The dependence of the Richtmyer–Meshkov instability (RMI) on post-shock Atwood number ($A_1$) is experimentally investigated for a heavy–light single-mode interface. We create initial interfaces with density ratios of heavy to light gases ranging from 1.73 to 34.07, and achieve the highest $|A_1|$ value reported to date for gaseous-interface experiments (0.95). For the first time, spike acceleration is observed in experiments with a heavy–light configuration. The models for the start-up, linear and weakly nonlinear evolution stages are evaluated over a wide range of $A_1$ conditions. Specifically, the models proposed by Li et al. (Phys. Fluids, vol. 36, 2024, 056104) and Wouchuk & Nishihara (Phys. Plasmas, vol. 4, 1997, 1028–1038) effectively describe the start-up and linear stages, respectively, across all cases. None of the considered nonlinear models is valid under all $A_1$ conditions. Based on the dependence of spike and bubble evolutions on $A_1$ provided by the present work and previous study (Chen et al., J. Fluid Mech., vol. 975, 2023, A29), the SEA model (Sadot et al., Phys. Rev. Lett., vol. 80, 1998, pp. 1654–1657), whose expression has clear physical meanings, is modified by revising the coefficient that governs its prediction for early-time evolution. The modified model applies to prediction of the weakly nonlinear evolution of RMI with $A_1$ ranging from −0.95 to −0.35 and from 0.30 to 0.86. Based on this model, an approximation of the critical $A_1$ for the occurrence of spike acceleration is obtained.

The manipulation of the Richtmyer–Meshkov instability growth at a heavy–light interface via successive shocks is theoretically analysed and experimentally realized in a specific shock-tube facility. An analytical model is developed to forecast the interface evolution before and after the second shock impact, and the possibilities for the amplitude evolution pattern are systematically discussed. Based on the model, the parameter conditions for each scenario are designed, and all possibilities are experimentally realized by altering the time interval between two shock impacts. These findings may enhance the understanding of how successive shocks influence hydrodynamic instabilities in practical applications.

The Northwest Tibet region is defined by several terranes, magmatic belts, basins and sutures, which were primarily shaped by the tectonic activities associated with Proto-, Palaeo- and Neo-Tethys Oceans. However, the basement nature and Precambrian tectonic evolution of the Northwest Tibet region, particularly within the Tashikuergan-Tianshuihai terrane, remain largely unknown. The Hongliutan area, located in the northeastern part of the Tashikuergan-Tianshuihai terrane, contains a critical sequence of Precambrian metamorphic rock strata. Detailed petrological, geochronological, and geochemical analyses of these metamorphic rocks – including plagioclase schist, quartz schist, amphibolite and nearby leucogranite – reveal the intricate processes of tectonic evolution within the Tianshuihai unit. Combining these findings with previous geochronological results is crucial for re-evaluating the nature of the Tashikuergan-Tianshuihai basement and its Precambrian tectonic evolution of the Tashikuergan-Tianshuihai basement. Our results reveal the following: (1) the leucogranite and amphibolite, identified as Cambrian igneous rocks, display distinct geochemical signatures indicative of a continental arc origin. These include calc-alkaline characteristics, enrichment in Th, U, Pb, Zr and Hf and depletion in Ba, Nb, Sr and Ti. Their εNd(t) values, close to zero, further support this tectonic setting, with the leucogranite and amphibolite formed at 506 and 522 Ma, respectively. (2) The plagioclase schist and quartz schist are interpreted to be Neoproterozoic volcaniclastic rocks that formed in a rifted (passive) continental margin setting. The quartz schist is particularly rich in detrital zircons, displaying a broad spectrum of 207Pb/206Pb ages, ranging from 901 to 3364 Ma. (3) A significant subset of detrital zircons within the quartz schist exhibits oscillatory zoning, high Th/U ratios and sharp-edged, anhedral-to-subhedral crystal forms, suggesting a derivation from proximal or deep-seated terranes. The concordant U–Pb zircon ages of 2468 and 974 Ma from the quartz schist, along with the 978 Ma age from the inherited zircons in the amphibolite, and the 1.2–2.1 Ga T2DM(Nd) from leucogranite and metamorphic rocks, collectively suggest that the Tianshuihai unit is likely underpinned by a Palaeoproterozoic basement that indicates Neoproterozoic reworking.

Therefore, our findings suggest the presence of a continuous, northwest-southeast trending Palaeoproterozoic basement underlying the entire Tashikuergan-Tianshuihai terrane. An alternative scenario posits that the ancient basement, currently beneath the Tashikuergan terrane, could extend into the Tianshuihai region, potentially indicating a Cambrian continental margin arc interspersed with remnants of older terranes.

The migration of Mongolian gazelles (Procapra gutturosa) poses a potential risk of outbreak for zoonotic intestinal protozoan parasite infections. This study aims to investigate the infection status of zoonotic intestinal protozoan parasites in these migratory Mongolian gazelles. We collected 120 fecal samples from Mongolian gazelles during their migration from Mongolia to China in December 2023. These samples were analysed using amplification and sequencing of partial SSU rRNA genes to detect the 4 presence of zoonotic intestinal protozoan parasites and characterize their genotypes. Our analysis revealed the presence of several zoonotic intestinal protozoan parasites in the sampled Mongolian gazelles. Cryptosporidium spp. was detected in 14.17% (17/120) of the samples, followed by Cystoisospora belli in 13.33% (16/120), Blastocystis sp. in 16.67% (20/120) and Cyclospora cayetanensis in 30.00% (36/120). Moreover, we identified novel host-adapted genotypes of Cryptosporidium spp. and C. belli, as well as the presence of ST2 and ST13 Blastocystis sp. subtypes, while distinct genotypes were found in Blastocystis sp. and C. cayetanensis. This study revealed the status of 4 prevalent zoonotic intestinal protozoan parasite infections in Mongolian gazelles and provided crucial insights into their characteristics. The prevalence of these parasites in the population highlights the potential risk of cross-border transmission of infectious diseases associated with long-distance migration. Furthermore, the identification of novel genotypes contributes to our understanding of the genetic diversity and adaptation of these parasites. These findings can inform the development of protective measures to mitigate the impact of these infections on the health and survival of Mongolian gazelles.

To investigate the associations between dietary patterns and biological ageing, identify the most recommended dietary pattern for ageing and explore the potential mediating role of gut microbiota in less-developed ethnic minority regions (LEMRs). This prospective cohort study included 8288 participants aged 30–79 years from the China Multi-Ethnic Cohort study. Anthropometric measurements and clinical biomarkers were utilised to construct biological age based on Klemera and Doubal’s method (KDM-BA) and KDM-BA acceleration (KDM-AA). Dietary information was obtained through the baseline FFQ. Six dietary patterns were constructed: plant-based diet index, healthful plant-based diet index, unhealthful plant-based diet index, healthy diet score, Dietary Approaches to Stop Hypertension (DASH), and alternative Mediterranean diets. Follow-up adjusted for baseline analysis assessed the associations between dietary patterns and KDM-AA. Additionally, quantile G-computation identified significant beneficial and harmful food groups. In the subsample of 764 participants, we used causal mediation model to explore the mediating role of gut microbiota in these associations. The results showed that all dietary patterns were associated with KDM-AA, with DASH exhibiting the strongest negative association (β = −0·91, 95 % CI (–1·19, −0·63)). The component analyses revealed that beneficial food groups primarily included tea and soy products, whereas harmful groups mainly comprised salt and processed vegetables. In mediation analysis, the Synergistetes and Pyramidobacter possibly mediated the negative associations between plant-based diets and KDM-AA (5·61–9·19 %). Overall, healthy dietary patterns, especially DASH, are negatively associated with biological ageing in LEMRs, indicating that Synergistetes and Pyramidobacter may be potential mediators. Developing appropriate strategies may promote healthy ageing in LEMRs.

Characterised by the extensive use of obsidian, a blade-based tool inventory and microblade technology, the late Upper Palaeolithic lithic assemblages of the Changbaishan Mountains are associated with the increasingly cold climatic conditions of Marine Isotope Stage 2, yet most remain poorly dated. Here, the authors present new radiocarbon dates associated with evolving blade and microblade toolkits at Helong Dadong, north-east China. At 27 300–24 100 BP, the lower cultural layers contain some of the earliest microblade technology in north-east Asia and highlight the importance of the Changbaishan Mountains in understanding changing hunter-gatherer lifeways in this region during MIS 2.

To evaluate the variations in COVID-19 case fatality rates (CFRs) across different regions and waves, and the impact of public health interventions, social and economic characteristics, and demographic factors on COVID-19 CFRs, we collected data from 30 countries with the highest incidence rate in three waves. We summarized the CFRs of different countries and continents in each wave through meta-analysis. Spearman’s correlation and multiple linear regression were employed to estimate the correlation between influencing factors and reduction rates of CFRs. Significant differences in CFRs were observed among different regions during the three waves (P < 0.001). An association was found between the changes in fully vaccinated rates (rs = 0.41), population density (rs = 0.43), the proportion of individuals over 65 years old (rs = 0.43), and the reduction rates of case fatality rate. Compared to Wave 1, the reduction rates in Wave 2 were associated with population density (β = 0.19, 95%CI: 0.05–0.33) and smoking rates (β = −4.66, 95%CI: −8.98 – −0.33), while in Wave 3 it was associated with booster vaccine rates (β = 0.60, 95%CI: 0.11–1.09) and hospital beds per thousand people (β = 4.15, 95%CI: 1.41–6.89). These findings suggest that the COVID-19 CFRs varied across different countries and waves, and promoting booster vaccinations, increasing hospital bed capacity, and implementing tobacco control measures can help reduce CFRs.

Thin-film beam combining technology is an effective approach to improve output power while maintaining beam quality. However, the lack of comprehensive research into the key factors affecting the beam quality in systems makes it challenging to achieve a practical combined beam source with high brightness. This paper clearly established that the temperature rise of dichroic mirrors (DMs) and sub-beam overlapping precision are the main factors affecting the beam quality of the system, with quantified effects. Based on this understanding, a combined light source of four channels of 3 kW fiber lasers was achieved, and an output power of 11.4 kW with a beam quality of M2x = 1.601 and M2y = 1.558, using three high-steepness low-absorption DMs and the active control technique. To the best of our knowledge, this is the best beam quality for a 10 kW light source. This study offers a solution for practical high-power laser sources in the tens of kilowatts range.

We present evidence revealing that an object with specific properties can exhibit multiple stable falling postures at low Reynolds numbers. By scrutinizing the force equilibrium relationship of a fixed object at various attack angles and Reynolds numbers, we introduce a methodology that can obtain the stable falling postures of the object. This method saves computational resources and more intuitively presents the results in the full parameter domain. Our findings are substantiated by free-fall tests conducted through both physical experiments and numerical simulations, which validate the existence of multiple stable solutions in accordance with the interpolation results obtained with fixed objects. Additionally, we quantify the abundance and distribution patterns of stable falling postures for a diverse range of representative shapes. This discovery highlights the existence of multiple stable solutions that are universally present across objects of different shapes. The implications of this research extend to the design, stability control and trajectory prediction of all free and controlled flights in both air and water.

This paper is concerned with the study on an open problem of classifying conformally flat minimal Legendrian submanifolds in the $(2n+1)$-dimensional unit sphere $\mathbb {S}^{2n+1}$ admitting a Sasakian structure $(\varphi,\,\xi,\,\eta,\,g)$ for $n\ge 3$, motivated by the classification of minimal Legendrian submanifolds with constant sectional curvature. First of all, we completely classify such Legendrian submanifolds by assuming that the tensor $K:=-\varphi h$ is semi-parallel, which is introduced as a natural extension of $C$-parallel second fundamental form $h$. Secondly, such submanifolds have also been determined under the condition that the Ricci tensor is semi-parallel, generalizing the Einstein condition. Finally, as direct consequences, new characterizations of the Calabi torus are presented.

Soft drink consumption has become a highly controversial public health issue. Given the pattern of consumption in China, sugar-sweetened beverage is the main type of soft drink consumed. Due to containing high levels of fructose, a soft drink may have a deleterious effect on handgrip strength (HGS) due to oxidative stress, inflammation and insulin resistance. However, few studies show an association between soft drink consumption and HGS in adults. We aimed to investigate the association between soft drink consumption and longitudinal changes in HGS among a Chinese adult population. A longitudinal population-based cohort study (5-year follow-up, median: 3·66 years) was conducted in Tianjin, China. A total of 11 125 participants (56·7 % men) were enrolled. HGS was measured using a handheld digital dynamometer. Soft drink consumption (mainly sugar-containing carbonated beverages) was measured at baseline using a validated FFQ. ANCOVA was used to evaluate the association between soft drink consumption and annual change in HGS or weight-adjusted HGS. After adjusting for multiple confounding factors, the least square means (95 % CI) of annual change in HGS across soft drink consumption frequencies were −0·70 (–2·49, 1·09) for rarely drinks, −0·82 (–2·62, 0·97) for < 1 cup/week and −0·86 (–2·66, 0·93) for ≥ 1 cup/week (Pfor trend < 0·05). Likewise, a similar association was observed between soft drink consumption and annual change in weight-adjusted HGS. The results indicate that higher soft drink consumption was associated with faster HGS decline in Chinese adults.

Evidence of the relationship between fecal short-chain fatty acids (SCFA) levels, dietary quality and type 2 diabetes mellitus (T2DM) in rural populations is limited. Here, we aimed to investigate the association between fecal SCFA levels and T2DM and the combined effects of dietar quality on T2DM in rural China. In total, 100 adults were included in the case–control study. Dietary quality was assessed by the Alternate Healthy Eating Index 2010 (AHEI-2010), and SCFA levels were analysed using the GC-MS system. Generalised linear regression was conducted to calculate the OR and 95 % CI to evaluate the effect of SCFA level and dietary quality on the risk of T2DM. Finally, an interaction was used to study the combined effect of SCFA levels and AHEI-2010 scores on T2DM. T2DM participants had lower levels of acetic and butyric acid. Generalised linear regression analysis revealed that the OR (95 % CI) of the highest acetic and butyric acid levels were 0·099 (0·022, 0·441) and 0·210 (0·057, 0·774), respectively, compared with the subjects with the lowest tertile of level. We also observed a significantly lower risk of T2DM with acetic acid levels > 1330·106 μg/g or butyric acid levels > 585·031 μg/g. Moreover, the risks of higher acetic and butyric acid levels of T2DM were 0·007 (95 % CI: 0·001, 0·148), 0·005 (95 % CI: 0·001, 0·120) compared with participants with lower AHEI-2010 scores (all P < 0·05). Acetate and butyrate levels may be important modifiable beneficial factors affecting T2DM in rural China. Improving dietary quality for body metabolism balance should be encouraged to promote good health.

The laboratory generation and diagnosis of uniform near-critical-density (NCD) plasmas play critical roles in various studies and applications, such as fusion science, high energy density physics, astrophysics as well as relativistic electron beam generation. Here we successfully generated the quasistatic NCD plasma sample by heating a low-density tri-cellulose acetate (TCA) foam with the high-power-laser-driven hohlraum radiation. The temperature of the hohlraum is determined to be 20 eV by analyzing the spectra obtained with the transmission grating spectrometer. The single-order diffraction grating was employed to eliminate the high-order disturbance. The temperature of the heated foam is determined to be T = 16.8 ± 1.1 eV by analyzing the high-resolution spectra obtained with a flat-field grating spectrometer. The electron density of the heated foam is about $N_e=4.0\pm 0.3\times {10}^{20}{\text{cm}}^{-3}$ under the reasonable assumption of constant mass density.

In preparation for an experiment with a laser-generated intense proton beam at the Laser Fusion Research Center at Mianyang to investigate the 11B(p,α)2α reaction, we performed a measurement at very low proton energy between 140 keV and 172 keV using the high-voltage platform at the Institute of Modern Physics, Lanzhou. The aim of the experiment was to test the ability to use CR-39 track detectors for cross-section measurements and to remeasure the cross-section of this reaction close to the first resonance using the thick target approach. We obtained the cross-section σ = 45.6 ± 12.5 mb near 156 keV. Our result confirms the feasibility of CR-39 type track detector for nuclear reaction measurement also in low-energy regions.

An accurate dynamic model of a robot is fundamentally important for a control system, while uncertainties residing in the model are inevitable in a physical robot system. The uncertainties can be categorized as internal disturbances and external disturbances in general. The former may include dynamic model errors and joint frictions, while the latter may include external payloads or human-exerted force to the robot. Disturbance observer is an important technique to estimate and compensate for the uncertainties of the dynamic model. Different types of disturbance observers have been developed to estimate the lumped uncertainties so far. In this paper, we conducted a brief survey on five typical types of observers from a perspective of practical implementation in a robot control system, including generalized momentum observer (GMO), joint velocity observer (JVOB), nonlinear disturbance observer (NDOB), disturbance Kalman filter (DKF), and extended state observer (ESO). First, we introduced the basics of each observer including equations and derivations. Two common types of disturbances are considered as two scenarios, that is, constant external disturbance and time-varying external disturbance. Then, the observers are separately implemented in each of the two simulated scenarios, and the disturbance tracking performance of each observer is presented while their performance in the same scenario has also been compared in the same figure. Finally, the main features and possible behaviors of each type of observer are summarized and discussed. This survey is devoted to helping readers learn the basic expressions of five typical observers and implement them in a robot control system.