Hostname: page-component-7dd5485656-bt4hw Total loading time: 0 Render date: 2025-10-31T03:16:38.695Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and Performance of Inkjet Print Heads for Non-Graphic-Arts Applications

Published online by Cambridge University Press:  31 January 2011

Linda T. Creagh  and
Marlene McDonald
Get access

Abstract

Inkjet print heads have become the dominant printing element for home and office printers; they have been a key driver forthe digitization of wide-format graphic arts printing and other printing areas as diverse as addressing and carton coding. In the past few years, inkjet print heads have begun to have an impact in areas outside the graphics arts. In these applications, the inkjet print head may be considered a manufacturing tool; this implies that it will differ in design depending on the application. Also, standards forreliability, consistency, and dependability will differ from those in graphic arts areas. Even though non-graphic-arts applications differ widely in their details, there are general considerations in terms of the systems that are required. Each nontraditional application has specific goals for manufacturing, and a unique inkjet print head designed to meet these goals may be required. This article focuses on a specific piezo-based inkjet print head that has been engineered to meet the manufacturing requirements for flat-panel displays basedon light-emitting polymeric materials.

Keywords

inkjet printinglight-emitting polymer (LEP) displaysprint heads

Information

Type
Research Article
Information
MRS Bulletin , Volume 28 , Issue 11: Inkjet Printing of Functional Materials , November 2003 , pp. 807 - 811
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Frost, P.J., presented at 26th Annu. Global Ink Jet and Thermal Printing Conf., Amsterdam, March 20–21, 2003.Google Scholar
2.Mironov, , Boland, , Markwald, , Trusk, , and Forgass, , as quoted at www.thetigernews.com, July 21, 2003.CrossRefGoogle Scholar
3.Yoshioka, Y., Jabbour, G., and Calvert, P., in Proc. NIP18: The 18th Int. Congress on Digital Printing Technologies (Society for Imaging Science and Technology, Springfield, VA, 2003) p. 223.Google Scholar
4.Branthwaite, G., “Ink Jet Printing for Circuit Board Manufacture,” presented at the Information Management Institute (IMI) 1st Digital Electronic Materials Deposition Conf., Palm Springs, CA, October 14–16, 2002.Google Scholar
5.McLean, T., “Markets for Plastic Electronics,” presented at the Information Management Institute (IMI)1st Digital Electronic Materials Deposition Conf., Palm Springs, CA, October 14–16, 2002.Google Scholar
6.Kodas, T.T., “Challenges in the Formulation of Electronic Materials Suitable for Digital Deposition,” presented at the Information Management Institute (IMI) 1st Digital Electronic Materials Deposition Conf., Palm Springs, CA, October 14–16, 2002.Google Scholar
7. For example, the Advanced Technology Workshops on Printing an Intelligent Future (2002 and 2003) sponsored by the International Microelectronics and Packaging Society.Google Scholar
8.Evans, S.M., “A Disruptive Printing-Based Technology for Flexible Displays and Plastic Electronics,” presented at the USDC Flexible Microelectronics and Displays Workshop, Phoenix, AZ, February 4, 2003.Google Scholar
9.Hayes, D., “Inkjet Printing of Electronics,” presented at IMAPS Printing an Intelligent Future 2003, Boston, MA, March 16–19, 2003.Google Scholar
10.Pinnel, R., opening remarks, USDC Flexible Microelectronics and Displays Conf., Phoenix, AZ, February 3–4, 2003.Google Scholar
11.Edwards, C., in SID Int. Symp. Dig. of Tech. Papers 32 (2001) p. 1049.CrossRefGoogle Scholar
12.Creagh, L.T., Heun, S., and Tallant, N., “Development of Improved Inkjet Deposition Processes for Polymer OLED Materials,” presented at the 7th Asian Symposium on Information Display Int. Conf., Singapore, September 2–4, 2002.Google Scholar
13.McDonald, M., “High-Precision Jetting and Dispensing Applications Using A Piezoelectric Micropump,” presented at NIP19: The 19th Int. Congress on Digital Printing Technologies, New Orleans, LA, October 2003.CrossRefGoogle Scholar
14.Hasenbein, R., presented at NIP18: The 18th Int. Congress on Digital Printing Technologies, San Diego, CA, October 2002, paper No. 1071.Google Scholar
15.McDonald, M., Heun, S., and Tallant, N., “Advances in Piezoelectric Deposition of Organic Electronic Materials,” presented at NIP18: The 18th Int. Congress on Digital Printing Technologies, San Diego, CA, October 2002.CrossRefGoogle Scholar
16.Haskal, E.I. et al., in SID Int. Symp. Dig. of Tech. Papers 33 (2002) p. 776.CrossRefGoogle Scholar
17.Creagh, L.T., Huen, S., and Tallant, N., ”Re-cent Advances in Deposition of OLEP Materials via Piezoelectric Inkjet,” presented at the International Display Manufacturing Conf., Taipei, Taiwan, February 18–21, 2003.Google Scholar
18.Tallant, N., Steiger, J., Tallant, N., and Huen, S., “Polymer Light-Emitting Diodes Made by Inkjet Printing,” presented at NIP18: The 18th Int. Congress on Digital Printing Technologies, San Diego, CA, October 2002.CrossRefGoogle Scholar
19. Philips CFT Optical Measuring System, Philips Centre for Industrial Technology, http://www.cft.philips.com/industrialvision/focus/ (accessed September 2003).Google Scholar