This paper retrospectively analysed the prevalence of macrolide-resistant Mycoplasma pneumoniae (MRMP) in some parts of China. Between January 2013 and December 2019, we collected 4,145 respiratory samples, including pharyngeal swabs and alveolar lavage fluid. The highest PCR-positive rate of M. pneumoniae was 74.5% in Beijing, the highest resistance rate was 100% in Shanghai, and Gansu was the lowest with 20%. The highest PCR-positive rate of M. pneumoniae was 74.5% in 2013, and the highest MRMP was 97.4% in 2019; the PCR-positive rate of M. pneumoniae for adults in Beijing was 17.9% and the MRMP was 10.48%. Among the children diagnosed with community-acquired pneumonia (CAP), the PCR-positive and macrolide-resistant rates of M. pneumoniae were both higher in the severe ones. A2063G in domain V of 23S rRNA was the major macrolide-resistant mutation, accounting for more than 90%. The MIC values of all MRMP to erythromycin and azithromycin were ≥ 64 μg/ml, and the MICs of tetracycline and levofloxacin were ≤ 0.5 μg/ml and ≤ 1 μg/ml, respectively. The macrolide resistance varied in different regions and years. Among inpatients, the macrolide-resistant rate was higher in severe pneumonia. A2063G was the common mutation, and we found no resistance to tetracycline and levofloxacin.

Functional montmorillonite can be dispersed in polymer coatings and organic species and polymers can be intercalated into the interlayer space or grafted onto the surface of the functional montmorillonite. The addition of functional montmorillonite into polymer-based coatings can significantly improve anti-corrosion, refractory, super-hydrophobicity, antibacterial activity, and absorption of solar radiation by the resulting montmorillonite/polymer coatings. Montmorillonite can be functionalized for this purpose by ion exchange, intercalation, exfoliation, or combinations of these treatments. The rigid montmorillonite layers interspersed within the polymer matrix inhibit the penetration of corrosive substances, minimize the impact of high-temperature airflow, and thereby lead to strong resistance of the coating to corrosion and fire. The combination of polymers and dispersed montmorillonite nanolayers, which are modified by metal ions, metal oxides, and hydrophobic organic species, allows the resulting  composite coating to have quite a rough surface and a much smaller surface free energy so that the montmorillonite/polymer coating possesses superhydrophobicity. The interlayer space of functional montmorillonite can also host or encapsulate antibacterial substances, phase-change materials, and solar energy-absorbing materials. Moreover, it can act as a template to make these guest species exist in a more stable and ordered state. Literature surveys suggest that future work on the functional montmorillonite/polymer coatings should be targeted at the manufacture of functional montmorillonite nanolayers by finding more suitable modifiers and tuning the dispersion and funtionalities of montmorillonite in the coatings.

We report a generation of energetic protons by the interaction of a high-energy electron driving beam with an underdense plasma slab. After an interaction period of approximately 4000 fs, a proton beam with maximum energy greater than 250 MeV can be achieved by applying a driving beam with energy 1.0 GeV to a 200 $\mathrm {\mu }$m plasma slab. Our two-dimensional particle-in-cell simulations also show that the proton acceleration process can be divided into two stages. In the first stage, a strong positive longitudinal electric field appears near the rear boundary of the plasma slab after the driving beam has passed through it. This acceleration process is similar to the target normal sheath acceleration scheme by the interaction between intense pulsed laser with overdense plasma targets. In the second stage, the accelerated protons experience a long-range acceleration process with a two-stream instability between the high-energy driving beam and the proton beam. Further analyses show that this accelerated proton beam is equipped with the property of good collimation and high energy. This scheme presents a new way for proton or ion acceleration on some special occasions.

Acritarch biostratigraphic and δ13C chemostratigraphic data from the Krol A Formation in the Solan area (Lesser Himalaya, northern India) are integrated to aid inter-basinal correlation of early–middle Ediacaran strata. We identified a prominent negative δ13C excursion (likely equivalent to EN2 in the lower Doushantuo Formation in the Yangtze Gorges area of South China), over a dozen species of acanthomorphs (including two new species—Cavaspina tiwariae Xiao n. sp., Dictyotidium grazhdankinii Xiao n. sp.), and numerous other microfossils from an interval in the Krol A Formation. Most microfossil taxa from the Krol A and the underlying Infra-Krol formations are also present in the Doushantuo Formation. Infra-Krol acanthomorphs support a correlation with the earliest Doushantuo biozone: the Appendisphaera grandis-Weissiella grandistella-Tianzhushania spinosa Assemblage Zone. Krol A microfossils indicate a correlation with the second or (more likely, when δ13C data are considered) the third biozone in the lower Doushantuo Formation (i.e., the Tanarium tuberosum-Schizofusa zangwenlongii or Tanarium conoideum-Cavaspina basiconica Assemblage Zone). The association of acanthomorphs with EN2 in the Krol Formation fills a critical gap in South China where chert nodules, and thus acanthomorphs, are rare in the EN2 interval. Like many other Ediacaran acanthomorphs assemblages, Krol A and Doushantuo acanthomorphs are distributed in low paleolatitudes, and they may represent a distinct paleobiogeographic province in east Gondwana. The Indian data affirm the stratigraphic significance of acanthomorphs and δ13C, clarify key issues of lower Ediacaran bio- and chemostratigraphic correlation, and strengthen the basis for the study of Ediacaran eukaryote evolution and paleobiogeography.

UUID: http://zoobank.org/5289fdb2-0e49-4b3b-880f-f5b21acab371.

In this article, the electron trapping and acceleration in the wake field driven by an ultrarelativistic hollow electron beam is studied. When the hollow driver injects into plasma, there is a doughnut-shaped electron bubble formed because of the existence of a special ‘backflow’ beam in the centre of the electron bubble. At the same time, there is a transverse convergence of the hollow driver, which leads to the weakening of the backflow beam. This results in a local electron density transition at the rear of the bubble. During this process, there is an expansion of the longitudinal electron bubble size, and a bunch of background electrons is trapped by the wake field at the rear of the bubble. The tracks for the trapped electrons show that there are two sources: one is from the bubble sheath and the other is from the unique backflow beam. In the particle-in-cell simulation where the driving beam has initial energy of $1.0$ GeV per particle, the trapped beam can be accelerated to energy of more than $1.5$ GeV per particle and the corresponding transformer ratio is $1.5$. With the increase of driving beam energy up to $40.0$ GeV, a transformer ratio of $1.4$ still can be achieved. By adjusting the hollow beam density, it is possible to control the trapped beam charge value and beam quality, such as its energy spread and transverse emittance.

Chickenpox is a common acute and highly contagious disease in childhood; moreover, there is currently no targeted treatment. Carrying out an early warning on chickenpox plays an important role in taking targeted measures in advance as well as preventing the outbreak of the disease. In recent years, the infectious disease dynamic model has been widely used in the research of various infectious diseases. The logistic differential equation model can well demonstrate the epidemic characteristics of epidemic outbreaks, gives the point at which the early epidemic rate changes from slow to fast. Therefore, our study aims to use the logistic differential equation model to explore the epidemic characteristics and early-warning time of varicella. Meanwhile, the data of varicella cases were collected from first week of 2008 to 52nd week of 2017 in Changsha. Finally, our study found that the logistic model can be well fitted with varicella data, besides the model illustrated that there are two peaks of varicella at each year in Changsha City. One is the peak in summer–autumn corresponding to the 8th–38th week; the other is in winter–spring corresponding to the time from the 38th to the seventh week next year. The ‘epidemic acceleration week’ average value of summer–autumn and winter–spring are about the 16th week (ranging from the 15th to 17th week) and 45th week (ranging from the 44th to 47th week), respectively. What is more, taking warning measures during the acceleration week, the preventive effect will be delayed; thus, we recommend intervene during recommended warning weeks which are the 15th and 44th weeks instead.

Living Caprini are dominant bovids in the pan-Tibetan area that are strongly adapted to dry steppe and high-mountain meadow habitats. Some taxa with Holarctic distributions, e.g., Ovis Linnaeus, 1758, were thought to originate on the Tibetan Plateau and subsequently dispersed elsewhere, which was depicted as an ‘out of Tibet’ story. However, except for some information on a stem caprine assemblage from the Qaidam Basin, the early evolution of Caprini around the Tibetan Plateau is poorly known. Here, we report new material of Olonbulukia tsaidamensis Bohlin, 1937, which was a member of this stem caprine assemblage, from the Wuzhong region, northern China, confirming the similarity of the Wuzhong Fauna and ‘Qaidam Fauna.’ Based on a biometric study of horncores from the ‘Qaidam’ and Wuzhong faunas, we recognize six taxa from this stem caprine assemblage: O. tsaidamensis, O. sp., Qurliqnoria cheni Bohlin, 1937, Tossunnoria pseudibex Bohlin, 1937, ?Protoryx cf. P. enanus Köhler, 1987, and cf. Pachytragus sp. Among these taxa, Q. cheni and T. pseudibex are probably related to some extant Tibetan endemic species, e.g., the Tibetan antelope, Pantholops hodgsonii (Abel, 1826), and the Himalayan tahr, Hemitragus jemlahicus (Smith, 1826). Others might be ancestral to the Turolian caprine assemblages and even possibly gave rise to the extant Caprina. This work reveals an early radiation of stem caprines along the northern side of the rising Tibetan Plateau and indicates a mixed pattern of pan-Tibetan stem caprine evolution prior to their dispersal out of the Tibetan Plateau.

The purpose of this study was to investigate the joint associations of dietary pattern and television viewing with risk factors of CVD among urban adults in China. A community-based cross-sectional study was conducted among urban adults in Nanjing, China. Five dietary patterns were identified based on a FFQ. Television time was obtained from a standard questionnaire and further classified into two categories (≤7, >7 h/week). Multiple logistic regression was used to calculate the OR and 95 % CI for the separate and joint associations of dietary patterns and television viewing with CVD risk factors. Compared with other dietary patterns, participants who followed the healthy traditional pattern had a lower likelihood of abdominal obesity (AO) (OR 0·52; 95 % CI 0·41, 0·67). Participants watching television no more than 7 h/week presented a 19 and 21 % lower likelihood for hypertension (HT) and elevated total cholesterol (ETC) than those with television time >7 h/week. Individuals who had less television time and a healthy dietary pattern had a lower OR for the presence of AO (OR 0·48; 95 % CI 0·36, 0·65), HT (OR 0·71; 95 % CI 0·66, 0·77), ETC (OR 0·72; 95 % CI 0·57, 0·91) and elevated TAG (OR 0·76; 95 % CI 0·61, 0·95), compared with those who followed other dietary patterns and television time >7 h/week. In conclusion, both healthy traditional pattern and less television time are jointly associated with reduced levels of CVD risk factors. It has important public health implications regarding the precision prevention of CVD at population level.

We apply the feature-tracking method to L-band synthetic aperture radar (SAR) images to derive detailed motion patterns of glaciers in the Yigong Zangbo basin during summer 2007. The results indicate that the flow patterns are generally constrained by the valley geometry and terrain complexity. The mean velocities of the 12 glaciers were 15–206 m a−1,with a maximum of 423 m a−1 for Glacier No. 5a. The majority of the glaciers exhibited high and low velocities in their upper and lower sections, respectively. The glacier area ranges from 3 to 42 km2. It is found that velocity shows a positive correlation with the glacier area and length. Many small-scale temporal/spatial variations in the glacier flow patterns were observed along the central glacier flowline.

Gauged river flow records from China generally span only a few decades, which hampers the detection of long-term, decadal- to centennial-scale cycles and trends in streamflow variability. New and updated tree-ring chronologies help reconstructed the water-year (October–September) streamflow for the Aksu River, which is an important river at the edge of the Taklimakan Desert that drains into the Tarim Basin. The reconstruction dates back to 1692 and has an adjusted r2 of 0.61 (1957–2006). Based on frequency, intensity and duration of droughts and pluvial events, the lowest streamflows occurred in the 1920s. Since then streamflow has continuously increased, and was exceptionally rapidly after the 1960s, until today. The start and end of the 20th century to the present were the highest streamflow periods. The mid-20th century was the longest and driest period over the past 300 yr. The reconstructed streamflow series has a strong positive correlation with the North Atlantic Oscillation Index. Changes in mid-latitude circulation patterns influencing precipitation may have indirectly resulted in streamflow variations along the Aksu River over the past 300 yr. The rapid increase and the exceptional streamflows of the 1960s are likely linked with global warming and mid-latitude atmospheric circulation changes.

The volatile compounds of crofton weed infested by cotton aphids and sprayed with MeJA were collected and analyzed by the TCT-GC/MS technique. The healthy weeds were controls. Seventeen volatiles identified from crofton weed included green leaf odors, monoterpenes and sequiterpenes, and oxo-compounds. Camphene, 2-carene, α-phellandrene, ρ-cymene, and caryophyllene were the major volatiles and constituted about 77% of the total volatile emissions from the control. In the aphid-infested weeds, no new induced component was found. Among the terpenes, ρ-cymene increased markedly in the infested weeds compared with the control, whereas all sesquiterpenes decreased markedly. Levels of endogenous JA in leaves and young stems of the aphid-infested weeds were markedly higher than in the control, whereas both endogenous SA level and ABA level were not significantly different. MeJA sprayed on crofton weed with the aphid infestation had a similar effect on volatile emissions. It is suggested that JA was one of the most important signals in crofton weed and could regulate the emission of volatile compounds.

X-ray powder diffraction data, unit-cell parameters, and space group for thiamphenicol, C12H15Cl2NO5S, are reported [a = 17.346(3), b = 15.341(0), c = 5.790 (2) Å, α = β = γ = 90°, unit-cell volume V = 1540.8(3) Å3, Z = 4, and space group P212121]. All measured lines were indexed and are consistent with the P212121 space group. No detectable impurities were observed.

Increasing dietary Ca intake may prevent the excessive mobilisation of bone mineral in nursing mothers. We aimed to investigate whether higher Ca intake could positively modulate the bone mineral changes in Chinese postpartum lactating women. The study was a 12-month randomised, double-blinded, parallel group trial conducted over 12 months. A total of 150 postpartum women were randomly selected to receive either 40 g of milk powder containing 300 mg of Ca and 5 μg of vitamin D (Low-Ca group) or same milk powder additionally fortified with 300 mg of Ca (Mid-Ca group) or 600 mg of Ca (High-Ca group). Bone mineral density (BMD) for the whole body, the lumbar spine, the total left hip and its sub-regions was measured using dual-energy X-ray absorptiometry. A total of 102 subjects completed the whole trial. The duration of total lactating time was 7·9 (sd 2·8) months on average. The intention-to-treat analysis yielded the following mean percentage changes in BMD for the whole body, the lumbar spine and the total left hip, respectively: −0·93 (sd 1·97), 2·11 (sd 4·90) and −1·60 (sd 2·65) % for the Low-Ca group; −0·56 (sd 1·89), 2·21 (sd 3·77) and −1·43 (sd 2·30) % for the Mid-Ca group; and −0·44 (sd 1·67), 2·32 (sd 4·66) and −0·95 (sd 4·08) % for the High-Ca group. The differences between the groups were not statistically significant (P: 0·5–0·9). The results of the complete case analysis were similar. In sum, we found no significant differences in the bone mineral changes from baseline to 12 months in postpartum lactating women consuming milk powder fortified with different levels of Ca.

Nanogenerators (NGs) have great potential to solve the problems of energy depletion and environmental pollution. Here, two types of flexible nanogenerators (FNGs) based on graphene oxide (GO) and multiwall carbon nanotubes (MW-CNTs) are presented. The peak output voltage and current of GO based FNG reached up to 2 V and 30 nA, respectively, under 15 N force at 1 Hz. Moreover, the output voltage could be improved to 34.4 V when the frequency was increased to 10 Hz. It was also found the output voltage increased from 0.1 V to 2.0 V using a released GO structure. The other FNG was made by MW-CNTs mixed with ZnO nanoparticles (NPs). Its output voltage and power reached up to 7.5 V and 18.75 mW, respectively, which is much larger than that of bare ZnO based FNG. Furthermore, a peak voltage of 30 V could be gained by stamping one’s foot on the FNG. Finally, a modified NG was fabricated using four springs and two flexible layers. As a result, the voltage and power reached up to 9 V and 27mW, respectively. These works may bring out broad applications in energy harvesting.

We associate the topological entropy of monotone recurrence relations with the Aubry–Mather theory. If there exists an interval $[{\it\rho}_{0},{\it\rho}_{1}]$ such that, for each ${\it\omega}\in ({\it\rho}_{0},{\it\rho}_{1})$, all Birkhoff minimizers with rotation number ${\it\omega}$ do not form a foliation, then the diffeomorphism on the high-dimensional cylinder defined via the monotone recurrence relation has positive topological entropy.

Crystal and X-ray powder diffraction data are presented for the Al3Ho2Si2 ternary compound. The powder pattern was indexed and refined on a monoclinic cell with the Al3Y2Si2 structure type with space group C12/m1, a = 10.1096(2) Å, b = 4.020(6) Å, c = 6.5734(6) Å, β = 100.848(2)°, V = 262.37 Å3, Z = 2ρx = 5.910 g cm−3, F30 = 142.8(0.006, 35), and RIR = 0.91.

This paper presents three boundary meshless methods for solving problems of steady-state and transient heat conduction in nonlinear functionally graded materials (FGMs). The three methods are, respectively, the method of fundamental solution (MFS), the boundary knot method (BKM), and the collocation Trefftz method (CTM) in conjunction with Kirchhoff transformation and various variable transformations. In the analysis, Laplace transform technique is employed to handle the time variable in transient heat conduction problem and the Stehfest numerical Laplace inversion is applied to retrieve the corresponding time-dependent solutions. The proposed MFS, BKM and CTM are mathematically simple, easy-to-programming, meshless, highly accurate and integration-free. Three numerical examples of steady state and transient heat conduction in nonlinear FGMs are considered, and the results are compared with those from meshless local boundary integral equation method (LBIEM) and analytical solutions to demonstrate the efficiency of the present schemes.