from Part III - Evolved 3G mobile communications
Published online by Cambridge University Press: 27 May 2010
This chapter studies MQAM for downlink multicode CDMA systems with interference cancellation to support high data rate services. In the current 3G WCDMA systems, in addition to multicode transmission, MQAM is employed for HSDPA due to its high spectral efficiency. In frequency selective fading channels, multipath interference seriously degrades the system performance. In this chapter, theoretical analysis is presented to show that with the help of interference cancellation technique, MQAM may be employed in high SNR cases to increase system throughput. Moreover, it is found that when using the interference cancellation technique, extra pilot power should be invested for more accurate channel estimation, and consequently better BER performance can be achieved.
Introduction
MQAM modulated multicode CDMA is proposed for HSDPA in the 3G standards, by which the throughput can be increased without extra bandwidth investment. As mentioned in Chapter 1, the introduction of multicode transmission causes multipath interference in frequency selective fading channels due to multipath propagation delays. In this chapter, a coherent Rake receiver with interference cancellation is studied.
Moreover, in WCDMA systems, a common pilot channel is used for channel estimation at the receiver. However, channel estimation error occurs since the received pilot channel signal suffers from the multipath interference and AWGN noise, which affects the coherent data decision and the regeneration of multipath interference, and thus degrades the system performance. The effects of imperfect channel estimation and additive multipath interference on system performance are investigated.
To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.