Converging evidence has suggested that treatment augmentation with a second-generation atypical antipsychotic (SGA) may improve treatment outcomes in major depressive disorder (MDD) patients after an incomplete response to a first-line antidepressant. Cariprazine is a recently approved SGA for MDD augmentation. Herein, we evaluate both continuous (ie, change in depressive symptom severity scores over time) and categorical (ie, remission and response rates) outcomes. Following a full-text review, four randomized controlled trials (RCTs) were included in our meta-analysis, while five studies were included for a qualitative review. Risk ratios (RRs) were calculated for all included randomized controlled studies to determine the relative response and remission rates of cariprazine compared to placebo augmentation. The RR for all-cause dropout was also determined as a proxy for overall acceptability. Two studies found a statistically significant treatment response using cariprazine augmentation. One study observed depressive symptom remission for cariprazine compared to placebo. Our random-effects model revealed moderate antidepressant effects of cariprazine, with a standardized mean difference (SMD) in Montgomery–Åsberg Depression Rating Scale (MADRS) scores of −1.79 (95% CI): −2.89, −0.69). Our pooled response RR and remission RR were calculated as 1.21 (95% CI: 1.05, 1.39, P=0.008) and 0.99 (95% CI: 0.84, 1.17, P=0.91), respectively. The RR for response was statistically significant (P<0.05). However, the RR for remission was not statistically significant. The findings from our meta-analysis include a variable magnitude of effects. Evidence suggests cariprazine may be an effective treatment for MDD; however, further results are needed to clarify this relation.

We report a facile method to fabricate CuNi nano-octahedra and nanocubes using a colloidal synthesis approach. The CuNi nanocrystals terminated with exclusive crystallographic facets were controlled and achieved by a group of synergetic capping ligands in a hot solution system. Specifically, the growth of {111}-bounded CuNi nano-octahedra is derived by a thermodynamic control, whereas the generation of {100}-terminated CuNi nanocubes is steered by a kinetic capping of chloride. Using a reduction of 4-nitrophenol with sodium borohydride as a model reaction, CuNi nano-octahedra and nanocubes demonstrated a strong facet-dependence due to their different surface energies although both exhibited remarkable catalytic activity with the high rate constant over mass (k/m). A kinetic study indicated that this is a pseudo first-order reaction with an excess of sodium borohydride. CuNi nanocubes as the catalysts showed better catalytic performance (k/m = 385 s-1•g-1) than the CuNi nano-octahedra (k/m = 120 s-1•g-1), indicating that 4-nitrophenol and hydrogen were adsorbed on the {100} facets with their molecules parallel to the surface much easier than those on {111} facets.

In this work, we investigate misfit dislocations in PbTe/PbSe heteroepitaxial systems using the concurrent atomistic–continuum (CAC) method. A potential model containing the long-range Coulombic interaction and short-range Buckingham potential is developed for the system. By considering the minimum potential energy of relaxed interface structures for various initial conditions and PbTe layer thicknesses, the equilibrium structure of misfit dislocations and the dislocation spacings in PbTe/PbSe(001) heteroepitaxial thin films are obtained as a function of the PbTe layer thicknesses grown on a PbSe substrate. The critical layer thickness above which misfit dislocations inevitably form, the structure of the misfit dislocations at the interfaces, and the dependence of average dislocation spacing on PbTe layer thickness are obtained and discussed. The simulation results provide an explanation for the narrowing of the spread of the distribution of misfit dislocation spacing as layer thickness increases in PbTe/PbSe(001) heteroepitaxy.

The influence of the content of trifluoroacetate (TFA), in the precursor solution, on the critical current density (Jc) of YBa2Cu3O7−x (YBCO) superconducting films was investigated. We found that a TFA/Ba ratio of 0.68 is optimal to obtain high-performance YBCO films. Using this optimal solution, we then developed an ultraviolet (UV) light soaking technique to prepare YBCO films. This resulted in the constituent elements being uniformly distributed in the films, and this then enabled enhanced Jc. The addition of water vapor during the UV soaking process decreased the content of carbon residue in the films, and further increased the Jc of the resulting YBCO films.

This work presents the recent progress in the development of the concurrent atomistic-continuum (CAC) method for coarse-grained space- and time-resolved atomistic simulations of phonon transport. Application examples, including heat pulses propagating across grain boundaries and phase interfaces, as well as the interactions between phonons and moving dislocations, are provided to demonstrate the capabilities of CAC. The simulation results provide visual evidence and reveal the underlying physics of a variety of phenomena, including phonon focusing, wave interference, dislocation drag, interfacial Kapitza resistance caused by quasi-ballistic phonon transport, etc. A new method to quantify fluxes in transient transport processes is also introduced.

The evolution of arid environments in northern China was a major environmental change during the Quaternary. Here we present the dating and environmental proxy results from a 35 m long core (A-WL10ZK-1) collected from the Ulan Buh Desert (UBD), along with supplemental data from four other cores. The UBD is one of the main desert dune fields in China and our results indicate the UBD has undergone complex evolution during the late Quaternary. Most of the present UBD was covered by a Jilantai-Hetao Mega-paleolake lasting until ~ 90 ka ago. A sandy desert environment prevailed throughout the UBD during the last glacial period and early Holocene. A wetland environment characterized by the formation of numerous interdunal ponds in the northern UBD occurred at ~ 8–7 ka, although a dune field persisted in the southern UBD. The modern UBD landscape formed after these wetlands dried up. During the last 2000 years, eolian sand from the Badain Jaran Desert has invaded the northern UBD, while farming and overgrazing resulted in the formation of the eastern UBD. We suggest that the formation of UBD landforms is related to the disintegration of the megalake Jilantai-Hetao and to summer monsoon changes during the last glaciation and Holocene.

Parkinson's disease (PD) has been proposed to result from the interaction of aging and environment in susceptible individuals. Defective metabolism of debrisoquine, inherited as an autosomal recessive, has been associated with this susceptibility. In 35 PD patients and 19 age-matched controls, no significant differences in debrisoquine metabolism were found, although a trend to impaired metabolism was noted in patients with disease onset ≤40. Foci of PD patients were associated with rural living and well water drinking, or rural living coupled with market gardening or wood pulp mills. In a questionnaire survey, patients with PD onset ≤age 47 were significantly more likely to have lived in rural areas and to have drunk well water than those with onset ≥age 54 (p≤0.01). Because of population mobility in North America, a case-control study designed to test environmental, occupational, dietary and other proposed risk factors for PD was conducted in China, where the population is more stationary and the environment more stable. No significant differences in incidences of head trauma, smoking or childhood measles were found between patients and controls.

The poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) based ferroelectric and relaxor materials have been proved to be good electrocaloric (EC) materials. To further enhance the EC effect in ferroelectric relaxor terpolymer poly(vinylidene fluoride–trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE)), composites such as polymer-polymer blends and nanocomposites filled with inorganic nanoparticles are fabricated and investigated. It is found that the addition of small amount of filler (such as P(VDF-TrFE) or nano-ZrO2) can increase terpolymer’s crystallinity and enhance its relaxor behavior through interface couplings. The increased crystallinity and enhanced relaxor behavior together result in enhanced electrocaloric effect. The results demonstrate the promise of composite approaches in tailoring and enhancing ECE in the relaxor terpolymers.

Al2O3 films are grown by atomic layer deposition (ALD) using trimethylaluminum and water as precursors on HF-last and NH3 plasma pretreatment Si substrates. The thickness, surface roughness, and density of Al2O3 films as well as the nature of their interlayers with Si substrates are characterized by x-ray reflectivity and spectroscopic ellipsometry techniques. The growth rates of Al2O3 films are 1.1 Å/cycle and 1.3 Å/cycle, respectively, on HF-last and NH3-plasma-nitrided surfaces. Al2O3 layer densities are rather independent of the number of growth cycles in all cases. The interfacial film thickness increases with the number of ALD cycles when deposited on an HF-last Si substrate. However, because SiOxNy inhibits oxygen diffusion, the interfacial film thickness is independent of the number of ALD cycles on the nitrided Si substrate.