Hostname: page-component-89b8bd64d-rbxfs Total loading time: 0 Render date: 2026-05-10T05:40:47.742Z Has data issue: false hasContentIssue false
  • English
  • Français

Technical Note

A study of the temperatures achievable by expansion of high pressure gas

Published online by Cambridge University Press:  04 July 2016

S. R. Mohan  and
J. L. Stollery
S. R. Mohan
Affiliation:
College of Aeronautics, Cranfield Institute of Technology
J. L. Stollery
Affiliation:
College of Aeronautics, Cranfield Institute of Technology
Get access Rights & Permissions [Opens in a new window]

Extract

It was proposed in Ref. 1 that cryogenic temperatures can be achieved by the adiabatic isentropic expansion of a gas. The scheme is shown in Fig. 1. High pressure gas contained in A expands by means of valve 1 and cools. Valve 2 is then opened along with nozzle valve to push cold test gas through the working section.

In the ideal case the process is isentropic. To achieve reservoir conditions of T=120K and P = 4·4 bars, the initial pressure needed would be 110 bars. However, because of heat transfer from the walls of the tube, the process is not ideal and the actual initial pressure needed is higher. The main parameters which affect the heat transfer are the internal surface area of the tube, the rate of expansion governed by the size of valve 1 and the initial pressure of the gas.

Information

Type
Research Article
Information
The Aeronautical Journal , Volume 84 , Issue 835 , August 1980 , pp. 253 - 255
Copyright
Copyright © Royal Aeronautical Society 1980 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Stollery, J. L. and Murthy, A. V. An intermittent high Reynolds-number wind tunnel. Aeronautical Quarterly, Vol 28, pp 259, November 1977.Google Scholar
2. Edmundson, I. C. Unpublished work, (1979).Google Scholar
3. High Temperature Instruments. Bulletin 819TN, Robinson-Halpem Co, Pa, USA.Google Scholar
4. Carbon, M. W., Kutsch, H. J. and Hawkins, G. A., The response of thermocouples to rapid gas temperature changes. Transactions ASME, Vol 72, pp 655, July 1950.Google Scholar
5. Hurr, G. R. and East, R. A. Preliminary studies of a free-piston expander for an intermittent cryogenic wind tunnel. Proceedings, First International Symposium on Cryogenic Windtunnels, Paper 8, April 1979.Google Scholar
6. Scott, R. B. The calibration of thermocouples at low temperatures in Temperature its measurement and control in industry. Vol 1, pp 206, Reinhold Publishing Corporation, 1941.Google Scholar
7. Bellet, J. C. and Manson, N. Contribution a l’etude de l’air dans un reservoir. Publications scientifiques et techniques du ministere de l’air, 1962.Google Scholar