Hostname: page-component-54dcc4c588-hp6zs Total loading time: 0 Render date: 2025-09-11T14:07:34.835Z Has data issue: false hasContentIssue false
  • English
  • Français

Near Field Performance of the Advanced Cold Process Canister

Published online by Cambridge University Press:  28 February 2011

Lars O. Werme  and
Jukka-Pekka Salo
Lars O. Werme
Affiliation:
Swedish Nuclear Fuel and Haste Management Co, Box 5864, S-102 48 Stockholm, Sweden
Jukka-Pekka Salo
Affiliation:
Teollisuuden Voima Oy, Fredrikinkatu 51-53, SF-00100 Helsinki, Finland
Get access

Abstract

A near-field performance evaluation of an advanced cold process canister for spent nuclear fuel has been performed jointly by TVO, Finland and SKB, Sweden. The canister consists of a carbon steel canister as a load bearing element, with an outer corrosion shield of copper. The canister design was originally designed by TVO. In the analysis, internal (ie corrosion processes from the inside of the canister) as well as external processes (mechanical and chemical) have been considered both prior to and after canister breach. Throughout the analysis, present day underground conditions have been assumed to persist during the service life of the canister.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 212: Symposium P – Scientific Basis for Nuclear Waste Management XIV , 1990 , 343
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Raiko, H. and Salo, J-P., An Advanced Cold Process Canister Design for Nuclear Waste Disposal, this conference.Google Scholar
2. Marsh, G.P., A preliminary assessment of the advanced cold process canister, Report AEA Industrial Technology AEA-In Tec-0011, 1990.Google Scholar
3. Henshaw, J., Hoch, A., and Sharland, S.M., Further assessment studies of the advanced cold process canister, Report AEA Decommissioning & Radwaste AEA-D&R 0060, 1990.Google Scholar
4. Wanner, H., Modelling interaction of deep groundwaters with bentonite and radionuclide speciation, Nagra Technical Report 86–21, 1986.Google Scholar
5. The Swedish Corrosion institute and its Reference Group, Corrosion Resistance of a Copper Canister for Spent Nuclear Fuel, SKBF/KBS Technical Report 83–24, 1983.Google Scholar
6. Börgesson, L., Scenario of SKB/TVO-Canlster with Special Respect to the Effects of Bentonite Intrusion into the Canister, SKB Work Report AR 90–31, 1990.Google Scholar
7. Börgesson, L., Some Aspects of the Water Intrusion Scenario for the Advanced Cold Process Canister, SKB Work Report AR 90–12, 1990.Google Scholar
8. Pusch, R., Ranhagen, L. and Nilsson, K., Gas Migration through MX-80 Bentonite, Nagra Technical Report 85–36, 1985.Google Scholar
9. Pusch, P., Behavior of Hydrogen Gas in Deposition Holes and its Dissipation through Confining Rock - Application to the KBS-3 Repository Design, SKB Work Report AR 90–25, 1990.Google Scholar
10. Christensen, H. and Bjergbakke, E., Radiolysis of Groundwater from Spent Fuel. Stored According to the WP-Cave Concept, SKB Work Report 87–21, 1987.Google Scholar
11. Tait, J.C. and Johnson, L.H., Computer Modelling of Alpha-Radiolvsis of Aqueous Solutions in Contact with Used UO2 Fuel, Proceedings of 2nd International Conference on Radioactive Waste Management, Canadian Nuclear Society, p. 611, 1986.Google Scholar
12. Werme, L.O., Sellin, P. and Forsyth, R.S., Radiolvticallv Controlled Oxidative Dissolution of Spent Nuclear Fuel, SKB Technical Report 90–08, 1990.Google Scholar