Hostname: page-component-cb9f654ff-c75p9 Total loading time: 0 Render date: 2025-08-05T14:32:53.828Z Has data issue: false hasContentIssue false
  • English
  • Français

Exfoliation of MoS2 Catalysts: Structural and Catalytic Changes

Published online by Cambridge University Press:  15 February 2011

M. Del Valle ,
M. Avalos-Borja ,
J. Cruz  and
S. Fuentes
M. Del Valle
Affiliation:
Centro de Investigación Cientifica y de Educación Superior de Ensenada, Ensenada, B. C., Mexico, and UABC, Department of Chemistry, Tijuana, B. C., México
M. Avalos-Borja
Affiliation:
Instituto de Fisica-UNAM, Apdo. Postal 2681, Ensenada, B. C., 22800, México
J. Cruz
Affiliation:
UABC, Department of Chemistry, Tijuana, B. C., México
S. Fuentes
Affiliation:
Instituto de Fisica-UNAM, Apdo. Postal 2681, Ensenada, B. C., 22800, México
Get access

Abstract

A study of the microstructural differences between exfoliated and non-exfoliated MoS2-based materials is presented, relating them to differences in their catalytic activity. Both commercial (crystalline) MoS2 and molybdenum sulfide catalysts prepared by thiosalt decomposition are subjected to chemical exfoliation reported to separate MoS2 monolayers from the original structure. Electron microscopy results show that the chemical treatment yields non-typical MoS2 nanostructures. Average surface area is also modified by exfoliation. The thiophene HDS activity of commercial MoS2 increases after exfoliation, while it decreases after exfoliation in the case of MoS2 catalysts.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 351: Symposium V – Molecularly Designed Ultrafine/Nanostructured Materials , 1994 , 287
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Tanaka, K. and Okuhara, T., Proc. III Int. Conf. on the Chem. and Uses of Molybdenum, Ed. Molybdenum, Climax, p. 170, 1979.Google Scholar
2. Bahl, O.P., Evans, L. and Thomas, J.M., Proc. Roy. Soc. A, 53, 306 (1983).Google Scholar
3. Roxlo, C.B., Daage, M., Rupert, A.F. and Chianelli, R.R., J. Catal., 100, 176 (1986).Google Scholar
4. Salmeron, M., Somorjai, G.A., Wold, A., Chianelli, R.R. and Liang, K.S., Chem. Phys. Lett., 90, 105 (1983).Google Scholar
5. Farias, M.H., Gelman, A.J., Chianelli, R.R. and Liang, K.S., Surf. Sci., 181, 140 (1984).Google Scholar
6. Tauster, S.J., Pecoraro, T.A. and Chianelli, R.R., J. Catal., 63, 515 (1980).Google Scholar
7. Wambeke, A., Jalowiecki, L., Kasztelan, S., Grimblot, J. and Bonnelle, J.P., J. Catal., 109, 320 (1988).Google Scholar
8. Kasztelan, S., Toulhoat, H., Grimblot, J. and Bonnelle, J.P., Bull. Soc. Chim. Belg., 93, 807 (1984).Google Scholar
9. Kemp, R.A., Ryan, R.C. and Smegal, J.A. in “Proc. IX nt. Congr. on Catalysis” edited by Phillips, M.J. and Ternan, M., The Chemical Institute of Canada, vol 1, Ottawa, 1988, p. 74.Google Scholar
10. Eijsbouts, S., Heinerman, J.J.L. and Elzerman, H.J.W., Appl. Catal. A, 105, 53 (1993).Google Scholar
11. Divigalpitiya, W.M.R., Frindt, R.F. and Morrison, S.R., Appl. Surf. Sci., 48, 572 (1991).Google Scholar
12. Joensen, P., Frindt, R.F. and Morrison, S.R., Mat. Res. Bull., 21, 457 (1986).Google Scholar
13. Weisser, O. and Landa, S., in “Sulfide Catalyst: Their Properties and Applications” Pergamon, Oxford, 1973.Google Scholar
14. Vazquez, A., Dominguez, J.M., Pifia, C., Jaidar, A. and Fuentes, S., J. Mat. Sci. Lett., 9, 712 (1990).Google Scholar
15. Yacamán, M.J. and Ocafia, T., Phys. Stat. Sol. A, 42, 571 (1977).Google Scholar
16. Liang, K.S., Chianelli, R.R., Chien, F.Z. and Moss, S.C., J. non Cryst. Sol., 79, 251 (1981).Google Scholar
17. Cruz-Reyes, J., Avalos-Borja, M., Farias, M.H. and Fuentes, S., J.Catal., 137, 232 (1992).Google Scholar
18. Divigalpitiya, W.M.R., Morrison, S.R. and Frindt, R.F., Thin Solid Films, 186, 177 (1990).Google Scholar
19. Divigalpitiya, W.M.R., Frindt, R.F. and Morrison, S.R., J. Mat. Res., 6, 1103 (1991).Google Scholar
20. Frindt, R.F., Arrott, A.S., Curzon, A.E., Heinrich, B., Morrison, S.R., Templeton, T.L., Divigalpitiya, W.M.R., Gee, M.A., Joensen, P., Schurer, P.J. and Lacombe, J.L., J. Appl. Phys., 70, 6224 (1991).Google Scholar