Hostname: page-component-7c8c6479df-24hb2 Total loading time: 0 Render date: 2024-03-28T21:38:33.546Z Has data issue: false hasContentIssue false

Particle-free silver ink prints small, high-performance electronics

Published online by Cambridge University Press:  12 March 2012

Abstract

Type
Other
Copyright
Copyright © Materials Research Society 2012

University of Illinois at Urbana-Champaign (UIUC) materials scientists have developed a reactive silver ink for printing high-performance electronics on ubiquitous, low-cost materials such as flexible plastic, paper, or fabric substrates. Jennifer Lewis, the Hans Thurnauer Professor of Materials Science and Engineering and director of the Frederick Seitz Materials Research Laboratory, and graduate student S. Brett Walker described the new ink in the January 25 issue of the Journal of the American Chemical Society (DOI: 10.1021/ja209267c; p. 1419).

Most conductive inks rely on tiny metal particles suspended in a solvent. The new ink is formed from a transparent solution of silver acetate and ammonia through a modified Tollens’ process. The silver remains dissolved in the solution until it is printed, and the liquid evaporates, yielding conductive features. The ink is composed of 22 wt% silver, comparable to other silver-precursor-based inks.

“It dries and reacts quickly, which allows us to immediately deposit silver as we print,” Walker said.

The reactive ink has several advantages over particle-based inks. It is much faster to make: a batch takes minutes to mix, according to Walker, whereas particle-based inks take several hours and multiple steps to prepare. The ink is also stable for several weeks.

The reactive silver ink can print through 100-nm nozzles, an order of magnitude smaller than for particle-based inks, an important feature for printed microelectronics. Moreover, the ink’s low viscosity makes it suitable for inkjet printing, direct ink writing, or airbrush spraying over large, conformal areas.

“For printed electronics applications, you need to be able to store the ink for several months because silver is expensive,” Walker said. “Since silver particles don’t actually form until the ink exits the nozzle and the ammonia evaporates, our ink remains stable for very long periods. For fine-scale nozzle printing, that’s a rarity.”

The reactive silver ink boasts yet one more key advantage: a low processing temperature. Metallic inks typically need to be heated to achieve bulk conductivity through a process called annealing. The annealing temperatures for many particle-based inks are too high for many inexpensive plastics or paper. By contrast, the reactive silver ink exhibits an electrical conductivity approaching that of bulk silver upon annealing at 90°C.

“We are now focused on patterning large-area transparent conductive surfaces using this reactive ink,” said Lewis, who is also affiliated with the Beckman Institute for Advanced Science and Technology, the Micro and Nanotechnology Lab, and the Department of Chemical and Biomolecular Engineering at UIUC.

Reactive silver ink is airbrushed onto a thin, stretchy plastic film to make a flexible silver electrode. Photo by S. Brett Walker