Hostname: page-component-8448b6f56d-tj2md Total loading time: 0 Render date: 2024-04-24T17:09:28.186Z Has data issue: false hasContentIssue false
  • English
  • Français

Amine-Quinone Polyimides as Coatings that Protect Iron Against Corrosion.

Published online by Cambridge University Press:  01 February 2011

Mijeong Han ,
Huimin Bie ,
Garry W. Warren  and
David E. Nikles
Mijeong Han
Affiliation:
Center for Materials for Information Technology, The University of Alabama, Tuscaloosa, Alabama 35487–0209
Huimin Bie
Affiliation:
Center for Materials for Information Technology, The University of Alabama, Tuscaloosa, Alabama 35487–0209
Garry W. Warren
Affiliation:
Center for Materials for Information Technology, The University of Alabama, Tuscaloosa, Alabama 35487–0209
David E. Nikles
Affiliation:
Center for Materials for Information Technology, The University of Alabama, Tuscaloosa, Alabama 35487–0209
Get access

Abstract

A new diamine monomer was synthesized by condensing 4,4'-methylene dianiline with 1,4-benzoquinone. The monomer was condensed with 3,3',4,4'-benzophenone tetracarboxylic dianhydride to give a polyamic acid that was soluble in N-methyl-2-pyrrolidinone. The polyamic acid was cast onto iron and thermally imidized to give the amine-quinone polyimide (AQPI-2). AQPI-2 had a thermal decomposition temperature (10% weight loss) of 540°C and a glass transition near 290°C, values typical of polyimides. The degradation of the coating on iron after exposure to NaCl electrolyte was followed by electrochemical impedance spectroscopy. Under these conditions a conventional polyimide failed after 3 days exposure, while AQPI-2 showed no change after 34 days exposure. The adhesive bond between the amine-quinone polyimide and the iron surface was so strong that it could not be broken by the electrolyte.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 629: Symposium FF – Interfaces, Adhesion and Processing in Polymer Systems , 2000 , FF5.17
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kaleem, K., Chertok, F. and Erhan, S. Prog. Organ. Coatings, 1987, 15, 63–71 Google Scholar
2. Nithianandam, V. S., Chertok, F. and Erhan, S. J. Coating Technol., 1991, 63, 47–49 Google Scholar
3. Nikles, D. E., Liang, J.-L., Cain, J. L., Chacko, A. P., Webb, R. I. and Belmore, K. J. Polym. Sci., Pt A, Polym. Chem., 1995, 33, 2881–2886 Google Scholar
4. Nikles, D. E., Chacko, A. P., Liang, J.-L. and Webb, R. I. J. Polym. Sci., Pt A: Polym. Chem. 1999, 37, 2339–2345.Google Scholar
5. Arroyo, J. C., Warren, G. W., Nikles, D. E., NIST-IR. 5960, Proceedings 6th Int'I Workshop on Moisture in Microelectronics, Gaitherburg, MD 1996 Google Scholar
6. Sharma, R., Warren, G. W., Nikles, D., Hu, Y., and Street, S. Mat. Res. Soc. Symp. Proc. 1998, 517, 439–444.Google Scholar
7. Vaideeswaran, K., Bell, J. P. and Nikles, D. E. J. Adhes. Sci. Tech. 1999, 13(4), 477–499.Google Scholar
8. Han, M., Bie, H., Nikles, D. E. and Warren, G. W. submitted to J. Polym. Sci., Pt A, Poly. Chem.Google Scholar
9. ASTM Designation D 882–91 “Standard Test Methods for Tensile Properties of Thin Plastic Sheeting”Google Scholar
10. Jones, D. A. “Principles and Prevention of Corrosion” Macmillian Publishing Company: New York; 1992.Google Scholar