The Early-Middle Jurassic impression/compression macroflora and the palynoflora from the Qaidam Basin in the northeastern Qinghai-Xizang (Tibetan) Plateau have been well studied; however, fossil wood from this region has not been previously documented systematically. Here, we describe an anatomically well-preserved fossil wood specimen from the Lower Jurassic Huoshaoshan Formation at the Dameigou section in northern Qinghai Province, northwestern China. This fossil exhibits typical Metapodocarpoxylon Dupéron-Laudoueneix et Pons anatomy with usually araucarian radial tracheid pits and variable cross-field pits, representing a new record for Metapodocarpoxylon in the Qaidam Basin. This discovery indicates that trees with this type of wood anatomy were not confined to northern Gondwana but also grew in more northerly regions in Laurasia. The wood displays distinct growth rings, with abundant, well-formed earlywood and narrow latewood. This observation, along with previous interpretations based on macroflora, palynoflora and sedimentological data, suggests that a warm and humid climate with mild seasonality prevailed in the region during the Early Jurassic.

Bronze mou vessels appear in Shu tombs in south-west China during the Eastern Zhou period (c. 771–256 BC). Examination of these vessels reveals major changes in the supply of metal and alloying technology in the Shu State, throwing new light on the social impact of the Qin conquest and later unification of China.

Let X be a compact Kähler manifold, and let $L \rightarrow X$ be a holomorphic line bundle equipped with a singular metric h such that the curvature $\mathrm {i}\Theta _{L,h}\geqslant 0$ in the sense of currents. The main result of this paper is the vanishing of $H^n(X,\mathcal {O}(\Omega ^p_X\otimes L)\otimes \mathcal {I}(h))$ for $p\geqslant n-\operatorname {nd}(L,h)+1$, which generalizes Bogomolov’s vanishing theorem and Watanabe’s result.

This paper introduces a novel fiber-based picosecond burst-mode laser system capable of operating at high power and high repetition rates. A pulse-circulating fiber ring was developed as a burst generator, achieving an intra-burst repetition rate of 469 MHz without the need for a high-repetition-rate seed source. This design also allows for flexible adjustment of the number of sub-pulses, burst repetition rate and burst shape. In addition, a master oscillator power amplifier was employed to analyze the amplification characteristics of bursts. The system demonstrated a maximum average power of 606 W, with a measured sub-pulse duration of 62 ps and the highest sub-pulse peak power of 980 kW. To the best of our knowledge, this marks the highest average power obtained in burst-mode ultrafast lasers. Such a laser system holds potential for applications in precision manufacturing, high-speed imaging, high-precision ranging and other diverse domains.

A high-energy pulsed vacuum ultraviolet (VUV) solid-state laser at 177 nm with high peak power by the sixth harmonic of a neodymium-doped yttrium aluminum garnet (Nd:YAG) amplifier in a KBe2BO3F2 prism-coupled device was demonstrated. The ultraviolet (UV) pump laser is a 352 ps pulsed, spatial top-hat super-Gaussian beam at 355 nm. A high energy of a 7.12 mJ VUV laser at 177 nm is obtained with a pulse width of 255 ps, indicating a peak power of 28 MW, and the conversion efficiency is 9.42% from 355 to 177 nm. The measured results fitted well with the theoretical prediction. It is the highest pulse energy and highest peak power ever reported in the VUV range for any solid-state lasers. The high-energy, high-peak-power, and high-spatial-uniformity VUV laser is of great interest for ultra-fine machining and particle-size measurements using UV in-line Fraunhofer holography diagnostics.

This paper develops a novel full-state-constrained intelligent adaptive control (FIAC) scheme for a class of uncertain nonlinear systems under full state constraints, unmodeled dynamics and external disturbances. The key point of the proposed scheme is to appropriately suppress and compensate for unmodeled dynamics that are coupled with other states of the system under the conditions of various disturbances and full state constraints. Firstly, to guarantee that the time-varying asymmetric full state constraints are obeyed, a simple and valid nonlinear error transformation method has been proposed, which can simplify the constrained control problem of the system states into a bounded control problem of the transformed states. Secondly, considering the coupling relationship between the unmodeled dynamics and other states of the controlled system such as system states and control inputs, a decoupling approach for coupling uncertainties is introduced. Thereafter, owing to the employed dynamic signal and bias radial basis function neural network (BIAS-RBFNN) improved on traditional RBFNN, the adverse effects of unmodeled dynamics on the controlled system can be suppressed appropriately. Furthermore, the matched and mismatched disturbances are reasonably estimated and circumvented by a mathematical inequality and a disturbance observer, respectively. Finally, numerical simulations are provided to demonstrate the effectiveness of the proposed FIAC strategy.

This study examined the sour grapes/sweet lemons rationalization through 2 conditions: ‘attainable’ (sweet lemons) and ‘unattainable’ (sour grapes), reflecting China’s 2019-nCoV vaccination strategy. The aim was to find ways to change people’s beliefs and preferences regarding vaccines by easing their safety concerns and encouraging more willingness to get vaccinated. An online survey was conducted from January 22 to 27, 2021, with 3,123 residents across 30 provinces and municipalities in the Chinese mainland. The direction of belief and preference changed in line with the sour grapes/sweet lemons rationalization. Using hypothetical and real contrasts, we compared those for whom the vaccine was relatively unattainable (‘sour grapes’ condition) with those who could get the vaccine easily (‘sweet lemons’). Whether the vaccine was attainable was determined in the early stage of the vaccine roll-out by membership in a select group of workers that was supposed to be vaccinated to the greatest extent possible, or, by being in the second stage when the vaccine was available to all. The attainable conditions demonstrated higher evaluation in vaccine safety, higher willingness to be vaccinated, and lower willingness to wait and see. Hence, we propose that the manipulation of vaccine attainability, which formed the basis of the application of sour grapes/sweet lemons rationalization, can be utilized as a means to manipulate the choice architecture to nudge individuals to ease vaccine safety concerns, reducing wait-and-see tendencies, and enhancing vaccination willingness. This approach can expedite universal vaccination and its associated benefits in future scenarios resembling the 2019-nCoV vaccine rollout.

With the over-use of tetracycline (TC) and its ultimate accumulation in aquatic systems, the demand for TC removal from contaminated water is increasing due to its severe threat to public health. Clay minerals have attracted great attention as low-cost adsorbents for controlling water pollution. The objective of the present study was to measure the adsorption behavior and mechanisms of TC on allophane, a nanosized clay mineral with a hollow spherical structure; to highlight the advantage of the allophane nanostructure, a further objective was to compare allophane with halloysite and montmorillonite, which have nanostructures that differ from allophane. Structural features and surface physicochemical properties were characterized by transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), zeta potential, N2-physisorption, and acid–base titration. The adsorption data showed that TC adsorption followed the pseudo-second order and Langmuir models. The adsorption was pH dependent, as all three clay minerals performed better under neutral to weakly alkaline conditions and maintained high adsorption performance in the presence of co-existing Na+/K+/Ca2+/Mg2+ cations. Regeneration of the adsorbent was excellent, with efficiencies exceeding 75% after five recycles. By comparison, allophane always exhibited the greatest adsorption capacity, up to 796 mg g–1 at ~pH 9. The TC adsorption on allophane and halloysite was dominated by inner-sphere complexation, together with a small amount of electrostatic adsorption, while that on montmorillonite involved mainly interlayer cation exchange. The findings provide insights into the effects of nanostructures of clay minerals on their TC adsorption performance and highlight the huge potential of allophane as an efficient and inexpensive adsorbent for TC removal.

Superhydrophobic (SHPo) surfaces can capture a thin layer of air called a plastron under water to reduce skin friction. Although a ~30 % drag reduction has been recently reported with longitudinal micro-trench SHPo surfaces under a boat and in a towing tank, the results lacked the consistency to establish a clear trend. Designed based on Yu et al. (J. Fluid Mech, vol. 962, 2023, A9), this work develops and tests a series of high-performance SHPo surface coupons that can sustain a pinned plastron underneath a passenger motorboat revamped to reach 14 knots. Importantly, plastrons in a pinned state, not just their existence, are confirmed during flow experiments for the first time. All the drag-reduction data measured on different longitudinal micro-trenches are found to collapse if plotted against slip length in wall units. In comparison, aligned posts and transverse trenches show less and little drag reduction, respectively, confirming the adverse effect of the spanwise slip in turbulent flows. This report not only verifies SHPo surfaces can provide a consistent drag reduction at high speeds in open sea but also shows that one may predict the amount of drag reduction in turbulent flows using the physical slip length obtained for Stokes flows.

To investigate the associations between dietary patterns and biological ageing, identify the most recommended dietary pattern for ageing and explore the potential mediating role of gut microbiota in less-developed ethnic minority regions (LEMRs). This prospective cohort study included 8288 participants aged 30–79 years from the China Multi-Ethnic Cohort study. Anthropometric measurements and clinical biomarkers were utilised to construct biological age based on Klemera and Doubal’s method (KDM-BA) and KDM-BA acceleration (KDM-AA). Dietary information was obtained through the baseline FFQ. Six dietary patterns were constructed: plant-based diet index, healthful plant-based diet index, unhealthful plant-based diet index, healthy diet score, Dietary Approaches to Stop Hypertension (DASH), and alternative Mediterranean diets. Follow-up adjusted for baseline analysis assessed the associations between dietary patterns and KDM-AA. Additionally, quantile G-computation identified significant beneficial and harmful food groups. In the subsample of 764 participants, we used causal mediation model to explore the mediating role of gut microbiota in these associations. The results showed that all dietary patterns were associated with KDM-AA, with DASH exhibiting the strongest negative association (β = −0·91, 95 % CI (–1·19, −0·63)). The component analyses revealed that beneficial food groups primarily included tea and soy products, whereas harmful groups mainly comprised salt and processed vegetables. In mediation analysis, the Synergistetes and Pyramidobacter possibly mediated the negative associations between plant-based diets and KDM-AA (5·61–9·19 %). Overall, healthy dietary patterns, especially DASH, are negatively associated with biological ageing in LEMRs, indicating that Synergistetes and Pyramidobacter may be potential mediators. Developing appropriate strategies may promote healthy ageing in LEMRs.

As a required sample preparation method for 14C graphite, the Zn-Fe reduction method has been widely used in various laboratories. However, there is still insufficient research to improve the efficiency of graphite synthesis, reduce modern carbon contamination, and test other condition methodologies at Guangxi Normal University (GXNU). In this work, the experimental parameters, such as the reduction temperature, reaction time, reagent dose, Fe powder pretreatment, and other factors, in the Zn-Fe flame sealing reduction method for 14C graphite samples were explored and determined. The background induced by the sample preparation process was (2.06 ± 0.55) × 10–15, while the 12C– beam current were better than 40μA. The results provide essential instructions for preparing 14C graphite of ∼1 mg at the GXNU lab and technical support for the development of 14C dating and tracing, contributing to biology and environmental science.

A new vacuum line to extract CO2 from carbonate and dissolved inorganic carbon (DIC) in water was established at Guangxi Normal University. The vacuum line consisted of two main components: a CO2 bubble circulation region and a CO2 purification collection region, both of which were made of quartz glass and metal pipelines. To validate its reliability, a series of carbonate samples were prepared using this system. The total recovery rate of CO2 extraction and graphitization exceeded 80%. Furthermore, the carbon content in calcium carbonate exhibited a linear relationship with the CO2 pressure within the system, demonstrating its stability and reliability. The system was also employed to prepare and analyze various samples, including calcium carbonate blanks, foraminiferal, shell, groundwater, and subsurface oil-water samples. The accelerator mass spectrometry (AMS) results indicated that the average beam current for 12C- in the samples exceeded 40 μA. Additionally, the contamination introduced during the liquid sample preparation process was approximately (1.77 ± 0.57) × 10−14. Overall, the graphitized preparation system for carbonate and DIC in water exhibited high efficiency and recovery, meeting the requirements for samples dating back to approximately 30,000 years.

Motivated by the work initiated by Chapman [‘Determinants of Legendre symbol matrices’, Acta Arith. 115 (2004), 231–244], we investigate some arithmetical properties of generalised Legendre matrices over finite fields. For example, letting $a_1,\ldots ,a_{(q-1)/2}$ be all the nonzero squares in the finite field $\mathbb {F}_q$ containing q elements with $2\nmid q$, we give the explicit value of the determinant $D_{(q-1)/2}=\det [(a_i+a_j)^{(q-3)/2}]_{1\le i,j\le (q-1)/2}$. In particular, if $q=p$ is a prime greater than $3$, then

$$ \begin{align*}\bigg(\frac{\det D_{(p-1)/2}}{p}\bigg)= \begin{cases} 1 & \mbox{if}\ p\equiv1\pmod4,\\ (-1)^{(h(-p)+1)/2} & \mbox{if}\ p\equiv 3\pmod4\ \text{and}\ p>3, \end{cases}\end{align*} $$

where $(\frac {\cdot }{p})$ is the Legendre symbol and $h(-p)$ is the class number of $\mathbb {Q}(\sqrt {-p})$.

Natural clays are often employed as substrates for heterogeneous catalysts. However, the direct use of raw clays as catalysts has received less research attention. The objective of the present study was to help fill this gap by investigating catalytic properties of raw pelagic clays (PC) collected from the Indian Ocean. The raw PC were discovered to be efficient catalysts in the reduction of 4-nitrophenol (4-NP) in the presence of NaBH4. The effects of parameters including pH values, dosages of PC, and initial concentration of 4-NP and NaBH4 on the conversion or degradation rate of 4-NP have been investigated. The 4-NP was observed to be completely degraded within 480 s under conditions of 0.10 mM 4-NP, 25.0 mM NaBH4, and 0.20 g/L PC at an initial pH value of 7.0. The apparent rate constant was evaluated to be 27.53 × 10–3 s–1. Unlike previous pseudo-first order kinetics experiments, the induction period and degradation stages were observed to occur simultaneously during the PC catalysis. The S-shaped kinetics for 4-NP conversion was found to be perfectly matched by Fermi's function, and the enzyme-like catalysis by PC was appointed to describe the kinetics. Species of Fe(III), Mn(IV), and Mn(III) in PC were found to be essential, and were partly reduced to Fe(0) and Mn(II) by NaBH4 in our reaction, contributing to rapid conversion of 4-NP to 4-aminophenol (4-AP). The raw PC was converted to magnetic PC (m-PC) particles, which made PC particles separate easily for cycling use. This discovery would also have applications in continuous flow-fluid catalysis.