Hostname: page-component-76d6cb85b7-mgxrv Total loading time: 0 Render date: 2026-07-23T06:35:35.818Z Has data issue: false hasContentIssue false
  • English
  • Français

Solid propellants burning enhancement using foil embedding method

Published online by Cambridge University Press:  03 February 2016

H. G. Darabkhanid  and
N. S. Mehdizadeh
H. G. Darabkhanid
Affiliation:
Aerospace Engineering Department, Amirkabir University of Technology, Centre of Excellence in Computational Aerospace Engineering, Tehran, Iran
N. S. Mehdizadeh
Affiliation:
Aerospace Engineering Department, Amirkabir University of Technology, Centre of Excellence in Computational Aerospace Engineering, Tehran, Iran
Get access Rights & Permissions [Opens in a new window]

Abstract

The method of metal embedding is widely employed in solid propellant motors with end-burning configuration, thereby significantly improving the burning rate of the propellants. In this study, the cylindrical foil embedding method is applied to double-base solid propellant, as a new method, and the effects of the type and thickness of the foil on the burning surface, as well as the burning rate, are experimentally investigated. It is shown that by using the foil embedding method, the burning characteristics of solid propellants can be improved. Results have been compared to some available data. To the best of the author’s knowledge there are no published data available on this method.

Information

Type
Research Article
Information
The Aeronautical Journal , Volume 112 , Issue 1138 , December 2008 , pp. 725 - 732
Copyright
Copyright © Royal Aeronautical Society 2008 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Rumbel, K.E., Cohen, M., Henderson, C.B. and Scurlock, A.C., A physical means of attaining high burning rate in solid propellants Eleventh Army-Navy-Air force Solid Propellant Meeting, Washington DC, USA, May 1955, p 155.Google Scholar
2. King, M.K., Analytical modelling of effects of wires on solid motor ballistics, J Propulsion, May-June 1991, 7, (3).Google Scholar
3. Gohari, H. and Seraj Mehdizadeh, N., Experimental Investigation of Foil Embedding Effect on Solid Propellant Burning, M. Sc. Thesis, February 2001, Amirkabir University of Technology, Iran.Google Scholar
4. Sahafiyan, A. and Afshani, M.E., Performance simulation of a dual thrust rocket motor International, Autumn Seminar on Propellants, Explosives and Pyrotechnics, 1, 2005, p 547, Beijing Institute of Technology, Beijing, China.Google Scholar
5. Caveny, L.H. and Glick, R.L., Influence of embedded metal fibers on solid propellant burning rate, J Spacecraft and Rockets, January 1967, 4, p 79.Google Scholar
6. Kubota, N., Ichida, M. and Fujisawa, T., Combustion processes of propellants with embedded metal wires, AIAA, January 1982, p 116, 20.Google Scholar