Hostname: page-component-848d4c4894-75dct Total loading time: 0 Render date: 2024-05-17T18:30:14.031Z Has data issue: false hasContentIssue false
  • English
  • Français

An Overview of Dry Etching Damage

Published online by Cambridge University Press:  22 February 2011

Stephen J. Fonash
Stephen J. Fonash*
Affiliation:
Electronic Materials and Processing Research Laboratory The Pennsylvania State University University Park, PA 16802
Get access

Abstract

Dry etching can inadvertently lead to two very different types of damage -- voltage stress damage due to dielectric wearout and plasma exposure damage due to particle and photon flux impingement. Voltage stress damage due to charge-up has beem widely studied. It is often areal in distribution; hence, it can be studied even with simple capacitor structures and capacitance-voltage measurements. All plasma exposure damage has an edge-type distribution. Consequently it requires more complicated structures and measurements for its detection.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 316: Symposium A – Materials Synthesis and Processing Using Ion Beams , 1993 , 977
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Fonash, S. J., “An overview of dry etching damage and contamination effects”, J. Electrochem. Soc., Vol. 137, 3885,(1990).Google Scholar
2 Shin, Hyungchevl, Jha, Neeta, Qian, Xue-Yu, Hills, Graham, and Hu, Chenming, “Plasma Etching Charge-up Damage to Thin Oxides”, Solid State Technol. p. 29–36, August, 1993.Google Scholar