Hostname: page-component-76fb5796d-25wd4 Total loading time: 0 Render date: 2024-04-28T21:56:13.147Z Has data issue: false hasContentIssue false

The Possibilities of Material Processing by Intense Millimeter - Wave Radiation

Published online by Cambridge University Press:  28 February 2011

YU. V. Bykov
Affiliation:
Institute of Applied Physics of Academy of Sciences,Uljanov Street 46, 603600 Gorky, USSR
A.F L. Gol'denberg
Affiliation:
Institute of Applied Physics of Academy of Sciences,Uljanov Street 46, 603600 Gorky, USSR
V. A. Flyagin
Affiliation:
Institute of Applied Physics of Academy of Sciences,Uljanov Street 46, 603600 Gorky, USSR
Get access

Abstract

1. Powerful sources of millimeter wavelength (MMW) radiation are developed nowadays for plasma investigation, particularly for thermonuclear plasma heating. Powerful oscillators for plasma heating - gyrotrons - at wavelengths down to 2 mm with output of several hundreds kilowatt at CW operation and over 1 MW at pulsed operation (pulse duration up to `1 s) are created or being created.1 The existence of CW multi kilowatt gyrotrons allows for new possibilities for material processing. The MMW range is situated at the end of the microwave range close to infrared and naturally allows applications either in the multimode microwave-oven manner or in the form of wave beam energy fluxes similar to laser radiation. Gyrotrons are close to technological lasers from the view-point of high flux densities up to `106W/cm2. By their efficiency (`40%), gyrotrons are among the most effective electromagnetic devices and significantly exceed technological lasers in efficiency as well as in CW outputs. So gyrotrons can be used for various material transformation processes requiring great amounts of energy such as plasma chemistry2 and processing of solid materials.

Type
Research Article
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Flyagin, V. A. and Nusinovich, O. S., Proc. IEEE (6), 644, (1988).Google Scholar
Gol'denberg, A. L. and Litvak, A. G. in Proc. of Int. Conf. on Plasma Physics, (Lausanne, 1984), 2. p. 665.Google Scholar
Bykov, Yu. V., Khimija Vysokikh Energii (4), 347, (1984).Google Scholar
Bykov, Yu. V., in The Third Session of Meeting onl Production. Investigation and Anolication Plasma in UHF Fields (Irkutsk. USSR. 1989), p. 29.Google Scholar
Bykov, Yu. V. and Eremeev, A. G., in High-frequency Discharge in Wave Fields, edited by Litvak, A. O. (Inst. of Applied Physics Academy of Sciences, Gorky, 1988), p. 265.Google Scholar
Konov, K. J. in Laser and Apnglication, (Bucharest. 1982). pt. 1. p. 665.Google Scholar