Experiments were conducted to assess the impact of crown architecture on light availability beneath the trees, flowering, fruiting, yield and quality of jamun (Syzygium cumini [L.] Skeels). Trees were maintained as control, palmette and open centre crown. Impact was evaluated for three consecutive years, i.e. 2017–2019. Diffuse light beneath the trees ranged from 69.7 ± 2.22 to 45.9 ± 1.45%, whereas direct light varied from 30.4 ± 0.97 to 54.1 ± 1.78%. At flowering and fruit development stage (June), photosynthesis rate (A) in control trees was 12.5 ± 0.43 μmol CO2/m2/s; however, at fruit maturity and dormancy (August), it was only 9.5 ± 0.35 μmol CO2/m2/s. Similarly, in palmette and open centre trees, photosynthesis rate at flowering and fruit development stage was 13.5 ± 0.46 and 15.7 ± 0.54 μmol CO2/m2/s, respectively; whereas at fruit maturity and dormancy, photosynthesis rate dropped to 10.5 ± 0.39 and 11.7 ± 0.43 μmol CO2/m2/s, respectively. Substantial variation in stomatal conductance (gs), vapour pressure deficit (VPD) and transpiration rate (E) was also found. Days to start flowering ranged from 92 ± 0.33 to 98 ± 0.33. Similarly, days to end flowering varied from 99 ± 0.07 to 107 ± 0.36, days to fruit set 132 ± 0.33 to 139 ± 0.33 and days to fruit maturity 176 ± 0.48 to 184 ± 0.63. Significant variation in fruit length, fruit width and fruit weight was also found. Total soluble solids in fruit pulp varied from 9.0 ± 0.15 to 12.2 ± 0.149°Brix and fruit yield 62.3 ± 1.5 to 86.7 ± 1.33 kg per tree. Noteworthy variation in fruit quality traits was also recorded. This study illustrates that crown architecture has considerable impact on gas exchange parameters, flowering, fruiting, yield and quality of jamun.

The objective of this prospective observational study was to assess the growth and body composition of term small-for-gestational-age (SGA) infants from birth to 6 months and evaluate the effect of catch-up growth (CUG) on body composition. Term SGA newborns were recruited at birth. Anthropometry and body composition were evaluated at 3 days, 6, 10 and 14 weeks, and 6 months. Fat and fat-free mass (FM and FFM) were compared between infants with and without CUG (increase in weight Z-score by > 0·67) by air displacement plethysmography. Factors that could affect body composition and CUG, including parents’ BMI and stature, infants’ birth weight, sex and feeding, were evaluated. A total of 143 SGA newborns (sixty-six boys) with birth weight of 2336 (sd 214) g were enrolled; 109 were followed up till 6 months. Median weight Z-score increased from −2·3 at birth to −1·3 at 6 months, with 51·9 % of infants showing CUG. Infants with CUG had higher FM (1796 (sd 491) g v. 1196 (sd 474) g, P < 0·001) but similar FFM (4969 (sd 508) g v. 4870 (sd 622) g, P = 0·380), and consequently higher FM percentage (FM%) (26·5 (sd 5·8) v. 19·7 (sd 6·9), P < 0·001), compared with those without CUG. Lower birth weight, exclusive breast-feeding and higher parental stature were positively associated with CUG. In conclusion, CUG in term SGA infants in the first 6 months of life was almost entirely attributable to greater gain in FM. Follow-up of this cohort will provide insight into the long-term effect of disproportionate gain in FM in early infancy in SGA babies.

Normally, the reported gain of the microstrip patch antenna is within 8 dBi. Using properly located three shorting pins on three bisectors, the present work reports a method to convert the non-radiating TM11 mode of equilateral triangular patch antennas (ETPAs) to a deformed TM11 radiating mode. The boresight gain of ETPA operating in TM11 mode is enhanced from −10.75 to 12.1 dBi at 5.43 GHz. The boresight measured gain is further enhanced to 14.2 dBi at 5.52 GHz by using a triangular surface-mounted short horn (SMSH) of about ${{\lambda }}/5$ height. The aperture efficiency of the ETPA with the shorting pins is 84.2%. The aperture efficiency is further improved to 94.2% using the SMSH. The measured boresight cross-polarization and side-lobe level are −40 and −29 dB, respectively. The nature of the electricfield and surface current distribution is analyzed, using both the characteristic mode analysis method and high-frequency structure simulator, to understand the role of shorting pin and coaxial feed in converting the non-radiating TM11 mode to the radiating mode. A systematic design process also is presented for a fast design of shorting pin-loaded ETPA on the suitable substrate at a specified frequency.

A two-port ceramic-based antenna loaded with partially reflecting surface (PRS) is structured and explored. Fan-shaped slot is utilized to create circularly polarized wave in both frequency ranges. Dual frequency ranges are due to hybrid mode creation inside the ceramic material, i.e. HEM11δ and HEM12δ modes. PRS is used to change the phase gradient, which in turn tilts the radiation beam (±35°) obtained from different port in opposite direction. This concept is useful to reduce the envelop correlation coefficient using far-field. Experimental verification confirms that the designed antenna works from 26.1 to 27.5 GHz and 31.7 to 33.6 GHz along with less than 3-dB axial ratio from 26.5 to 27.1 GHz and 31.9 to 33.1 GHz respectively. Orthogonal placement of ports introduces the concept of polarization diversity and decreases the coupling between ports by an amount of −25 dB. Good gain value (up to 7.0 dBi) and better value of diversity performance make the designed radiator applicable for 5 G millimeter-wave uses.

We studied the genetic polymorphism of beta-lactoglobulin (β-Lg) whey protein in Gangatiri zebu cows for this Research Communication. The polymorphic nature of milk protein fractions and their association with milk production traits, composition and quality has attracted several efforts in evaluating the allelic distribution of protein locus as a potential dairy trait marker. Genetic variants of β-Lg have highly significant effects on casein number (B > A) and protein recovery (B > A) and also determine the yield of cheese dry matter (B > A). Molecular techniques of polyacrylamide gel electrophoresis and high-resolution accurate mass-spectroscopy were applied to characterize the β-Lg protein obtained from the Gangatiri breed milk. Sequence analysis of β-Lg showed the presence of variant B having UniProt database accession number P02754, coded on the PAEP gene. Our study can provide reference and guidance for the selection of superior milk (having β-LgB) from this indigenous breed that could potentially give a good yield of β-Lg for industrial applications.

A compact quasi-Yagi antenna with a modified ground plane is designed for a through-wall radar on-chip. A slot-based ground plane modification in the proposed antenna results in significant miniaturization with an increase in the impedance bandwidth by 44.62%. The antenna has a high directivity of 9.02 dBi and a front-to-back ratio of 25.76 dB at 2.4 GHz. Based on experiments in real-world deployment scenarios, the performance of the proposed quasi-Yagi antenna is found to be comparable to that of a Vivaldi antenna and a commercial-off-the-shelf horn antenna. Spectrogram-based signatures of a moving person behind a wooden partition and a 40 cm thick masonry wall are successfully obtained using the designed antenna, demonstrating the suitability of the quasi-Yagi antenna for portable applications using a radar-on-chip.

The surgical treatment of transposition of the great arteries, ventricular septal defect, and significant left ventricular outflow tract obstruction continues to evolve. The survival of an unrepaired transposition of the great arteries into late adulthood is a rarity. Even when large intracardiac shunts are present, it remains a lethal cyanotic CHD if it is not surgically corrected soon after birth. We present our experience of two cases, both of whom underwent a single-stage arterial switch operation and an aortic valve replacement for this defect.

Teosinte, the wild progenitor of maize, has immense potential for providing unique traits and is more divergent compared to inbred lines and landraces. One hundred and sixty-nine teosinte-introgressed maize backcross inbred lines were developed to widen the genetic base of maize with predomestication alleles. The population was evaluated phenotypically and genotypic data of 76 SSR markers were used to map quantitative trait loci (QTLs) governing the targeted traits. Sixty-six QTLs were detected for eight plant architect-related traits that are spread over 10 different chromosomes with phenotypic variation ranging from 2.29 to 13.97%. Maximum three stable QTLs were recorded for days to anthesis (DA) followed by two for days to silking (DS), plant height (PH) and node bearing first ear (NBE). For rest of three traits namely flag leaf length (FLL), flag leaf width (FLW) and ears per plant (E/P) only one stable QTL was detected. Among the 16 common QTLs, the marker phi328178-linked QTL governed four characters (DA, DS, FLL, FLW) simultaneously, followed by umc1622-linked (ASI, FLW, E/P), umc2341-linked (DA, DS, NBE) and phi075-linked QTLs (ASI, PH, NBE) controlling three traits each. Remaining 12 QTLs controlled two characters. Molecular association between co-localized QTLs for different traits was also validated at the phenotypic level by significant correlation estimates. For eight studied traits, 53 superior lines were identified which along with parents (teosinte and maize inbred DI-103) were grouped into 12 clusters. Therefore, lines clustered independently can be combined to accumulate desirable traits for the improvement of maize.

This paper describes a multiple-input multiple-output (MIMO) antenna for low millimeter (mm)-wave applications based on dielectric resonators. This is the first time that a filtering response is used in conjunction with an MIMO antenna operating at a low mm-wave frequency. The antenna is simulated using an asymmetrical U-shaped aperture and a microstrip line feed. The suggested filtenna has two distinguishing characteristics: (i) the diversity parameters of the proposed MIMO are increased by including pattern and spatial diversity, and (ii) the proposed feed mechanism of a dielectric resonator provides the filtering response. Between the two ports, a metallic plate tilts the radiation pattern by 45°. The anti-parallel locations of the ports increase the isolation value by >30 dB. To validate the performance of the suggested antenna, the proposed filtenna was built and confirmed. The proposed antenna operates between the frequencies 27.9 and 28.5 GHz. Within the operating frequency range, the observed gain is ~4.5 dBi. On the contrary, the gain suppression level beyond the operational frequency range is ~15 dB. The stable radiation properties and high diversity parameter values of the suggested filtenna make it an effective solution for 5G Internet of Things sensing applications.

Aortopulmonary window is a rare congenital heart defect. Left main coronary artery extrinsic compression by an enlarged pulmonary artery is a rare complication and a potential cause for chest pain and sudden cardiac death in patients with pulmonary hypertension. Here, we present the case of a 14-year-old boy with a large aortopulmonary window who was planned for a device closure, but during the procedure, he developed ST-T segment changes while the device was being deployed, and hence the procedure was abandoned. The boy subsequently underwent a successful surgical closure thereafter.

In this study, nano-hydroxyapatite (n-HAp) of average crystallite size ∼8.15 ± 4 nm of hexagonal geometry with size ranging between 14 and 50 nm was synthesized in laboratory at room temperature by using suitable sources of calcium and phosphate ions and using triethanolamine. Mesoporous bioactive glass (MBG) was synthesized by using cationic surfactant cetyl trimethyl ammonium bromide of the SiO2–CaO–P2O5 glass system. After calcination at 650 °C, MBG powders were having a zeta potential of −16.5 mV (pH ∼9.1), median particle size ∼75 nm, and specific surface area 473.2 m2/g. An aqueous suspension of DNA was used to disperse both n-HAp and MBG and further subjected for analysis including absorbance, circular dichroism spectroscopy, UV-melting, and isothermal titration calorimetry. Absorbance spectroscopy indicated that an equilibrium binding was obtained between both materials and DNA in solution phase. Due to the addition of the nanomaterial, molar ellipticity of DNA was changed revealing that the materials were interacted with DNA. From UV melting characterization, there is a shifting of the melting temperature of DNA in the presence of MBG and n-HAp, respectively, suggesting that the nanoparticles stabilized DNA helix to a considerable extent.

This work focuses on the syntheses of Zn-enriched PtZn nanoparticle electrocatalysts by solution combustion for ethanol oxidation reaction (EOR). Analytical techniques of x-ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy, TEM/scanning TEM-energy dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy are used for the characterization of electrocatalysts. Cyclic voltammetry and chronoamperometry are applied for the electrocatalysis of C2H5OH and stability test in an alkaline medium, respectively. Electrochemical data show that PtZn/C has improved electrocatalytic activity by ~2.3 times compared with commercial Pt/C, in addition to having earlier onset potential and better stability for EOR. The variation of fuel amount in the synthesis has affected crystallite sizes, electronic, and electrochemical properties in electrocatalysts.

This paper reports the effect of Ar molar flow-rate on thermodynamic efficiency analysis of zinc oxide-zinc sulfate (ZnS-ZnO) water splitting cycle useful for solar H2 production. The thermodynamic efficiency analysis is conducted using the HSC Chemistry 7.1 software and its thermodynamic database. Influence of Ar molar flow-rate on total solar energy input essential for the continuous operation of the cycle is explored. Furthermore, the solar-to-fuel energy conversion efficiency for the ZnS-ZnO water splitting cycle is determined.

Chronic osteomyelitis, a bone infection caused by bacteria, requires extensive parenteral treatments. With an aim to develop bioactive glass with antibacterial properties to resist such infections, bioactive glasses with bismuth oxide as the dopant in various amounts up to 8 wt% were prepared. X-ray diffraction patterns and Fourier-transform infrared spectra of glass samples after immersion in simulated body fluid showed the presence of hydroxyapatite (HAp) and hydroxyl carbonate apatite for all samples except with the one having Bi2O3 substitution of 8 wt%. In vitro cell proliferation by MTT assay studies using a mouse fibroblast cell line (NIH3T3) have also been carried out. Primary antimicrobial activity of the glass particles was analyzed against Escherichia coli (E. coli) using broth microdilution method which exhibited bacteriostatic effects and bactericidal properties in selected samples. The combination of bioactivity, cell proliferation, and antibacterial properties of selected Bismuth-containing bioactive glasses could be exploited in treating bone-related infections.