Hostname: page-component-76fb5796d-vfjqv Total loading time: 0 Render date: 2024-04-26T16:47:46.427Z Has data issue: false hasContentIssue false
  • English
  • Français

Atomistic Modeling of the Ion Implantation Step Within a 2D Process Simulator

Published online by Cambridge University Press:  10 February 2011

Bruno Schmidt ,
Matthias Posselt ,
Norbert Strecker  and
Thomas Feudel
Bruno Schmidt
Affiliation:
Institute of Ion Beam Physics and Materials Research, Forschungszentrum Rossendorf, P.O. Box, 510 119, D-01314 Dresden, Germany
Matthias Posselt
Affiliation:
Institute of Ion Beam Physics and Materials Research, Forschungszentrum Rossendorf, P.O. Box, 510 119, D-01314 Dresden, Germany
Norbert Strecker
Affiliation:
Swiss Federal Institute of Technology, Integrated Systems Laboratory, Gloriastr. 35, CH-8092, Zürich, Switzerland
Thomas Feudel
Affiliation:
ISE Integrated Systems Engineering AG, Technopark Zürich, Technoparkstr. 1, CH-8005, Zürich, Switzerland
Get access

Abstract

2D calculations of as-implanted dopant profiles are performed using a new module of the process simulator DIOS which is based on the binary collision code Crystal-TRIM. Examples derived from MOS and trench technology are considered. Good lateral and depth resolution is achieved within an acceptable computing time by combining a trajectory splitting algorithm with a method for the lateral duplication of ion trajectories.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 490: Symposium Q – Semiconductor Process & Device Performance Modeling , 1997 , 21
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Posselt, M., Schmidt, B., Murthy, C.S., Feudel, T., and Suzuki, K., J. Electrochem. Soc. 144, 1496(1997).Google Scholar
2. Murthy, C. S., Posselt, M., and Frei, T., J. Vac. Sci. Techn. B14, 276 (1996).Google Scholar
3. Posselt, M., Rad. Eff. and Def. in Sol. 130/131, 87 (1994).Google Scholar
4. Strecker, N., DIOS-ISE, ISE TCAD Release 4.0, User's Manual, Zürich, (1997).Google Scholar
5. Bohmayr, W., Burenkov, A., Lorenz, J., Ryssel, H., and Selberherr, S., IEEE Trans. Semiconductor Man. 8, 402 (1995).Google Scholar
6. Yang, S.H., Lim, D., Morris, S., and Tasch, A.F., in Proc. NUPAD, p. 97 (1994).Google Scholar
7. Feudel, Thomas and Höfler, Alexander, TESIM, ISE TCAD Release 4.0, Version 4.5, Zürich 1997.Google Scholar
8. Schmidt, B., Posselt, M., Feudel, T., and Strecker, N., Computational Materials Science, to be published.Google Scholar