Hybrid procedure of hypoplastic left heart syndrome, comprising ductus arteriosus stenting and bilateral pulmonary artery banding, is a good surgical option for initial palliative procedure for high-risk patients for Norwood procedure. However, ductal stenting may cause retrograde aortic blood flow obstruction. Furthermore, complete removal of stent while performing the Norwood procedure make the operation more difficult. We report a case that overcame these problems using a novel surgical technique.

Mid-aortic syndrome is an uncommon vascular disease characterised by lower thoracic and upper abdominal aorta stenosis and can occur even in neonatal or infant periods. Here, we report an interesting case of a 2-month-old female with diffuse hypoplasia of the lower abdominal aorta and secondary dilated cardiomyopathy. In our patient, her abdominal aortic narrowing spontaneously normalised over time with the administration of consistent and goal-directed heart failure therapy, supporting adequate growth and natural recovery.

This study examines the presence of bacterial contamination on surgical gloves and suggests appropriate measures for an aseptic surgical environment. To prevent glove contamination during surgery, surgeons and assistants should change gloves periodically, and scrub nurses should be careful when opening packages and handing over implants.

A 65-day-old girl presented to the emergency room with lethargy, requiring emergency venoarterial extracorporeal membrane oxygenation for refractory cardiogenic shock. Initially, hypoplastic left heart syndrome was suspected. However, cor triatriatum with a pinpoint opening on the membrane was diagnosed based on a detailed echocardiographic examination. After membrane resection, the left heart size was restored. However, follow-up echocardiography performed 4 months later showed occlusion of both upper pulmonary veins and stenosis in both lower pulmonary veins. Hybrid balloon angioplasty was performed in all pulmonary veins, and stents were inserted into the right upper and lower pulmonary veins. Despite repeated balloon angioplasty, all pulmonary vein stenosis progressed over 6 months and the patient expired while waiting for a heart-lung transplant. Even after successful repair of cor triatriatum, short-term close follow-up is required for detecting the development of pulmonary vein stenosis.

Single photon sources (SPS) are an important building block for realizing quantum technologies for computing, communication, and sensing. For industrialization, electrically controllable color centers acting as SPS are required. We have demonstrated the creation of electrically controllable silicon vacancies (VSis) in the SiC pn junction diode fabricated by proton beam writing (PBW). PBW was successfully used to introduce electrically controllable VSi without degradation of the diode performance. The dependence of the electroluminescence (EL) and photoluminescence (PL) intensities from VSi on H+ fluence revealed that the emission efficiency of EL is less than that of PL. For EL, the supply of carriers (electrons and/or holes) was restricted due to the resistive region around each VSi introduced by PBW. The results suggest that further improvement in the VSi creation process without defects acting as majority carrier removal centers (highly resistive region) and nonradiative centers by optimization of PBW conditions are key points to realize highly sensitive quantum sensors using VSi.

Allicin (AL) regulates the cellular redox, proliferation, viability, and cell cycle of different cells against extracellular-derived stress. This study investigated the effects of allicin treatment on porcine oocyte maturation and developmental competence. Porcine oocytes were cultured in medium supplemented with 0 (control), 0.01, 0.1, 1, 10 or 100 μM AL, respectively, during in vitro maturation (IVM). The rate of polar body emission was higher in the 0.1 AL-treated group (74.5% ± 2.3%) than in the control (68.0% ± 2.6%) (P < 0.1). After parthenogenetic activation, the rates of cleavage and blastocyst formation were significantly higher in the 0.1 AL-treated group than in the control (P < 0.05). The reactive oxygen species level at metaphase II did not significantly differ among all groups. In matured oocytes, the expression of both BAK and CASP3, and BIRC5 was significantly lower and higher, respectively, in the 0.1 AL-treated group than in the control. Similarly, the expression of BMP15 and CCNB1, and the activity of phospho-p44/42 mitogen-activated protein kinase (MAPK), significantly increased. These results indicate that supplementation of oocyte maturation medium with allicin during IVM improves the maturation of oocytes and the subsequent developmental competence of porcine oocytes.

The Drygalski Ice Tongue presents an ~80 km long floating obstacle to alongshore flows in the Victoria Land coastal ocean region of the Western Ross Sea. Here we use oceanographic data from near to the tongue to explore the interplay between the floating glacier and the local currents and stratification. A vessel-based circuit of the glacier, recording ocean temperature and salinity profiles, reveals the southwest corner to be the coldest and most complex in terms of vertical structure. The southwest corner structure beneath the surface warm, salty layer sustains a block of very cold water extending to 200 m depth. In this same location there was a distinct layer at 370 m not seen anywhere else of water at ~−1.93°C. The new observations broadly, but not directly, support the presence of a coherent Victoria Land Coastal Current. The data suggest the northward moving coastal current turns against the Coriolis force and works its way anticlockwise around the glacier, but with leakage beneath the glacier through the highly ‘rippled’ underside, resulting in a spatially heterogeneous supply to the Terra Nova Bay Polynya region – an important location for the formation of high-salinity shelf water.

A quantitative analysis of In concentration in InGaN/GaN multiquantum wells in light-emitting diodes was carried out using high-resolution transmission electron microscopy (HRTEM) and high-angle annual dark-field scanning TEM (HAADF-STEM). The In composition in InGaN was evaluated by the precise measurement of c-lattice parameters in the HRTEM micrographs, which increase with increasing In composition. The reliability of the results was confirmed by high-resolution x-ray diffraction measurements and Rutherford backscattering spectrometry. Quantitative In compositions can, therefore, be determined using HRTEM. We tried to determine the quantitative In compositions in InGaN by analyzing the intensity profiles of the HAADF-STEM images. However, several problems were encountered, such as differences in the thickness of the region observed, carbon contamination, and ion beam damage during specimen preparation. Therefore, relative differences in composition were observed in the HAADF-STEM images.

Genetic factors have been suggested to be one of the determinants of the variation of left ventricular (LV) structure and function. However, the heritability range of LV structure varies across studies and the influence of genetics on LV function is not well established, especially in Asian populations. Study subjects were 1,642 healthy Korean adults from 426 families, consisting of 298 pairs of monozygotic twins, 62 pairs of dizygotic twins, one set of triplets, 567 siblings, and 354 parents. LV structure and function were measured by M-mode and 2D echocardiography, and conventional and tissue Doppler imaging (TDI). Pairwise intra-class correlations for various familial relationships and heritability were estimated for LV structure and function. The heritability of LV mass, LV ejection fraction (LVEF), left atrial volume index, the ratio between early and late diastolic velocity of mitral inflow (E/A ratio), and the ratio between early diastolic velocity of mitral inflow and early diastolic mitral annular velocities (E/Ea ratio) was 0.44, 0.27, 0.44, 0.25, and 0.33, respectively. Bivariate genetic analysis showed that LV structural and functional traits had significant genetic correlations with cardiovascular risk factors. Additive genetic correlation (ρG) of LV mass with body mass index, systolic blood pressure, and high density lipoprotein cholesterol were 0.49, 0.42, and -0.15 respectively. LVEF (ρG = 0.33) and left atrial volume index (ρG = 0.24) also had a significant genetic correlation with systolic blood pressure. These findings support the theory that genetic factors have significant influence on these traits and necessitate further work to identify the specific genes involved.

The liquid phase plasma reduction method has been applied to prepare silver nanoparticles from a solution of silver nitrate (AgNO3) using a bipolar pulsed electrical discharge system. The excited states of atomic silver, hydrogen and oxygen as well as the molecular bands of hydroxyl radicals were detected in the emission spectra. As the discharge duration increased up to 10 min, silver particle peaks produced by surface plasmon absorption were observed around 430 nm. Both the particle size and the particle numbers were observed to increase with the length of the plasma treatment time and with the initial AgNO3 concentration. Spherical nanoparticles of about 5–20 nm in size were obtained with the discharging time of 5 min, whereas aggregates of nanoparticles of about 10–50 nm in size were mainly produced with the discharging time of 20 min. The cationic surfactant of cetyltrimethylammonium bromide (CTAB) added with the CTAB/AgNO3 molar ratio of 30% was shown to inhibit nanoparticle aggregation.

The oxidation behavior of Cu50Zr50 and Cu46Zr46Al8 glasses during continuous heating up to 1073 K has been investigated, with special emphasis on the oxidation resistance in the supercooled liquid (SCL) state. For Cu50Zr50, the oxide layer mostly consists of monoclinic ZrO2 (m-ZrO2), while for Cu46Zr46Al8, the oxide layer consists of two different layers: an outer layer consisting of tetragonal ZrO2 (t-ZrO2) + Al2O3 + metallic Cu (oxidation product from the SCL state of the glass matrix) and inner layer comprised of m-ZrO2 + metallic Cu islands (oxidation product from the crystallized matrix). Cu-enriched regions consisting of Cu51Zr14 (in Cu50Zr50) or AlCu2Zr + Cu70Zr15Al15 + Cu51Zr14 (in Cu46Zr46Al8) are present below the oxide layer. The present study shows that the addition of Al (8 at.%) in Cu50Zr50 results in a significant deterioration of the oxidation resistance in the SCL state since the solutionizing of Al in t-ZrO2 leads to a higher oxygen ion vacancy concentration, thus providing a higher activity of oxygen ions.

We report the microstructures and dielectric properties of Ca1-xSrxCu3Ti4O12 (C1-xSxCTO, 0≤x≤1) ceramics sintered at the various sintering temperatures ranging from 1000 to 1060˚C in air. The linear increase in lattice parameter in C1-xSxCTO (0≤x≤1) ceramics is observable for the full range of substitution. However, the second phases of SrTiO3 and CuO start to occur from the composition of x=0.8, implying that a stoichiometric SrCu3Ti4O12 (SCTO) compound may not exist. While the C0.6S0.4CTO and C0.4S0.6CTiO samples exhibit relatively lower dielectric constant (εr) of ∼40,000 below 1 kHz, the CaCu3Ti4O12 (CCTO) and SCTO show the extremely high εr values of ~120,000 and ∼180,000, respectively. Complex impedance (Z*) and modulus (M*) spectroscopy revealed that the capacitance (C) and resistivity (ρ) values of grain boundary in all samples are much higher than those of grains.

We report a significant improvement in the electrical properties of CaCu3Ti4O12 (CCTO) dielectrics by the BaTiO3 (BTO) additive. The addition of BTO to CCTO was performed using two different methods of a solid-state mixing and a sol-gel coating. Compared with pure CCTO ceramics (εr ∼ 52,000 and tanδ ∼ 0.38 at 100 kHz), BTO-added CCTO samples commonly showed a large improvement in the dielectric loss property although their dielectric constants were depressed around one order of magnitude; εr ∼ 5900 and tanδ ∼0.05 for 5 mol% BTO-coated CCTO sample and εr ∼ 4,075 and tanδ ∼ 0.02 for 5 mol% BTO-mixed CCTO sample. In addition, BTO-coated CCTO samples showed relatively lower leakage current than those of BTO-mixed CCTO samples, implying that the sol-gel coating is more effective for improving the electrical properties of CCTO.

We investigated microstructures, compositional distributions, and electrical properties of dielectric CaCu3Ti4O12 (CCTO) thin films deposited on Pt/TiO2/SiO2/Si substrates from 700 to 800 °C by pulsed laser deposition. With increasing the deposition temperature from 700 to 750 °C, the dielectric constants (εr) of CCTO films were greatly enhanced from ∼300 to ∼2000 at 10 kHz, respectively. However, the εr values of CCTO films were gradually decreased above 750 °C, which was surely attributable to the formation of a TiO2-rich dead layer at the interface between CCTO and Pt electrode. Compositional analyses by Auger electron spectroscopy, energy dispersive spectroscopy, and electron energy loss spectroscopy revealed that the TiO2-rich dead layer became thicker because of severe Cu diffusion from CCTO films to Pt electrode. The leakage current behaviors of CCTO films are in good agreement with Poole–Frenkel conduction mechanism, where both the TiO2-rich dead layer and rutile TiO2 nanocrystalline particles are considered to play a role of charge trapping centers.