Hostname: page-component-848d4c4894-hfldf Total loading time: 0 Render date: 2024-05-24T17:38:06.301Z Has data issue: false hasContentIssue false
  • English
  • Français

Quenching operation of aluminum alloys: measurements and numerical simulations

Published online by Cambridge University Press:  06 October 2004

J. Gilles ,
B. Bourouga  and
A. Sorin
Get access

Abstract

The part-bath heat transfer coefficient during a quenching operation is particularly important in order to simulate the workpiece hardening. The estimation of this coefficient requires specific developments in the field of instrumentation. This paper presents an experimental methodology which was developed within the laboratory. Experimental results are compared to numerical simulations using a heat transfer coefficient obtained from experimental estimation. This comparative approach allows to validate the experimental methodology and also to ensure that the tested pieces are representative.

Type
Research Article
Information
Metallurgical Research & Technology , Volume 101 , Issue 9: Science et Génie des Matériaux , September 2004 , pp. 695 - 703
Copyright
© La Revue de Métallurgie, 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)