, pyroxasulfone (180 and 270 g ai ha−1), pyroxasulfone/fluthiacet-methyl/atrazine, and pyroxasulfone+saflufenacil+atrazine. Among POST-only herbicide programs, glyphosate, a premix of mesotrione/atrazine tank-mixed with diflufenzopyr/dicamba, or metribuzin, or glufosinate provided ≥92% HPPD-RW control. Herbicide combinations of different effective sites of action in mixtures provided ≥86% HPPD-RW control in PRE followed by POST herbicide programs. It is concluded that the suspected waterhemp biotype is resistant to HPPD-inhibiting herbicides and alternative herbicide programs are available for effective control in corn. The occurrence of HPPD-RW in Nebraska is significant because it limits the effectiveness of HPPD-inhibiting herbicides.