Skip to main content Accessibility help
×
Home

Imperfect architected materials: Mechanics and topology optimization

  • Damiano Pasini (a1) and James K. Guest (a2)

Abstract

This article examines two intertwined topics on architected materials with imperfections—their mechanics and optimum design. We first discuss the main factors that control defect sensitivity along with a range of strategies for defect characterization. The potency of both as-designed and as-manufactured defects on their macroscopic response is highlighted with an emphasis on those caused by additive manufacturing technology. As a natural extension of defect sensitivity, we describe the design approaches for architected materials with particular focus on systematic tools of topology optimization. Recent extensions to formally incorporate imperfections in the optimization formulation are discussed, where the ultimate goal is to generate architectures that are flaw-tolerant and perform robustly in the presence of imperfections. We conclude with an outlook on the field, highlighting potential areas of future research.

Copyright

References

Hide All
1.Gibson, L.J., Ashby, M.F., Cellular Solids: Structure and Properties, 2nd ed. (Cambridge University Press, Cambridge, UK, 1997).
2.Deshpande, V.S., Ashby, M.F., Fleck, N.A., Acta Mater . 49, 1035 (2001).
3.Deshpande, V.S., Fleck, N.A., Ashby, M.F., J. Mech. Phys. Solids 49, 1747 (2001).
4.Sigmund, O., Int. J. Solids Struct. 31, 2313 (1994).
5.Coulais, C., Sabbadini, A., Vink, F., van Hecke, M., Nature 561, 512 (2018).
6.Liu, L., Kamm, P., García-Moreno, F., Banhart, J., Pasini, D., J. Mech. Phys. Solids 107, 160 (2017).
7.Bauer, J., Schroer, A., Schwaiger, R., Kraft, O., Nat. Mater. 15, 438 (2016).
8.Meza, L.R., Das, S., Greer, J.R., Science 345, 1322 (2014).
9.Guest, J.K., Igusa, T., Comput. Methods Appl. Mech. Eng. 198, 116 (2008).
10.Sigmund, O., Acta Mech. Sin. 25, 227 (2009).
11.Andreassen, E., Lazarov, B.S., Sigmund, O., Mech. Mater. 69, 1 (2014).
12.Zhao, L., Ha, S., Sharp, K.W., Geltmacher, A.B., Fonda, R.W., Kinsey, A.H., Zhang, Y., Ryan, S.M., Erdeniz, D., Dunand, D.C., Hemker, K.J., Guest, J.K., Weihs, T.P., Acta Mater . 81, 326 (2014).
13.Lin, S., Zhao, L., Guest, J.K., P Weihs, T., Liu, Z., J. Mech. Des. 137, 081402 (2015).
14.Arabnejad, S., Burnett Johnston, R., Pura, J.A., Singh, B., Tanzer, M., Pasini, D., Acta Biomater. 30, 345 (2016).
15.Melancon, D., Bagheri, Z., Johnston, R., Liu, L., Tanzer, M., Pasini, D., Acta Biomater . 63, 350 (2017).
16.Maggi, A., Li, H., Greer, J.R., Acta Biomater. 63, 294 (2017).
17.Moussa, A., Tanzer, M., Pasini, D., J. Mech. Behav. Biomed. Mater. 85, 134 (2018).
18.Bagheri, Z.S., Melancon, D., Liu, L., Johnston, R.B., Pasini, D., J. Mech. Behav. Biomed. Mater. 70, 17 (2017).
19.Mueller, J., Shea, K., Mater. Today Commun. 17, 69 (2018).
20.Symons, D.D., Fleck, N.A., J. Appl. Mech. 75, 051011 (2008).
21.Chen, C., Lu, T.J., Fleck, N.A., Int. J. Mech. Sci. 43, 487 (2001).
22.Simone, A.E., Gibson, L.J., Acta Mater . 46, 2139 (1998).
23.Gan, Y.X., Chen, C., Shen, Y.P., Int. J. Solids Struct. 42, 6628 (2005).
24.Ronan, W., Deshpande, V.S., Fleck, N.A., Int. J. Solids Struct. 102, 200 (2016).
25.Gross, A., Pantidis, P., Bertoldi, K., Gerasimidis, S., J. Mech. Phys. Solids 124, 577 (2019).
26.Chen, C., Lu, T.J., Fleck, N.A., J. Mech. Phys. Solids 47, 2235 (1999).
27.Tankasala, H.C., Deshpande, V.S., Fleck, N.A., J. Mech. Phys. Solids 109, 307 (2017).
28.Fleck, N.A., Qiu, X., J. Mech. Phys. Solids 55, 562 (2007).
29.Romijn, N.E.R., Fleck, N.A., J. Mech. Phys. Solids 55, 2538 (2007).
30.Ferrigno, A., Di Caprio, F., Borrelli, R., Auricchio, F., Vigliotti, A., Materialia 5, 100232 (2019).
31.Dallago, M., Winiarski, B., Zanini, F., Carmignato, S., Benedetti, M., Int. J. Fatigue 124, 348 (2019).
32.Bendsøe, M.P., Kikuchi, N., Comput. Methods Appl. Mech. Eng. 71, 197 (1988).
33.Sigmund, O., J. Mech. Phys. Solids 48, 397 (2000).
34.Challis, V.J., Roberts, A.P., Wilkins, A.H., Int. J. Solids Struct. 45, 4130 (2008).
35.Sigmund, O., Torquato, S., Appl. Phys. Lett. 69, 3203 (1996).
36.Andreassen, E., Optimal Design of Porous Materials (DTU Mechanical Engineering, 2015).
37.Challis, V.J., Guest, J.K., Grotowski, J.F., Roberts, A.P., Int. J. Solids Struct. 49, 3397 (2012).
38.Osanov, M., Guest, J.K., Annu. Rev. Mater. Res. 46, 211 (2016).
39.Vigliotti, A., Deshpande, V.S., Pasini, D., J. Mech. Phys. Solids 64, 44 (2014).
40.Jalalpour, M., Igusa, T., Guest, J.K., Int. J. Solids Struct. 48, 3011 (2011).
41.Schevenels, M., Lazarov, B.S., Sigmund, O., Comput. Methods Appl. Mech. Eng. 200, 3613 (2011).
42.Jansen, M., Lombaert, G., Schevenels, M., Comput. Methods Appl. Mech. Eng. 285, 452 (2015).
43.Chen, S., Chen, W., Lee, S., Struct. Multidiscipl. Optim. 41, 507 (2010).
44.Tootkaboni, M., Asadpoure, A., Guest, J.K., Comput. Methods Appl. Mech. Eng. 201–204, 263 (2012).

Imperfect architected materials: Mechanics and topology optimization

  • Damiano Pasini (a1) and James K. Guest (a2)

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed