No CrossRef data available.
Article contents
X-Ray Elastic Constants of Sintered and HIP'ed ZrO2 Ceramics with Different Chemical Components
Published online by Cambridge University Press: 06 March 2019
Abstract
Mechanical and X-ray elastic constants of four types of ZrO2 were measured for (133) planes with Cr-Kα radiation. The main differences among the specimens were the chemical components, the sintering method and the heat-treatment. It was found that the elastic constants were affected by the heat-treatment, but little by the other factors. The influence of the method of the peak determination on the result was also examined. The residual stresses at the knife edge were determined.
- Type
- IX. Stress and Strain Determination by Diffraction Methods, Peak Broadening Analysis
- Information
- Copyright
- Copyright © International Centre for Diffraction Data 1992
References
1.
Suzuki, K. and Tanaka, K., Proceedings of the third international conference on residual stress (ICRS-3),620-625(1992).Google Scholar
2.
Endoh, T., Yoshida, K. and Kawakami, M., Proceedings of the third international conference on residual stress (ICRS-3),668-673(1992).Google Scholar
4.
Tanaka, K., Matui, E., Kurimura, T. and Akiniwa, Y., Journal of Society of Material Science, Japan, 36[407], 792–798(1987).Google Scholar