Hostname: page-component-76fb5796d-9pm4c Total loading time: 0 Render date: 2024-04-30T00:57:27.126Z Has data issue: false hasContentIssue false
  • English
  • Français

Adsorption Behavior of Asphaltene on Clay Minerals and Quartz in a Heavy Oil Sandstone Reservoir with Thermal Damage

Published online by Cambridge University Press:  01 January 2024

Yanlong He ,
Weizhe Niu ,
Zhanwu Gao ,
Hao Dong ,
Shizi An ,
Chunchun Han  and
Liang Zhao
Yanlong He*
Affiliation:
School of Petroleum Engineering, Xi'an Shiyou University, Xi'an 710065 Shaanxi, China Key Laboratory of Special Stimulation Technology for Oil and Gas Fields in Shaanxi Province, Xi'an 710065 Shaanxi, China
Weizhe Niu
Affiliation:
School of Petroleum Engineering, Xi'an Shiyou University, Xi'an 710065 Shaanxi, China Key Laboratory of Special Stimulation Technology for Oil and Gas Fields in Shaanxi Province, Xi'an 710065 Shaanxi, China
Zhanwu Gao
Affiliation:
PetroChina Changqing Oilfield Company, Xi'an 710016 Shaanxi, China
Hao Dong
Affiliation:
College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023 Hubei, China
Shizi An
Affiliation:
School of Petroleum Engineering, Xi'an Shiyou University, Xi'an 710065 Shaanxi, China Key Laboratory of Special Stimulation Technology for Oil and Gas Fields in Shaanxi Province, Xi'an 710065 Shaanxi, China
Chunchun Han
Affiliation:
The 3rd Oil Production Plant, PetroChina Qinghai Oilfield Company, Haixi 816400 Qinghai, China
Liang Zhao
Affiliation:
School of Petroleum Engineering, Xi'an Shiyou University, Xi'an 710065 Shaanxi, China Key Laboratory of Special Stimulation Technology for Oil and Gas Fields in Shaanxi Province, Xi'an 710065 Shaanxi, China
*
e-mail: stpnet@126.com
Get access Rights & Permissions [Opens in a new window]

Abstract

Differences in the properties of clay minerals cause formation damage under the condition of thermal production in heavy-oil reservoirs; asphaltenes adsorbed on clay minerals exacerbate the formation damage. The purpose of the present study was to reveal the variation in clay minerals and the adsorption behavior of asphaltenes on clay mineral surfaces under thermal recovery conditions. Volume changes and transformations of typical clay minerals were studied under various conditions (80 and 180°C, pH 9 and 11, aqueous and oven-dry conditions). On this basis, the adsorption behavior and mechanism of asphaltenes on the surfaces of clay minerals in various simulated conditions were investigated. The adsorption mechanism was revealed using kinetics and isothermal adsorption models. The results showed that the volume of montmorillonite expanded by up to 159.13% after water–rock interaction at 180°C with pH 11; meanwhile, the conversion rates of kaolinite and illite to montmorillonite were 6.6 and 7.8%, respectively. The water–rock interaction intensified the volume changes and transformations of clay minerals under thermal conditions. The amounts of asphaltene adsorbed on clay minerals at 180°C were greater than those at 80°C. The adsorption process of asphaltenes was inhibited under aqueous conditions. The abilities of the constituent minerals to bind asphaltenes was in order: montmorillonite > chlorite > kaolinite > illite > quartz sand. The adsorption process of asphaltenes yielded high coefficients of regression with both the Freundlich and Langmuir models under oven-dry (>0.99) and aqueous (>0.98) conditions. At 180°C under aqueous conditions, the water film significantly inhibited the adsorption of asphaltene on the clay minerals. The adsorption process of asphaltenes, therefore, could be regarded as the adsorption occurring at lower concentrations under oven-dry conditions.

Keywords

Adsorption kineticsAsphaltene adsorptionHigh-temperature steamIsothermal adsorption modelWater–rock interaction
Type
Original Paper
Information
Clays and Clay Minerals , Volume 70 , Issue 1 , February 2022 , pp. 120 - 134
Copyright
Copyright © The Author(s), under exclusive licence to The Clay Minerals Society 2022

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Adams, J. J. (2014). Asphaltene adsorption, a literature review. Energy & Fuels, 28(5), 2831–2856. https://doi.org/10.1021/ef500282pCrossRefGoogle Scholar
Afsar, C., & Akin, S. (2016). Solar generated steam injection in heavy oil reservoirs: A case study. Renewable Energy, 91, 83–89. https://doi.org/10.1016/j.renene.2016.01.047CrossRefGoogle Scholar
Al-Duri, B. (1995). A review in equilibrium in single and multi-component liquid adsorption systems. Reviews in Chemical Engineering, 11(2), 101–144. https://doi.org/10.1515/REVCE.1995.11.2.101CrossRefGoogle Scholar
Alagumuthu, G., & Rajan, M. (2010). Equilibrium and kinetics of adsorption of fluoride onto zirconium impregnated cashew nut shell carbon. Chemical Engineering Journal, 158(3), 451–457. https://doi.org/10.1016/j.cej.2010.01.017CrossRefGoogle Scholar
Baker, J. C., Grabowska-Olszewska, B., & Uwins, P. J. R. (1995). ESEM study of osmotic swelling of bentonite from Radzionkow (Poland). Applied Clay Science, 9(6), 465–469. https://doi.org/10.1016/0169-1317(95)00002-LCrossRefGoogle Scholar
Bantignies, J.-L., Dit Moulin, C. C., & Dexpert, H. (1997). Wettability contrasts in kaolinite and illite clays: Characterization by infrared and X-ray absorption spectroscopies. Journal de Physique IV France, 7(C2), 867–869. https://doi.org/10.1051/jp4:1997261Google Scholar
Bentabol, M., Ruiz Cruz, M. D., Huertas, F. J., & Linares, J. (2006). Chemical and structural variability of illitic phases formed from kaolinite in hydrothermal conditions. Applied Clay Science, 32(1–2), 111–124. https://doi.org/10.1016/j.clay.2005.12.003CrossRefGoogle Scholar
Bhaumik, R., Mondal, N. K., Das, B., Roy, P., Pal, K. C., Das, C., Baneerjee, A., & Datta, J. k. (2012). Eggshell powder as an adsorbent for removal of fluoride from aqueous solution: Equilibrium, kinetic and thermodynamic studies. Journal of Chemistry, 9(3), 1457–1480. https://doi.org/10.1155/2012/790401Google Scholar
Bradley, H. (1927). Adsorption isothermals. Nature, 120(3011), 82 https://www.nature.com/articles/120082a0.pdfCrossRefGoogle Scholar
China National Petroleum Corporation. (1995). X-ray diffraction analysis method for relative content of clay minerals in sedimentary rocks (Standard no. SY/T 5163-1995).Google Scholar
China Petrochemical Corporation. (1992). Determination of asphaltenes in crude oil (Standard no. SH/T 0266-1992).Google Scholar
Daughney, C. J. (2000). Sorption of crude oil from a non-aqueous phase onto silica: The influence of aqueous ph and wetting sequence. Organic Geochemistry, 31(2–3), 147–158. https://doi.org/10.1016/S0146-6380(99)00130-8CrossRefGoogle Scholar
Dean, K. R., & McAtee, J. L. Jr. (1986). Asphaltene adsorption on clay. Applied Clay Science, 1(4), 313–319. https://doi.org/10.1016/0169-1317(86)90008-6CrossRefGoogle Scholar
di Primio, R., Horsfield, B., & Guzman-Vega, M. A. (2000). Determining the temperature of petroleum formation from the kinetic properties of petroleum asphaltenes. Nature, 406, 173–176.CrossRefGoogle Scholar
Dong, X., Liu, H., Chen, Z., Wu, K., Lu, N., & Zhang, Q. (2019). Enhanced oil recovery techniques for heavy oil and oilsands reservoirs after steam injection. Applied Energy, 239, 1190–1211. https://doi.org/10.1016/j.apenergy.2019.01.244CrossRefGoogle Scholar
Dubey, S. T., & Waxman, M. H. (1991). Asphaltene adsorption and desorption from mineral surfaces. SPE Reservoir Engineering, 6(03), 389–395. https://doi.org/10.2118/18462-PACrossRefGoogle Scholar
Duran, J. A., Casas, Y. A., Xiang, L., Zhang, L., Zeng, H., & Yarranton, H. W. (2019). Nature of asphaltene aggregates. Energy & Fuels, 33(5), 3694–3710. https://doi.org/10.1021/acs.energyfuels.8b03057CrossRefGoogle Scholar
El-Khaiary, M. I., Malash, G. F., & Ho, Y.-S. (2010). On the use of linearized pseudo-second-order kinetic equations for modeling adsorption systems. Desalination, 257(1–3), 93–101. https://doi.org/10.1016/j.desal.2010.02.041CrossRefGoogle Scholar
Feng, D., Li, X., Wang, X., Li, J., Sun, F., Sun, Z., Zhang, T., Li, P., Chen, Y., & Zhang, X. (2018). Water adsorption and its impact on the pore structure characteristics of shale clay. Applied Clay Science, 155, 126–138. https://doi.org/10.1016/j.clay.2018.01.017CrossRefGoogle Scholar
Filipská, P., Zeman, J., Všianský, D., Honty, M., & Škoda, R. (2017). Key processes of long-term bentonite-water interaction at 90°C: Mineralogical and chemical transformations. Applied Clay Science, 150, 234–243. https://doi.org/10.1016/j.clay.2017.09.036CrossRefGoogle Scholar
Freundlich, H. (1935). Adsorptionstechnik. By Franz Krzil. Journal of Physical Chemistry, 40(6), 857–858. https://doi.org/10.1021/j150375a022CrossRefGoogle Scholar
Gonzalez, V., & Taylor, S. E. (2016). Asphaltene adsorption on quartz sand in the presence of pre-adsorbed water. Journal of Colloid and Interface Science, 480, 137–145. https://doi.org/10.1016/j.jcis.2016.07.014CrossRefGoogle Scholar
Herron, M. M. (1986). Mineralogy from geochemical well logging. Clays and Clay Minerals, 34(2), 204–213. https://doi.org/10.1346/CCMN.1986.0340211CrossRefGoogle Scholar
Hosseini-Dastgerdi, Z., & Meshkat, S. S. (2019). An experimental and modeling study of asphaltene adsorption by carbon nanotubes from model oil solution. Journal of Petroleum Science and Engineering, 174, 1053–1061. https://doi.org/10.1016/j.petrol.2018.12.024CrossRefGoogle Scholar
Hurst, A., & Archer, J. S. (1986). Sandstone reservoir description: An overview of the role of geology and mineralogy. Clay Minerals, 21(4), 791–809. https://doi.org/10.1180/claymin.1986.021.4.21CrossRefGoogle Scholar
Jafari Behbahani, T., Ghotbi, C., Taghikhani, V., & Shahrabadi, A. (2013). Asphaltene deposition under dynamic conditions in porous media: Theoretical and experimental investigation. Energy & Fuels, 27(2), 622–639. https://doi.org/10.1021/ef3017255CrossRefGoogle Scholar
Kar, T., Mukhametshina, A., Unal, Y., & Hascakir, B. (2015). The effect of clay type on steam-assisted-gravity-drainage performance. Journal of Canadian Petroleum Technology, 54(06), 412–423. https://doi.org/10.2118/173795-PACrossRefGoogle Scholar
Kashefi, S., Lotfollahi, M. N., & Shahrabadi, A. (2019). Asphaltene adsorption using nanoparticles with different surface chemistry: Equilibrium and thermodynamics studies. Petroleum Chemistry, 59, 1201–1206. https://doi.org/10.1134/S0965544119110124CrossRefGoogle Scholar
Kazempour, M., Sundstrom, E., & Alvarado, V. (2012). Geochemical modeling and experimental evaluation of high-pH floods: Impact of water-rock interactions in sandstone. Fuel, 92(1), 2016–2230. https://doi.org/10.1016/j.fuel.2011.07.022CrossRefGoogle Scholar
Kong, B., Wang, S., & Chen, S. (2017). Minimize formation damage in water-sensitive Montney formation with energized fracturing fluid. SPE Reservoir Evaluation & Engineering, 20(03), 562–571. https://doi.org/10.2118/179019-PACrossRefGoogle Scholar
Kord, S., Mohammadzadeh, O., Miri, R., & Soulgani, B. S. (2014). Further investigation into the mechanisms of asphaltene deposition and permeability impairment in porous media using a modified analytical model. Fuel, 117(A), 259–268. https://doi.org/10.1016/j.fuel.2013.09.038CrossRefGoogle Scholar
Kudrashou, V. Y., & Nasr-El-Din, H. A. (2020). Formation damage associated with mineral alteration and formation of swelling clays caused by steam injection in sandpacks. SPE Reservoir Evaluation & Engineering, 23(01), 326–344. https://doi.org/10.2118/195700-PACrossRefGoogle Scholar
Langmuir, I. (1932). Vapor pressures, evaporation, condensation and adsorption. Journal of the American Chemical Society, 54(7), 2798–2832. https://doi.org/10.1021/ja01346a022CrossRefGoogle Scholar
Lei, H., Yang, S., Qian, K., Chen, Y., Li, Y., & Ma, Q. (2015). Experimental investigation and application of the asphaltene precipitation envelope. Energy & Fuels, 29(11), 6920–6927. https://doi.org/10.1021/acs.energyfuels.5b01237CrossRefGoogle Scholar
Li, X., Bai, Y., Sui, H., & He, L. (2017). Understanding the liberation of asphaltenes on the muscovite surface. Energy & Fuels, 31(2), 1174–1181. https://doi.org/10.1021/acs.energyfuels.6b02278CrossRefGoogle Scholar
Lopes da Silva, M., Martins, J. L., Ramos, M. M., & Bijani, R. (2018). Estimation of clay minerals from an empirical model for cation exchange capacity: An example in Namorado oilfield, Campos Basin, Brazil. Applied Clay Science, 158, 195–203. https://doi.org/10.1016/j.clay.2018.02.040CrossRefGoogle Scholar
Mansoori Mosleh, F., Mortazavi, Y., Hosseinpour, N., & Khodadadi, A. A. (2020). Asphaltene adsorption onto carbonaceous nanostructures. Energy & Fuels, 34(1), 211–224. https://doi.org/10.1021/acs.energyfuels.9b03466CrossRefGoogle Scholar
Moreno-Arciniegas, L., & Babadagli, T. (2014). Optimal application conditions of solvent injection into oil sands to minimize the effect of asphaltene deposition: An experimental investigation. SPE Reservoir Evaluation & Engineering, 17(04), 530–546. https://doi.org/10.2118/165531-PACrossRefGoogle Scholar
Morodome, S., & Kawamura, K. (2009). Swelling behavior of Na-and Ca-montmorillonite up to 150°C by in situ X-ray diffraction experiments. Clays and Clay Minerals, 57, 150–160. https://doi.org/10.1346/CCMN.2009.0570202CrossRefGoogle Scholar
National Energy Administration. (2016). Shale expansion tester (Standard no. SY/T 7327-2016).Google Scholar
Pang, Z., Lyu, X., Zhang, F., Wu, T., Gao, Z., Geng, Z., & Luo, C. (2018). The macroscopic and microscopic analysis on the performance of steam foams during thermal recovery in heavy oil reservoirs. Fuel, 233(1), 166–176. https://doi.org/10.1016/j.fuel.2018.06.048CrossRefGoogle Scholar
Piro, G., Canonico, L. B., Galbariggi, G., Bertero, L., & Carniani, C. (1996). Asphaltene adsorption onto formation rock: An approach to asphaltene formation damage prevention. SPE Production & Facilities, 11(03), 156–160. https://doi.org/10.2118/30109-PACrossRefGoogle Scholar
Rogel, E. (2002). Asphaltene aggregation: A molecular thermodynamic approach. Langmuir, 18(5), 1928–1937. https://doi.org/10.1021/la0109415CrossRefGoogle Scholar
Sauer, K., Caporuscio, F., Rock, M., Cheshire, M., & Jové-Colón, C. (2020). Hydrothermal interaction of Wyoming bentonite and opalinus clay. Clays and Clay Minerals, 68, 144–160. https://doi.org/10.1007/s42860-020-00068-8CrossRefGoogle Scholar
Skipper, N. T., Sposito, G., & Chang, F.-R. C. (1995). Monte Carlo simulation of interlayer molecular structure in swelling clay minerals. 2. Monolayer hydrates. Clays and Clay Minerals, 43, 294–303. https://doi.org/10.1346/CCMN.1995.0430304CrossRefGoogle Scholar
Sudhakar, M. R., & Thyagaraj, T. (2007). Role of direction of salt migration on the swelling behaviour of compacted clays. Applied Clay Science, 38, 113–129. https://doi.org/10.1016/j.clay.2007.02.005Google Scholar
Wu, G., He, L., & Chen, D. (2013). Sorption and distribution of asphaltene, resin, aromatic and saturate fractions of heavy crude oil on quartz surface: Molecular dynamic simulation. Chemosphere, 92(11), 1465–1471. https://doi.org/10.1016/j.chemosphere.2013.03.057CrossRefGoogle ScholarPubMed
Yang, Y., Li, Y., Yao, J., Zhang, K., Iglauer, S., Luquot, L., & Wang, Z. (2019). Formation damage evaluation of a sandstone reservoir via pore-scale X-ray computed tomography analysis. Journal of Petroleum Science and Engineering, 183, 106356. https://doi.org/10.1016/j.petrol.2019.106356CrossRefGoogle Scholar
Zhao, D. W., Wang, J., & Gates, I. D. (2014). Thermal recovery strategies for thin heavy oil reservoirs. Fuel, 117(A), 431–441. https://doi.org/10.1016/j.fuel.2013.09.023CrossRefGoogle Scholar
Zhuang, Y., Liu, X., Xiong, H., & Liang, L. (2018). Microscopic mechanism of clay minerals on reservoir damage during steam injection in unconsolidated sandstone. Energy & Fuels, 32(4), 4671–4681. https://doi.org/10.1021/acs.energyfuels.7b03686CrossRefGoogle Scholar
Supplementary material: File

He et al. supplementary material
Download undefined(File)
File 7.9 MB
Supplementary material: File

He et al. supplementary material
Download undefined(File)
File 1.2 MB