Hostname: page-component-848d4c4894-hfldf Total loading time: 0 Render date: 2024-05-14T00:42:45.902Z Has data issue: false hasContentIssue false

ECR plasma source for heavy ion beam charge neutralization

Published online by Cambridge University Press:  22 July 2003

PHILIP C. EFTHIMION
Affiliation:
Plasma Physics Laboratory, Princeton University, Princeton, New Jersey
ERIK GILSON
Affiliation:
Plasma Physics Laboratory, Princeton University, Princeton, New Jersey
LARRY GRISHAM
Affiliation:
Plasma Physics Laboratory, Princeton University, Princeton, New Jersey
PAVEL KOLCHIN
Affiliation:
Plasma Physics Laboratory, Princeton University, Princeton, New Jersey
RONALD C. DAVIDSON
Affiliation:
Plasma Physics Laboratory, Princeton University, Princeton, New Jersey
SIMON YU
Affiliation:
Lawrence Berkeley National Laboratory, University of California, Berkeley, California
B. GRANT LOGAN
Affiliation:
Lawrence Berkeley National Laboratory, University of California, Berkeley, California

Abstract

Highly ionized plasmas are being considered as a medium for charge neutralizing heavy ion beams in order to focus beyond the space-charge limit. Calculations suggest that plasma at a density of 1–100 times the ion beam density and at a length ∼0.1–2 m would be suitable for achieving a high level of charge neutralization. An Electron Cyclotron Resonance (ECR) source has been built at the Princeton Plasma Physics Laboratory (PPPL) to support a joint Neutralized Transport Experiment (NTX) at the Lawrence Berkeley National Laboratory (LBNL) to study ion beam neutralization with plasma. The ECR source operates at 13.6 MHz and with solenoid magnetic fields of 1–10 gauss. The goal is to operate the source at pressures ∼10−6 Torr at full ionization. The initial operation of the source has been at pressures of 10−4–10−1 Torr. Electron densities in the range of 108 to 1011 cm−3 have been achieved. Low-pressure operation is important to reduce ion beam ionization. A cusp magnetic field has been installed to improve radial confinement and reduce the field strength on the beam axis. In addition, axial confinement is believed to be important to achieve lower-pressure operation. To further improve breakdown at low pressure, a weak electron source will be placed near the end of the ECR source. This article also describes the wave damping mechanisms. At moderate pressures (> 1 mTorr), the wave damping is collisional, and at low pressures (< 1 mTorr) there is a distinct electron cyclotron resonance.

Type
Research Article
Copyright
2003 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)