Hostname: page-component-cb9f654ff-9b74x Total loading time: 0 Render date: 2025-08-22T23:23:09.973Z Has data issue: false hasContentIssue false
  • English
  • Français

A Study on Selective Etching of SiGe Layers in SiGe/Si Systems for Device Applications

Published online by Cambridge University Press:  01 February 2011

Takashi Yamazaki ,
Tomohide Sekikawa ,
Shinya Morita ,
Yoshitaka Hakamada ,
Hiroyuki Ohri ,
Shun-ichiro Ohmi  and
Tetsushi Sakai
Takashi Yamazaki
Affiliation:
Department of Information Processing, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology 4259 Nagatsuta, Midori-ku, Yokohama, Kanagawa 226–8502, Japan
Tomohide Sekikawa
Affiliation:
Department of Information Processing, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology 4259 Nagatsuta, Midori-ku, Yokohama, Kanagawa 226–8502, Japan
Shinya Morita
Affiliation:
Department of Information Processing, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology 4259 Nagatsuta, Midori-ku, Yokohama, Kanagawa 226–8502, Japan
Yoshitaka Hakamada
Affiliation:
Department of Information Processing, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology 4259 Nagatsuta, Midori-ku, Yokohama, Kanagawa 226–8502, Japan
Hiroyuki Ohri
Affiliation:
Department of Information Processing, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology 4259 Nagatsuta, Midori-ku, Yokohama, Kanagawa 226–8502, Japan
Shun-ichiro Ohmi
Affiliation:
Department of Information Processing, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology 4259 Nagatsuta, Midori-ku, Yokohama, Kanagawa 226–8502, Japan
Tetsushi Sakai
Affiliation:
Department of Information Processing, Interdisciplinary Graduate School of Science and Engineering, Tokyo Institute of Technology 4259 Nagatsuta, Midori-ku, Yokohama, Kanagawa 226–8502, Japan
Get access

Abstract

Selective etching of a SiGe layer for Si/SiGe/Si stacked layers was investigated for device applications. The SiGe layer is selectively and laterally etched by a HF:HNO3:H2O solution after patterning the layers. The selective etching rate of the SiGe layer increased as the Ge ratio increased. The etching rate of a SiGe layer annealed at 800°C did not change from an as-grown sample, and the Ge diffusion into Si was very small. However, the etching rate of a layer annealed at 1000°C was found to have decreased, and Ge diffused into Si in large amounts. This indicates that annealing at less than 800°C is suitable for device applications.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 795: Symposium U – Thin Films - Stresses and Mechanical Properties X , 2003 , U11.8
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1] Guarini, K. W. et al., IEDM Tech. Dig., 425 (2001).Google Scholar
[2] Hergenrother, J. M. et al., IEDM Tech. Dig., 75 (1999).Google Scholar
[3] Hisamoto, Digh et al., IEEE Trans. Electron Devices, vol. 47, 2320 (2000).Google Scholar
[4] Sakai, T., Ohmi, S., Sasaki, D., Sakuraba, M., and Murota, J., International SiGe Technology and Device Meeting, Meeting Abstract, 31, January (2003).Google Scholar
[5] Murota, J., and Ono, S., Jpn. J. Appl. Phys., Part 1, No. 4B, 2290 (1994).Google Scholar
[6] Godbey, D. J. et al., J. Electrochem. Soc., Vol. 139, No. 10, 2943 (1992).Google Scholar