Hostname: page-component-848d4c4894-75dct Total loading time: 0 Render date: 2024-05-27T13:04:58.426Z Has data issue: false hasContentIssue false
  • English
  • Français

On the effectiveness of active aeroelastic structures for morphing aircraft

Part of: Smart Aircraft

Published online by Cambridge University Press:  27 January 2016

R. M. Ajaj ,
M. I. Friswell  and
E. I. Saavedra Flores
R. M. Ajaj*
Affiliation:
Aeronautics and Astronautics, University of Southampton, Southampton, UK
M. I. Friswell
Affiliation:
College of Engineering, Swansea University, Swansea, UK
E. I. Saavedra Flores
Affiliation:
Departamento de Ingeniería en Obras Civiles, Universidad de Santiago de Chile, Santiago, Chile
*
r.ajaj@southampton.ac.uk
Get access Rights & Permissions [Opens in a new window]

Abstract

This note assesses the benefits of active aeroelastic structures (AAS) in enhancing flight performance and control authority. A representative AAS concept, whose torsional stiffness and shear centre position can be altered depending on the instantaneous flight condition, is employed in the wing of a medium altitude long endurance (MALE) UAV. A multidisciplinary design optimisation (MDO) suite is used in this study. It turns out that AAS can be very effective when used for enhancing control authority of the vehicle but have limited benefits in terms of flight performance (lift to drag).

Type
Research Article
Information
The Aeronautical Journal , Volume 117 , Issue 1197 , November 2013 , pp. 1167 - 1176
Copyright
Copyright © Royal Aeronautical Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Torenbeek, E. Development and application of a comprehensive, design-sensitive weight prediction method for wing structures of transport category aircraft, 1992, Report LR-693, Delft University of Technology.Google Scholar
2. Miller, G.D. Active flexible wing (AFW) technology, 1988, Report: AFWAL-TR-87-3096, Rockwell International North American Aircraft Operations, Los Angeles, CA, USA.Google Scholar
3. Clarke, R., Allen, M.J., Dibley, R.P., Gera, J. and Hodgkinson, J. Flight test of the F/A-18 active aeroelastic wing airplane, 2005, AIAA 2005-6316, AIAA Atmospheric Flight Mechanics Conference and Exhibition, San Francisco, CA, USA.Google Scholar
4. Pendleton, E.W., Bessette, D., Field, P.B., Miller, G.D. and Griffin, K.E. Active Aeroelastic Wing Flight Research Program: Technical program and model analytical development, J Aircr, 2000, 37, (4), pp 554–561, doi: 10.2514/2.2654.Google Scholar
5. Griffin, K.E. and Hopkins, M.A. Smart stiffness for improved roll control, J Aircr, 1997, Engineering Notes, 34, (3), pp 445–447.Google Scholar
6. Chen, P.C., Sarhaddi, D., Jha, R., Liu, D.D., Griffin, K. and Yurkovich, R. Variable stiffness spar approach for aircraft manoeuvre enhancement using ASTROS, J Aircr, September-October 2000, 37, (5).Google Scholar
7. Nam, C., Chen, P.C., Sarhaddi, D., Liu, D., Griffin, K. and Yurkovich, R. Torsion-free wing concept for aircraft maneuver enhancement, 2000, AIAA 2000-1620, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Atlanta, GA, USA.Google Scholar
8. Florance, J.R., Heeg, J., Spain, C.V. and Lively, P.S. Variable stiffness spar wind-tunnel modal development and testing, 2004, AIAA 2004-1588, 45th AIAA/ASME/ASCE/AHS/ASC/Structures, Structural Dynamics and Materials Conference, Palm Springs, California, USA.Google Scholar
9. Kuzmina, S., Amiryants, G., Schweiger, J., Cooper, J., Amprikidis, M. and Sensberg, O. Review and outlook on active and passive aeroelastic design concept for future aircraft, 2002, ICAS, 432, 2002, pp 1–10, ICAS 2002 Congress, 8-13 September 2002, Toronto, Canada.Google Scholar
10. Schweiger, J. and Suleman, A. The European research project – Active Aeroelastic Structures, 2003, CEAS Internatiomnal Forum on Aeroelasticity and Structural Dynamics.Google Scholar
11. Simpson, J., Anguita-Delgado, L., Kawieski, G., Nilsson, B., Vaccaro, V. and Kawiecki, G. Review of European research project Active Aeroelastic Aircraft Structures (3AS), 2005, European Conference for Aerospace Sciences (EUCASS), Moscow, Russia.Google Scholar
12. Amprikidis, M., Cooper, J.E. and Sensburg, O. Development of an adaptive stiffness all-moving vertical tail, 2004,, AIAA 2004-1883, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Spring, CA, USA.Google Scholar
13. Cooper, J.E., Amprikidis, M., Ameduri, S., Concilio, A., San Millan, J. and Castanon, M. Adaptive stiffness systems for an active all-moving vertical tail, 2005, European Conference for Aerospace Sciences (EUCASS) 4-7 July 2005, Moscow, Russia.Google Scholar
14. Cooper, J.E. Adaptive stiffness structures for air vehicle drag reduction, Multifunctional Structures/Integration of Sensors and Antennas Meeting Proceedings RTO-MP-AVT-141, 2006, (pp 15–1-15-12). Paper 15, Nueuilly-sur-Seine, France.Google Scholar
15. Cooper, J.E. Towards the optimisation of adaptive aeroelastic structures, 2006, School of Mechanical, Aerospace and Civil Engineering, University of Manchester, Manchester, UK.Google Scholar
16. Hodigere-Siddaramaiah, V. and Cooper, J.E. On the use of adaptive internal structures to optimise wing aerodynamics distribution, 2006, AIAA 2006-2131, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Newport, RI, USA.Google Scholar
17. Ajaj, R.M, Friswell, M.I., Dettmer, W.G., Isikveren, A.T. and Allegri, G. Roll control of a MALE UAV using the adaptive torsion wing, Aeronaut J, March 2013, 117, (1189), pp 299–314.Google Scholar
18. Ajaj, R.M, Friswell, M.I., Dettmer, W.G., Allegri, G. and Isikveren, A.T. Dynamic modelling and actuation of the adaptive torsion wing, J Int Material Systems and Structures, November 2013, 24, (16), pp 2045–2057.Google Scholar
19. Ajaj, R.M. Friswell, M.I., Dettmer, W.G., Allegri, G. and Isikveren, A.T. Performance and control optimisations using the adaptive torsion wing, Aeronaut J, October 2012, 116, (1184), pp 1061–1077.Google Scholar
20. Melin, T. A vortex lattice MATLAB implementation for linear aerodynamic wing applications, December 2000, Royal Institute of Technology (KTH).Google Scholar
21. Ajaj, R.M., Smith, D., Isikveren, A.T. and Friswell, M.I. A conceptual wing-box weight estimation model for transport aircraft, Aeronaut J, May 2013, 17, (1191), pp 533–551.Google Scholar
22. Smith, D.D., Ajaj, R.M., Isikveren, A.T. and Friswell, M.I. Multi-objective optimization for the multiphase design of active polymorphing wings, J Aircr, July-August 2012, 49, (4), pp 1153–1160.Google Scholar