Hostname: page-component-54dcc4c588-xh45t Total loading time: 0 Render date: 2025-10-05T09:46:03.398Z Has data issue: false hasContentIssue false
  • English
  • Français

The Production of Metastable Metallic Particles Directly from the Mineral Concentrate By In-Flight Plasma Reduction

Published online by Cambridge University Press:  15 February 2011

J.J. Moore ,
K.J. Reid  and
J.M. Sivertsen
J.J. Moore
Affiliation:
Mineral Resources Research Center, University of Minnesota, 56 East River Road, Minneapolis, MN 55455;
K.J. Reid
Affiliation:
Mineral Resources Research Center, University of Minnesota, 56 East River Road, Minneapolis, MN 55455;
J.M. Sivertsen
Affiliation:
Chemical Engineering & Materials Science, University of Minnesota, 421 Washington Avenue S.E., Minneapolis, MN 55455
Get access

Abstract

Combining the reduction of the mineral oxide to a liquid metal and its rapid solidification provides an energetically favorable route tod provide metastable metallic particles or powders. Such an option is available with the Sustained Shockwave Plasma (SSP) reactor in which the mineral oxide is reduced using a carbon-based reductant within the plasma medium and subsequently rapidly solidified. This paper examines the degree of metastability of these metal particles using optical, electron and Auger microscopy and discusses the potential of this processing route.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 30: Symposium L – Plasma Processing and Synthesis of Materials I , 1983 , 117
Copyright
Copyright © Materials Research Society 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Machlin, E.S., Rowland, T.J., Eds., “Synthesis and Properties of Metastable Phases,” pub. TMS-AIME, Warrendale, PA (1980).Google Scholar
2. Berkowitz, B.J., Scattergood, R.O., Eds., “Chemistry and Physics of Rapidly Solidified Materials,” pub. TMS-AIME, Warrendale, PA (1982).Google Scholar
3. Maske, K.U., Moore, J.J., “The Application of Plasmas to High Temperature Reduction Metallurgy,” High Temperature Technology (August 1982).Google Scholar
4. Tylko, J.K. to Plasma Holdings, N.V., UK Patent No. 1,390,351–3.Google Scholar
5. Moore, J.J., Tylko, J.K., Reid, K.J., “Reduction of Lean Chromite Ore in a New Type Plasma Reactor,” Proceedings Extractive Metallurgy of Refractory Metals, TMS-AIME, Chicago, 377–417 (1981).Google Scholar
6. Reid, K.J., Moore, J.J., Tylko, J.K., “In-Flight Metal Extraction in a Novel Plasma Reactor,” to be published in Proceedings of Symposium on ‘Plasma Processing and Synthesis of Materials’ by Elsevier Science Publishing Co., Inc., MRS Annual Meeting, Boston (November 1983).Google Scholar
7. Suzuki, A., Suzuki, T., Nagaoka, Y., lawata, Y., Nippon Kingaku Gakkai Shuho, 32 (1968).Google Scholar
8. Hillert, M., “Some Thermodynamic Aspects on Phase Transformation in Ferrous Alloys,” Proceedings of the Darken Conference on Physical Chemistry in Metallurgy, pub. by U.S. Steel, 445–462 (1976).Google Scholar
9. Jackson, R.S., “The Austenite Liquidus Surface and Constitutional Diagram for the Fe-Cr-C Metastable System,” Journal of the Iron and Steel Institute, 208, 163/167 (1970).Google Scholar
10. Jones, H., “Some Principles of Solidification at High Cooling Rates, Rapid Solidification Processing,” edited by Mehrabian, R., Kear, B.H., Cohen, M., published by Claitor Publishing Div., Baton Rouge, LA, 28–45, (1978).Google Scholar