Hostname: page-component-848d4c4894-nr4z6 Total loading time: 0 Render date: 2024-04-30T11:50:30.852Z Has data issue: false hasContentIssue false
  • English
  • Français

Self-Organized V - Mo Oxide Fibers by the Micro-Pulling Down Method

Published online by Cambridge University Press:  15 March 2011

Detlef Klimm ,
Krzysztof Orlinski  and
Dorota A. Pawlak
Detlef Klimm
Affiliation:
Leibniz Institute for Crystal Growth, Max-Born-Str. 2, 12489 Berlin, Germany
Krzysztof Orlinski
Affiliation:
Institute of Electronic Materials Technology, 133 Wólczyńska Str., 01-919 Warsaw, Poland
Dorota A. Pawlak
Affiliation:
Institute of Electronic Materials Technology, 133 Wólczyńska Str., 01-919 Warsaw, Poland
Get access

Abstract

The V2O5-MoO3 mixtures offer a whole range of materials where properties can be adjusted by simple modification of experimental parameters, which may be utilized for manufacturing metamaterials with on-demand properties. The V2O5-MoO3 system contains an intermediate phase V9Mo6O40, with a small fraction of V4+ instead of V5+. Consequently, this system should rather be considered as pseudobinary. The V4+ content depends on the oxygen partial pressure in the atmosphere. Thus, by changing the oxygen partial pressure one can tailor the electric properties of the system, and by changing the supercooling, the morphologic structure of crystallized bodies as well. For better understanding of this system differential thermal analysis and thermodynamic modeling was performed. Fibers of eutectic composition between V9Mo6O40 and MoO3 were grown by the micro-pulling-down technique. X-ray diffraction confirmed the existence of the V9Mo6O40 intermediate phase.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1223 , 2009 , 1223-EE03-09
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pawlak, D. A., Kolodziejak, K., Turczynski, S., Kisielewski, J., Rożniatowski, K., Diduszko, R., Kaczkan, M., Malinowski, M., Chem. Mat., 18, 2450 (2006).Google Scholar
2. Pawlak, D. A., Scientia Plena 4, 014801 (2008).Google Scholar
3. Pawlak, D. A., “Manufacturing of self-organized structures” in Handbook of Artificial Materials Vol. II: Applications, CRC Press, 2009.Google Scholar
4. Chandra, A., Roberts, A.J., Slade, R.C.T., solid state commun. 147, 83 (2008).Google Scholar
5. Bielanski, A., Najbar, M., Appl. Catalysis A 157, 223 (1997).Google Scholar
6. Magnéli, A., Oughton, B.M., Acta Chemica Scandinavica 5, 581 (1951), and ibd. p. 585.Google Scholar
7. Bielanski, A., Dyrek, K., Pozniczek, J., Wenda, E., Bull. Acad. Pol. Sci., Ser. Sci. Chim., 19, 507 (1971). See also: “Phase Diagrams for Ceramists” (Americ. Ceram. Soc.), Fig. 5073.Google Scholar
8. Klimm, D., Ganschow, S., Schulz, D., Bertram, R., Uecker, R., Reiche, P., Fornari, R., J. Crystal Growth 311, 534 (2009).Google Scholar
9.FactSage 6.1, GTT Technologies, Herzogenrath (Germany) 2009.Google Scholar