Hostname: page-component-cb9f654ff-5kfdg Total loading time: 0 Render date: 2025-08-04T11:13:26.321Z Has data issue: false hasContentIssue false

Electrochemical Studies and Images Performance ofLa2O3/TiO2 for EnergyStorage

Published online by Cambridge University Press:  13 January 2016

C.G. Nava-Dino*
Affiliation:
Universidad Autónoma de Chihuahua, Facultad de Ingeniería. Chihuahua, Circuito No 1., Campus Universitario 2 Chihuahua, Chih. C.P. 31125, México.
N.L. Mendez-Mariscal
Affiliation:
Universidad Autónoma de Chihuahua, Facultad de Ingeniería. Chihuahua, Circuito No 1., Campus Universitario 2 Chihuahua, Chih. C.P. 31125, México.
G. Llerar-Meza
Affiliation:
Universidad Autónoma de Chihuahua, Facultad de Ingeniería. Chihuahua, Circuito No 1., Campus Universitario 2 Chihuahua, Chih. C.P. 31125, México.
R.A. Acosta-Chavéz
Affiliation:
Universidad Autónoma de Chihuahua, Facultad de Ingeniería. Chihuahua, Circuito No 1., Campus Universitario 2 Chihuahua, Chih. C.P. 31125, México.
M.E. Lopéz-Ochoa
Affiliation:
Universidad Autónoma de Chihuahua, Facultad de Ingeniería. Chihuahua, Circuito No 1., Campus Universitario 2 Chihuahua, Chih. C.P. 31125, México.
J.P. Flores-De los Ríos
Affiliation:
Universidad Autónoma de Chihuahua, Facultad de Ingeniería. Chihuahua, Circuito No 1., Campus Universitario 2 Chihuahua, Chih. C.P. 31125, México.
A. Martínez-Villafañe
Affiliation:
Departamento de Integridad y Diseño de Materiales Compuestos. Centro de Investigación en Materiales Avanzados. S.C. CIMAV. Miguel de Cervantes No 120 Complejo Industrial Chihuahua, C.P 31109, Chihuahua, Chih. México
*
*(Email: ndino@uach.mx)
Get access

Abstract

Powders of La2O3 were mixed with mechanical ball-millingtechnique (MA) adding TiO2, to improve the electrochemicalperformance as a storage material. Microstructures, morphologies andelectrochemical results were investigated using TEM, X-ray diffraction (XRD),Cyclic Voltammetry and Potentiodynamic studies. Results showed that, the sampleswith TiO2 content affected the capacity of response. The alloysexhibit a superior capacity and stability adding TiO2. The millingball to powder weight ratio was kept 5 to 1 for all experimental runs. Millingintervals were 0, 2 and 4 hrs; using alternate cycles of 30 minutes milling and30 min resting. The nanostructure TiO2 powder, improves the samplesto design a better electrode. TiO2 has significant influence onelectrochemical performance of electrodes. Electrochemical experiments wereperformed on ACM Instruments Gill AC and a typical three electrode setup wasconstructed to measure the electrochemical properties of the working electrode.Here, platinum was used as the counter electrode and calomel was used as thereference electrode. Structures of the samples were analyzed by digital imagetools.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

Nava-Dino, C.G., Bautista-Margulis, R.G., Neri-Flores, M.A., Borunda-Terrazas, A., López-Ocaña, G., Mendez-Mariscal, N.L., Chacón-Nava, J.G., Martínez-Villafañe, A., “Electrochemical Performance of La2O3 /TiO2 and Effects of Ball Milling”, Int. J. Electrochem. Sci., 10 (2015) 1078110791.Google Scholar
Reiss, Martin A., Sabathiel, Nikolaus, Ahammer, Helmut, “Noise dependency of algorithms for calculating fractal dimensions in digital images”, Chaos, Solitons and Fractals 78 (2015) 3946.Google Scholar
Ying, Liu, Jiangli, Lin, Ke, Chen, “A Stable Algorithm of Box Fractal Dimension and Its Application in Pore Structure”, Rare Metal Materials and Engineering, (2015), 44(4): 08000804.Google Scholar
Meksi, Manel, Turki, Asma, Kochkar, Hafedh, Bousselmi, Latifa, Guillard, Chantal, Berhault, Gilles, “The role of lanthanum in the enhancement of photocatalyticproperties of TiO2nanomaterials obtained by calcination ofhydrogenotitanate nanotubes” Applied Catalysis B: Environmental 181 (2016) 651660 CrossRefGoogle Scholar
Patil, Swati J., Lokhande, Chandrakant D., “Fabrication and performance evaluation of rare earth lanthanum sulfide film for supercapacitor application: Effect of air annealing”, Materials and Design 87 (2015) 939948.CrossRefGoogle Scholar
Lihui, Zhang, Feng, Duan, Yaji, Huang, Chiensong, Chyang, “Effect of calcium magnesium acetate on the forming property and fractal dimension of sludge pore structure during combustion”, Bioresource Technology 197 (2015) 235243.Google Scholar
Dobrescu, G., Papa, F., State, R., Fangli, I., Balint, I., “Particle size distribution of Pt–Cu bimetallic nanoparticles by fractal analysis”, Powder Technology 269 (2015) 532540 Google Scholar
Yang, Yunchuan, Wang, Liang, Feng, Yan, “Research on fractal dimensions of particles and their relationships”, Powder Technology (2015), doi: 10.1016/j.powtec.2015.10.050.Google Scholar
Referenced from http://imagej.nih.gov/ij/features.html, on November 21st 2015.Google Scholar
Gupta, Sapna, Zhong, Yu, Mahapatra, Manoj, Singh, Prabhakar, “Processing and electrochemical performance of manganese-doped lanthanum-strontium chromite in oxidizing and reducing atmospheres”, international journal of hydrogen energy 4 0 (2015) 13479 e1 3489.Google Scholar