Hostname: page-component-7dd5485656-npwhs Total loading time: 0 Render date: 2025-10-30T22:43:09.253Z Has data issue: false hasContentIssue false
  • English
  • Français

Evaluation of σ33 From Diffraction Experiments Performed With Synchrotron Radiation in the Ω - and Ψ - Goniometries

Published online by Cambridge University Press:  06 March 2019

I. Detempte  and
H. Ruppersberg
I. Detempte
Affiliation:
F.B. Werkstoffwissenschaften und Fertigungstechnik Universität des Saarlandes Postfach 11 50 D-66041 Saarbrücken, Germany
H. Ruppersberg
Affiliation:
F.B. Werkstoffwissenschaften und Fertigungstechnik Universität des Saarlandes Postfach 11 50 D-66041 Saarbrücken, Germany
Get access

Abstract

A formalism which was proposed by Ruppersberg (1992) for a self consistent evaluation of stress gradients in the case of strongly varying σ33(T) stresses is applied for studying the variation of the stress components with distance z from the irradiated surface of a ground hardened steel plate.

Information

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 37: Forty-Second Annual Conference on Applications of X-ray Analysis, August 2-6, 1993 , 1993 , pp. 245 - 251
Copyright
Copyright © International Centre for Diffraction Data 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Stickforth, J., Über den Zusammenhang zwischen röntgenographischer Gitterdehnung und makroskopischen elastiscnen Spannungen, Techn. Mitt. Krupp 24: 89, (1966).Google Scholar
2. Noyan, I.C. and Cohen, J.B., “Residual Stress, Measurement by Diffraction and Interpretation”, Springer, New York (1987).Google Scholar
3. Krier, J., Ruppersberg, H., Berveiller, M. and Lipinski, P., Elastic and plastic anisotropy effects on second order internal stresses in textured polycrystalline materials, Textures and Microstructures 14-18: 1147, (1991).Google Scholar
4. Abuhasan, A., Balasingh, C. and Predecki, P.K., Residual stresses in alumina/silicon carbide (whisker) composites by X-ray diffraction, J. Am, Ceramic Soc. 73: 2474, (1990).Google Scholar
5. Hartmann, S., Schütz, J., Matheis, S., Berveiller, M. and Ruppersberg, H., Thermal expansion of cementite and its relation to thermally induced phase-specific stresses in ferrite-cementite mixtures, in: “ Residual Stress ”, V. Hauk, H. P. Hougardy, E. Macherauch and H.-D. Tietz, eds., DGM Informationsgesellschaft (1993), p. 107.Google Scholar
6. Ruppersberg, H., Complicated average stress-fields and attempts at their evaluation with X-ray diffraction methods, Adv. X-Ray Anal. 37: (1994).Google Scholar
7. Winhottz, R.A. and Cohen, J.B., Separation of the macro- and micro- stresses in plastically deformed 1080 steel, Adv. X-Ray Anal. 32: 341, (1989).Google Scholar
8. Ruppersberg, H., Formalism for the evaluation of pseudo-macro stress fields σ33(z) from Ω and Ψ-mode diffraction experiments performed with synchrotron radiation, Adv. X-Ray Anal. 35: 481, (1992),Google Scholar
9. Detemple, I. and Ruppersberg, H., Evaluation of phase - specific stress fields σ33(z) from Ω and Ψ-mode experiments performed with synchrotron radiation, in: “Residual Stress”, V. Hauk, Hougardy, H.P., E. Macherauch and H.-D, Tietz, eds., DGM Informationsgesellschaft, Oberursel (1993), p. 179.Google Scholar
10. Ruppersberg, H. and Detemple, I., Evaluation of the stress field in a ground steel plate from energy-dispersive X-ray diffraction experiments, Mat. Sci. Eng. A 161: 41, (1993).Google Scholar