A multilevel latent transition analysis (LTA) with a mixture IRT measurement model (MixIRTM) is described for investigating the effectiveness of an intervention. The addition of a MixIRTM to the multilevel LTA permits consideration of both potential heterogeneity in students’ response to instructional intervention as well as a methodology for assessing stage sequential change over time at both student and teacher levels. Results from an LTA–MixIRTM and multilevel LTA–MixIRTM were compared in the context of an educational intervention study. Both models were able to describe homogeneities in problem solving and transition patterns. However, ignoring a multilevel structure in LTA–MixIRTM led to different results in group membership assignment in empirical results. Results for the multilevel LTA–MixIRTM indicated that there were distinct individual differences in the different transition patterns. The students receiving the intervention treatment outscored their business as usual (i.e., control group) counterparts on the curriculum-based Fractions Computation test. In addition, 27.4 % of the students in the sample moved from the low ability student-level latent class to the high ability student-level latent class. Students were characterized differently depending on the teacher-level latent class.

This study conducts experimental investigations into wake-induced vibration (WIV) of a circular cylinder placed downstream of an oscillating cylinder. Surprisingly, it is observed that the previously identified WIV phenomenon, characterized by a sustained increase in amplitude at higher reduced velocities, does not occur when the upstream cylinder oscillates at large amplitudes. Instead, a different phenomenon, which we refer to as the ‘wake-captured vibration’, becomes dominant. The experiments reveal a negative correlation between the vortex-induced vibration amplitude response of the upstream cylinder and the WIV amplitude response of the downstream cylinder. Through a quasi-steady and linear instability analysis, the study demonstrates that the previously proposed wake-displacement mechanism may not be applicable for predicting the cylinder WIV response in the wake of an oscillating body. This is because the lift force gradients across the wake, measured through stationary cylinder experiments, decrease significantly when the upstream cylinder vibrates at higher amplitudes. Consequently, actively controlled vibration experiments are conducted to systematically map the hydrodynamic properties of the downstream cylinder vibrating in the wake of an oscillating cylinder. The findings align with observations from free-vibration experiments, and help to explain the amplitude and frequency response of WIV. Additionally, wake visualization through particle image velocimetry is conducted to provide further insights into the complex wake and vortex–body interactions.

Ridge B is one of the least studied areas in Antarctica but has been considered to be a potential location for the oldest ice on Earth. Among important parameters for calculating where very old ice may exist, geothermal heat flux (GHF) is critical but poorly understood. Here, GHF is determined by quantifying the transitions between dry and wet basal conditions using a radioglaciological method applied to airborne radio-echo sounding data. GHF is then constrained by a thermodynamic model matched to the transitions. The results show that GHF in Ridge B varies locally and ranges from 48.5 to 65.1 mW m−2, with an average value of 58.0 mW m−2, which is consistent with the current known GHF constrained by subglacial lakes and derived from Vostok ice core temperature measurements. Our work highlights the value of considering local GHF when locating the oldest ice in this potential region or other regions.

In this paper, we investigate the attitude manoeuver planning and tracking control of the flexible satellite equipped with a coilable mast. Due to its flexible beamlike structure, the coilable mast experiences bending and torsional modal vibrations in multi-direction. The complex nonlinear coupling and other external disturbances significantly impact the achievement of high-precision attitude control. To overcome these challenges, a robust attitude tracking controller is proposed for easy implementation by the Attitude Determination and Control System (ADCS). The controller consists of a disturbance compensator, feedforward controller and output feedback controller. The compensator, based on a Nonlinear Disturbance Observer (NDO), effectively compensates for the cluster disturbances caused by vibrations, environmental factors and parameter perturbations. The feedforward controller tracks the desired path in the nominal satellite model. Furthermore, the output feedback controller enables large-angle manoeuver control of the satellite and evaluates the suppression effect of the controlled output on the observation error of cluster disturbances used the ${L_2}$-gain. Simulation results demonstrate that the proposed controller successfully achieves high-precision attitude tracking control during large-angle manoeuvering.

Bentonite- and sepiolite-supported copper catalysts have been prepared either by adsorption of Cu(II) from aqueous solutions of copper nitrate at pH ~4.5 or by adsorption of a [Cu(NH3)4]2+ complex from an ammonia solution of CuSO4 at pH ~9.5. The structure and composition of the calcined preparations have been studied by X-ray diffraction, chemical analysis, and energy dispersive X-rays. Textural characteristics have derived from the analysis of the adsorption-desorption isotherms of N2. All catalysts have been tested for the dehydrogenation of methanol to methyl formate. For this reaction, bentonite-based catalysts were found to have very little activity, which indicates that copper located in the inter-lamellar spaces is inaccessible to methanol molecules. On the contrary, copper-sepiolite catalysts showed a very high specific activity even for those catalysts with a very low copper content. The chemical state of copper in the catalysts on-stream has been revealed by X-ray photoelectron spectroscopy and X-ray-induced Auger techniques. In most of the catalysts Cu+ is the dominant copper species.

Two series of pillared clays were prepared from a purified montmorillonite (95%) from La Serrata of Nijar, Spain, and polycations of Al and Zr using various methods. The effect of both the pillaring cation and the procedure of preparation on the physicochemical characteristics of the resulting materials was studied. Changes in texture were determined by X-ray diffraction (XRD) and N2 adsorption at 76 K and changes in acidity were determined by thermogravimetry following pyridine adsorption at room temperature and further desorption at a constant heating rate of 10 K min−1 in the range of 298–623 K. The relation between the size and charge (n/q) of the pillaring cation, which is dependent on the degree of cation hydrolysis, is the main factor affecting pore size and acidity of the synthesized materials. The pH of the pillaring solution affects the stability of the parent clay and the properties of the pillared clay. Below a pH of 3 and depending on contact time, the montmorillonite may delaminate and partially dissolve to produce products that affect the properties of the resulting materials. Microporosity increases for both Al or Zr-pillared clays. For Zr-pillared clays, microporosity is accompanied by changes in the mesoporosity and macroporosity as a result of clay delamination. Acidity dramatically increases by pillaring, especially strong acidity, and the acid strength distribution depends on starting salt concentration, aging time, and temperature.

Ultra-processed plant-based foods, such as plant-based burgers, have gained in popularity. Particularly in the out-of-home (OOH) environment, evidence regarding their nutritional profile and environmental sustainability is still evolving. Plant-based burgers available at selected OOH sites were randomly sampled in Amsterdam, Copenhagen, Lisbon and London. Plant-based burgers (patty, bread and condiment) (n 41) were lab analysed for their energy, macronutrients, amino acids and minerals content per 100 g and serving and were compared with reference values. For the plant-based burgers, the median values per 100 g were 234 kcal, 20·8 g carbohydrates, 3·5 g dietary fibre and 12·0 g fat, including 0·08 g TFS and 2·2 g SFA. Protein content was 8·9 g/100 g, with low protein quality according to amino acid composition. Median Na content was 389 mg/100 g, equivalent to 1 g salt. Compared with references, the median serving provided 31% of energy intake based on a 2000 kcal per day and contributed to carbohydrates (17–28%), dietary fibre (42%), protein (40%), total fat (48%), SFA (26%) and Na (54%). One serving provided 15–23% of the reference values for Ca, K and Mg, while higher contributions were found for Zn, Mn, P and Fe (30–67%). The ultra-processed plant-based burgers provide protein, dietary fibre and essential minerals and contain relatively high levels of energy, Na and total fats. The amino acid composition indicated low protein quality. The multifaceted nutritional profile of plant-based burgers highlights the need for manufacturers to implement improvements to better support healthy dietary habits, including reducing energy, Na and total fats.

Ulcerative colitis (UC) is an immune-mediated inflammation of the colonic mucosa. Gut microbiota dysbiosis may play a significant role in disease pathogenesis by causing shifts in metabolomic profiles within the gut. To identify differences and trends in the metabolomic profile of paediatric UC patients pre- and post-faecal microbiota transplants (FMT). Forty-six paediatric patients with mild-to-moderate UC and 30 healthy paediatric patients were enrolled in this study. Baseline stool samples were collected prior to FMT initiation and at months 1, 3, 6, and 12 post-FMT. Pediatric Ulcerative Colitis Activity Index (PUCAI) scores were calculated at baseline and months 1, 3, 6, and 12 after FMT. The average Bray–Curtis dissimilarities to healthy subjects decreased after FMT. In principal coordinate analysis plots, UC patients’ centroids drew nearer to healthy individuals. The variance explained by phenotype (Healthy versus UC) reduced and remained significant. From 1 to 3 months after FMT, PUCAI trends were statistically significant and decreasing. PUCAI scores remain flat starting 6 months after FMT. This study concludes that paediatric UC patients have a significantly different baseline metabolite profile than healthy controls. Although being time limited, FMT significantly altered these metabolite profiles and shifted them towards that of healthy controls.

Verbascum blattaria L., commonly known as moth mullein, naturalized in the USA that produces white or yellow flowers could be considered as a potential ornamental plant. However, genetic characterization using molecular markers and leaf morphology, colourimetric analysis and flowering of V. blattaria influenced by low temperature treatments was not investigated to evaluate as a potential horticultural and landscape plant use. The basal leaves developed during the rosette-growth stage were oblanceolate with an obtuse leaf apex and incisions at the margin. Leaves produced on the stem during the reproductive development were ovate or lanceolate with an obtuse or acute leaf apex. Regardless of the colour of the petiole and leaf blade during the rosette-growth stage, there were no differences in the sequences of nuclear ribosomal ITS and chloroplast interspacer. All plants produced creamy white flowers with a purplish base corolla. All leaves formed during the vegetative and reproductive development were glabrous. Numerous stalked glandular trichomes were observed in the sepal, pedicel and bracts. Seeds started to germinate in 10 days at 25°C and reached the plateau in 30 days after sowing. The earliest flowering occurred in 131 days when the plants received 20 days of low temperature treatment (CD) (20 CD), producing 76 flowers, the highest number compared to the number of flowers produced by plants that received 0, 40 and 60 CD. Plants that received 20 CD exhibited early flowering, probably because of the early transition from vegetative growth to reproductive development, as judged by the short stem to the first flower.

The target backsheath field acceleration mechanism is one of the main mechanisms of laser-driven proton acceleration (LDPA) and strongly depends on the comprehensive performance of the ultrashort ultra-intense lasers used as the driving sources. The successful use of the SG-II Peta-watt (SG-II PW) laser facility for LDPA and its applications in radiographic diagnoses have been manifested by the good performance of the SG-II PW facility. Recently, the SG-II PW laser facility has undergone extensive maintenance and a comprehensive technical upgrade in terms of the seed source, laser contrast and terminal focus. LDPA experiments were performed using the maintained SG-II PW laser beam, and the highest cutoff energy of the proton beam was obviously increased. Accordingly, a double-film target structure was used, and the maximum cutoff energy of the proton beam was up to 70 MeV. These results demonstrate that the comprehensive performance of the SG-II PW laser facility was improved significantly.

Paravulvus zhongshanensis sp. nov., isolated from soil in a location at Jiangsu Province, China, is described and illustrated based on morphological, morphometric and molecular characterizations. The new species is characterized by its body 1.17–1.53 mm long, lip region offset by marked constriction and 12.1–13.8 μm broad, mural tooth deltoid and 9.6–11.7 μm long, neck 278–360 μm long, pharyngeal expansion 164–208 μm long or occupying more than one-half (54–62%) of total neck length, uterus 32.5–35.3 μm long or 1.0–1.1 times the corresponding body diameter, V = 47.8–53.4, paravulvae absent, female tail subcylindrical conoid (30.5–39.5 μm, c = 36.0–45.5, c′ = 1.7–2.2) with widely rounded end, and male unknown. The new species was compared with six known species of the genus including Paravulvus acuticaudatus, Paravulvus confusus, Paravulvus hartingii, Paravulvus iranicus, Paravulvus loofi and Paravulvus microdontus mainly by similarities in having conical tail and c′ value larger than 1.3. The rRNA and mitochondrial cytochrome oxidase subunit 1 genes of the new species were obtained and were used for reconstructing the phylogenetic relationships of the new species.

A partition $\lambda $ of n is said to be nearly self-conjugate if the Ferrers graph of $\lambda $ and its transpose have exactly $n-1$ cells in common. The generating function of the number of such partitions was first conjectured by Campbell and recently confirmed by Campbell and Chern (‘Nearly self-conjugate integer partitions’, submitted for publication). We present a simple and direct analytic proof and a combinatorial proof of an equivalent statement.